clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94275,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94276,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94277,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94278,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94279,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94280,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94281,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94282,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94283,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94284,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94285,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94286,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94287,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94288,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94289,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94290,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94291,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94292,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94293,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94294,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94295,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94296,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94297,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94298,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}},{"rowIdx":94299,"cells":{"content":{"kind":"string","value":"package body badger is\nend package body;\n\npackage body badger2 is\nend package body badger2;\n\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity accumulator is port (\n a: in std_logic_vector(3 downto 0);\n clk, reset: in std_logic;\n accum: out std_logic_vector(3 downto 0)\n );\nend accumulator;\n\narchitecture simple of accumulator is\n\nsignal accumL: unsigned(3 downto 0);\n\nbegin\n\n accumulate: process (clk, reset) begin\n if (reset = '1') then\n accumL <= \"0000\";\n elsif (clk'event and clk= '1') then\n accumL <= accumL + to_unsigned(a);\n end if;\n end process;\n\n accum <= std_logic_vector(accumL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity adder is port (\n a,b : in std_logic_vector (15 downto 0);\n sum: out std_logic_vector (15 downto 0)\n );\nend adder;\n\narchitecture dataflow of adder is\n\nbegin\n\n sum <= a + b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pAdderAttr is\n generic(n : integer := 8);\n port (a : in std_logic_vector(n - 1 downto 0);\n b : in std_logic_vector(n - 1 downto 0);\n cin : in std_logic;\n sum : out std_logic_vector(n - 1 downto 0);\n cout : out std_logic);\nend pAdderAttr;\n\n\narchitecture loopDemo of pAdderAttr is\n\nbegin\n\n process(a, b, cin)\n variable carry: std_logic_vector(sum'length downto 0);\n variable localSum: std_logic_vector(sum'high downto 0);\n\n begin\n\n carry(0) := cin;\n\n for i in sum'reverse_range loop\n localSum(i) := (a(i) xor b(i)) xor carry(i);\n carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));\n end loop;\n\n sum <= localSum;\n cout <= carry(carry'high - 1);\n\n end process;\n\nend loopDemo;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in unsigned(3 downto 0);\n sum: out unsigned(3 downto 0)\n );\nend adder;\n\narchitecture simple of adder is\n\nbegin\n\n sum <= a + b;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity asyncLoad is port (\n loadVal, d: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLoad;\n\narchitecture rtl of asyncLoad is\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n q <= loadVal;\n elsif (clk'event and clk = '1' ) then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity BidirBuf is port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: out std_logic_vector\n );\nend BidirBuf;\n\narchitecture behavioral of BidirBuf is\n\nbegin\n\n bidirBuf: process (OE, input) begin\n if (OE = '1') then\n output <= input;\n else\n output <= (others => 'Z');\n end if;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BidirCnt is port (\n OE: in std_logic;\n CntEnable: in std_logic;\n LdCnt: in std_logic;\n Clk: in std_logic;\n Rst: in std_logic;\n Cnt: inout std_logic_vector(3 downto 0)\n );\nend BidirCnt;\n\narchitecture behavioral of BidirCnt is\n\n component LoadCnt port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\n end component;\n\n component BidirBuf port (\n OE: in std_logic;\n input: in std_logic_vector;\n output: inout std_logic_vector\n );\n end component;\n\nsignal CntVal: std_logic_vector(3 downto 0);\nsignal LoadVal: std_logic_vector(3 downto 0);\n\nbegin\n\n u1: loadcnt port map (CntEn => CntEnable,\n LdCnt => LdCnt,\n LdData => LoadVal,\n Clk => Clk,\n Rst => Rst,\n CntVal => CntVal\n );\n\n u2: bidirbuf port map (OE => oe,\n input => CntVal,\n output => Cnt\n );\n\n LoadVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity bidirbuffer is port (\n input: in std_logic;\n enable: in std_logic;\n feedback: out std_logic;\n output: inout std_logic\n );\nend bidirbuffer;\n\narchitecture structural of bidirbuffer is\n\nbegin\n\n u1: bidir port map (ip => input,\n oe => enable,\n op_fb => feedback,\n op => output\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity clkGen is port (\n clk: in std_logic;\n reset: in std_logic;\n ClkDiv2, ClkDiv4,\n ClkDiv6,ClkDiv8: out std_logic\n );\nend clkGen;\n \narchitecture behav of clkGen is\n\nsubtype numClks is std_logic_vector(1 to 4);\nsubtype numPatterns is integer range 0 to 11;\n\ntype clkTableType is array (numpatterns'low to numPatterns'high) of numClks;\n\nconstant clkTable: clkTableType := clkTableType'(\n-- ClkDiv8______\n-- ClkDiv6_____ |\n-- ClkDiv4____ ||\n-- ClkDiv2 __ |||\n-- ||||\n \"1111\",\n \"0111\",\n \"1011\",\n \"0001\",\n \"1100\",\n \"0100\",\n \"1010\",\n \"0010\",\n \"1111\",\n \"0001\",\n \"1001\",\n \"0101\"); \n\nsignal index: numPatterns;\n \nbegin\n\n lookupTable: process (clk, reset) begin\n if reset = '1' then\n index <= 0;\n elsif (clk'event and clk = '1') then\n if index = numPatterns'high then\n index <= numPatterns'low;\n else\n index <= index + 1;\n end if;\n end if;\n end process;\n\n (ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n enable: in std_logic;\n reset: in std_logic;\n count: buffer unsigned(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n count <= \"0000\";\n elsif(clk'event and clk = '1') then\n if enable = '1' then\n count <= count + 1;\n else\n count <= count;\n end if;\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.scaleable.all;\n\nentity count8 is port (\n clk: in std_logic;\n rst: in std_logic;\n count: out std_logic_vector(7 downto 0)\n );\nend count8;\n\narchitecture structural of count8 is\n\nbegin\n\n u1: scaleUpCnt port map (clk => clk,\n reset => rst,\n cnt => count\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 9)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 9);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(3,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(9 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(9 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= to_unsigned(0,10);\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n enable: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n elsif (enable = '1') then\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n load: in std_logic;\n data: in std_logic_vector(3 downto 0);\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n if (load = '1') then\n countL <= to_unsigned(data);\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity Cnt4Term is port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic\n );\nend Cnt4Term;\n\narchitecture behavioral of Cnt4Term is\n\nsignal CntL: unsigned(3 downto 0);\n\nbegin\n\n increment: process begin\n wait until clk = '1';\n CntL <= CntL + 1;\n end process;\n\n Cnt <= to_stdlogicvector(CntL);\n\n TermCnt <= '1' when CntL = \"1111\" else '0';\n\nend behavioral;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity Counter is port (\n clock: in std_logic;\n Count: out std_logic_vector(3 downto 0)\n );\nend Counter;\n\narchitecture structural of Counter is\n\n component Cnt4Term port (\n clk: in std_logic;\n Cnt: out std_logic_vector(3 downto 0);\n TermCnt: out std_logic);\n end component;\n\nbegin\n\n u1: Cnt4Term port map (clk => clock,\n Cnt => Count,\n TermCnt => open\n );\n\nend structural;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if(clk'event and clk = '1') then\n if (reset = '1') then\n countL <= \"0000\";\n else\n countL <= countL + 1;\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity convertArith is port (\n truncate: out unsigned(3 downto 0);\n extend: out unsigned(15 downto 0);\n direction: out unsigned(0 to 7)\n );\nend convertArith;\n\narchitecture simple of convertArith is\n\nconstant Const: unsigned(7 downto 0) := \"00111010\";\n\nbegin\n\n truncate <= resize(Const, truncate'length);\n extend <= resize(Const, extend'length);\n direction <= resize(Const, direction'length);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nconstant THREE: std_logic_vector(1 downto 0) := \"11\";\n\nbegin\n\n y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';\n\nend concurrent;\n-- incorporates Errata 12.1\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity typeConvert is port (\n a: out unsigned(7 downto 0)\n );\nend typeConvert;\n\narchitecture simple of typeConvert is\n\nconstant Const: natural := 43;\n\nbegin\n\n a <= To_unsigned(Const,8);\n\nend simple;\n-- Incorporates Errata 5.4 \n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk) begin\n if (clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n\n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(0 to 3)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(0 to 3);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"0000\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if reset = '1' then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + 1;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity counter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend counter;\n\narchitecture simple of counter is\n\nsignal countL: unsigned(3 downto 0);\n\nbegin\n\n increment: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1001\";\n elsif(clk'event and clk = '1') then\n countL <= countL + \"0001\";\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.decProcs.all;\n\nentity decoder is port (\n decIn: in std_logic_vector(1 downto 0);\n decOut: out std_logic_vector(3 downto 0)\n );\nend decoder;\n\narchitecture simple of decoder is\n\nbegin\n\n DEC2x4(decIn,decOut);\n\nend simple;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n decOut_n: out std_logic_vector(5 downto 0)\n\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n alias sio_dec_n: std_logic is decOut_n(5);\n alias rst_ctrl_rd_n: std_logic is decOut_n(4);\n alias atc_stat_rd_n: std_logic is decOut_n(3);\n alias mgmt_stat_rd_n: std_logic is decOut_n(2);\n alias io_int_stat_rd_n: std_logic is decOut_n(1);\n alias int_ctrl_rd_n: std_logic is decOut_n(0);\n\n alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);\n alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);\n\nbegin\n\n decoder: process (upper, CtrlBits)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case upper is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case CtrlBits is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n\t\t\t\t\t\n end case;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';\n\n int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IntCtrlReg) else '1';\n\n io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = IoIntStatReg) else '1';\n\n rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = RstCtrlReg) else '1';\n\n atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = AtcStatusReg) else '1';\n\n mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)\n and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';\n\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process (dev_adr, cs0_n)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n sio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n int_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n io_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n rst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n atc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n mgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n else\n null;\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n cs0_n: in std_logic;\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\n signal Lsio_dec_n: std_logic;\n signal Lrst_ctrl_rd_n: std_logic;\n signal Latc_stat_rd_n: std_logic;\n signal Lmgmt_stat_rd_n: std_logic;\n signal Lio_int_stat_rd_n: std_logic;\n signal Lint_ctrl_rd_n: std_logic;\n\nbegin\n\n decoder: process (dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n Lsio_dec_n <= '1';\n Lint_ctrl_rd_n <= '1';\n Lio_int_stat_rd_n <= '1';\n Lrst_ctrl_rd_n <= '1';\n Latc_stat_rd_n <= '1';\n Lmgmt_stat_rd_n <= '1';\n\n case dev_adr(19 downto 17) is \n\n when SuperIoRange =>\n Lsio_dec_n <= '0';\n\t\t\n when CtrlRegRange =>\n\n case dev_adr(16 downto 0) is\n\t\t\t\n when IntCtrlReg =>\n Lint_ctrl_rd_n <= '0';\n\n when IoIntStatReg =>\n Lio_int_stat_rd_n <= '0';\n\n when RstCtrlReg =>\n Lrst_ctrl_rd_n <= '0';\n\n when AtcStatusReg =>\n Latc_stat_rd_n <= '0';\n\n when MgmtStatusReg =>\n Lmgmt_stat_rd_n <= '0';\n\n when others =>\n null;\n\t\t\t\t\t\t\t\n end case;\n\n when others =>\n null; \n \n end case;\n\n end process decoder;\n\n qualify: process (cs0_n) begin\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if (cs0_n = '0') then\n sio_dec_n <= Lsio_dec_n;\n int_ctrl_rd_n <= Lint_ctrl_rd_n;\n io_int_stat_rd_n <= Lio_int_stat_rd_n;\n rst_ctrl_rd_n <= Lrst_ctrl_rd_n;\n atc_stat_rd_n <= Latc_stat_rd_n;\n mgmt_stat_rd_n <= Lmgmt_stat_rd_n;\n else\n null;\n end if;\n end process qualify;\n\nend synthesis;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n: out std_logic;\n int_ctrl_rd_n: out std_logic\n);\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n\n decoder: process ( dev_adr)\n begin \n -- Set defaults for outputs - for synthesis reasons.\n\n sio_dec_n <= '1';\n int_ctrl_rd_n <= '1';\n io_int_stat_rd_n <= '1';\n rst_ctrl_rd_n <= '1';\n atc_stat_rd_n <= '1';\n mgmt_stat_rd_n <= '1';\n\n if dev_adr(19 downto 17) = SuperIOrange then\n\n sio_dec_n <= '0';\n\n elsif dev_adr(19 downto 17) = CtrlRegrange then\n\n if dev_adr(16 downto 0) = IntCtrlReg then\n\n int_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0)= IoIntStatReg then\n\n io_int_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = RstCtrlReg then\n\n rst_ctrl_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = AtcStatusReg then\n\n atc_stat_rd_n <= '0';\n\n elsif dev_adr(16 downto 0) = MgmtStatusReg then\n\n mgmt_stat_rd_n <= '0';\n\n else\n\n null;\n\t\t\t\t\t\t\t\n end if;\n\n else\n\n null;\n\n end if;\n\n end process decoder;\n\nend synthesis;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n );\nend decProcs;\n\npackage body decProcs is\n\n procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);\n decode: out std_logic_vector(3 downto 0)\n ) is\n begin\n case inputs is\n when \"11\" =>\n decode := \"1000\";\n when \"10\" =>\n decode := \"0100\";\n when \"01\" =>\n decode := \"0010\";\n when \"00\" =>\n decode := \"0001\";\n when others =>\n decode := \"0001\";\n end case;\n end DEC2x4;\n\nend decProcs;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity isa_dec is port\n(\n dev_adr: in std_logic_vector(19 downto 0);\n\n sio_dec_n: out std_logic;\n rst_ctrl_rd_n: out std_logic;\n atc_stat_rd_n: out std_logic;\n mgmt_stat_rd_n: out std_logic;\n io_int_stat_rd_n:out std_logic;\n int_ctrl_rd_n: out std_logic\n );\nend isa_dec;\n\n\narchitecture synthesis of isa_dec is\n\n constant CtrlRegRange: std_logic_vector(2 downto 0) := \"100\";\n constant SuperIoRange: std_logic_vector(2 downto 0) := \"010\";\n\n constant IntCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000000\";\n constant IoIntStatReg: std_logic_vector(16 downto 0) := \"00000000000000001\";\n constant RstCtrlReg: std_logic_vector(16 downto 0) := \"00000000000000010\";\n constant AtcStatusReg: std_logic_vector(16 downto 0) := \"00000000000000011\";\n constant MgmtStatusReg:std_logic_vector(16 downto 0) := \"00000000000000100\";\n\nbegin\n with dev_adr(19 downto 17) select\n sio_dec_n <= '0' when SuperIORange,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,\n '1' when others;\n\n with dev_adr(19 downto 0) select\n mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,\n '1' when others;\n\n\nend synthesis;\n-- Incorporates Errata 5.1 and 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal delayCnt, pulseCnt: unsigned(7 downto 0);\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nbegin\n\n delayReg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)\n pulseCntVal <= unsigned(data);\n end if;\n end if;\n end process;\n\n pulseDelay: process (clk, reset) begin\n if (reset = '1') then\n delayCnt <= \"11111111\";\n elsif(clk'event and clk = '1') then\n if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)\n delayCnt <= delayCntVal;\n elsif endPulse = '1' then\n delayCnt <= delayCnt - 1;\n end if;\n end if;\n end process;\n\n startPulse <= '1' when delayCnt = \"00000000\" else '0';\n\n pulseLength: process (clk, reset) begin\n if (reset = '1') then\n pulseCnt <= \"11111111\";\n elsif (clk'event and clk = '1') then\n if (loadLength = '1') then\n pulseCnt <= pulseCntVal;\n elsif (startPulse = '1' and endPulse = '1') then\n pulseCnt <= pulseCntVal;\n elsif (endPulse = '1') then\n pulseCnt <= pulseCnt;\n else\n pulseCnt <= pulseCnt - 1;\n end if;\n end if;\n end process;\n\n endPulse <= '1' when pulseCnt = \"00000000\" else '0';\n\n pulseOutput: process (clk, reset) begin\n if (reset = '1') then\n pulse <= '0';\n elsif (clk'event and clk = '1') then\n if (startPulse = '1') then\n pulse <= '1';\n elsif (endPulse = '1') then\n pulse <= '0';\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q: out std_logic;\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, a,b,c) begin\n if ((a = '1' and b = '1') or c = '1') then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n a,b,c : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nsignal localRst: std_logic;\n\nbegin\n\n localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';\n\n process (clk, localRst) begin\n if localRst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n arst: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q <= '0';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n aset : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, aset) begin\n if aset = '1' then\n q <= '1';\n elsif clk'event and clk = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n arst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk, arst) begin\n if arst = '1' then\n q1 <= '0';\n q2 <= '1';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n wait on clk;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n envector: in std_logic_vector(7 downto 0);\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if envector = \"10010111\" then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if en = '1' then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (prst = '1') then\n q <= '1';\n elsif (rst = '1') then\n q <= '0';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity flipFlop is port (\n clock, input: in std_logic;\n ffOut: out std_logic\n );\nend flipFlop;\n\narchitecture simple of flipFlop is\n\n procedure dff (signal clk: in std_logic;\n signal d: in std_logic;\n signal q: out std_logic\n ) is\n begin\n if clk'event and clk = '1' then\n q <= d;\n end if;\n end procedure dff;\n\nbegin\n\n dff(clock, input, ffOut);\n\nend simple;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n end: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1, d2: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q1, q2: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq1 <= '0';\n\tq2 <= '1';\n else\n q1 <= d1;\n q2 <= d2;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe_sr is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n rst,prst: in std_logic;\n q: out std_logic\n );\nend struct_dffe_sr;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe_sr is\n\nbegin\n\n ff: dffe_sr port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n rst => rst,\n prst => prst,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n srst : in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n if clk'event and clk = '1' then\n if srst = '1' then\n\tq <= '0';\n else\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dffe is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dffe;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dffe is\n\nbegin\n\n ff: dffe port map (\n\td => d,\n\tclk => clk,\n\ten => en,\n\tq => q\n );\n\nend instance;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity dffTri is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend dffTri;\n\narchitecture parameterize of dffTri is\n\ntype tribufType is record\n ip: std_logic;\n oe: std_logic;\n op: std_logic;\nend record;\n\ntype tribufArrayType is array (integer range <>) of tribufType;\n\nsignal tri: tribufArrayType(size - 1 downto 0);\n\nbegin\n\n g0: for i in 0 to size - 1 generate\n u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);\n end generate;\n\n g1: for i in 0 to size - 1 generate\n u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);\n tri(i).oe <= op_enable;\n qout(i) <= tri(i).op;\n end generate;\n\nend parameterize;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic bus\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nsignal qLocal: std_logic;\n\nbegin\n\n qLocal <= d when en = '1' else qLocal;\n\n q <= qLocal;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en, d) begin\n if en = '1' then\n q <= d;\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity struct_dlatch is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend struct_dlatch;\n\nuse work.primitive.all;\n\narchitecture instance of struct_dlatch is\n\nbegin\n\n latch: dlatchh port map (\n\td => d,\n\ten => en,\n\tq => q\n );\n\nend instance;\n-- Incorporates Errata 5.4\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity downCounter is port (\n clk: in std_logic;\n reset: in std_logic;\n count: out std_logic_vector(3 downto 0)\n );\nend downCounter;\n\narchitecture simple of downCounter is\n\nsignal countL: unsigned(3 downto 0);\nsignal termCnt: std_logic;\n\nbegin\n\n decrement: process (clk, reset) begin\n if (reset = '1') then\n countL <= \"1011\"; -- Reset to 11\n termCnt <= '1';\n elsif(clk'event and clk = '1') then\n if (termCnt = '1') then\n countL <= \"1011\"; -- Count rolls over to 11\n else\n countL <= countL - 1;\n end if;\n\n if (countL = \"0001\") then -- Terminal count decoded 1 cycle earlier\n termCnt <= '1';\n else\n termCnt <= '0';\n end if;\n end if;\n end process;\n \n count <= std_logic_vector(countL);\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity compareDC is port (\n addressBus: in std_logic_vector(31 downto 0);\n addressHit: out std_logic\n );\nend compareDC;\n\narchitecture wontWork of compareDC is\n\nbegin\n\n compare: process(addressBus) begin\n if (addressBus = \"011110101011--------------------\") then\n addressHit <= '1';\n else\n addressHit <= '0';\n end if;\n end process compare;\n\nend wontWork;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n\n encode: process (invec) begin\n case invec is\n when \"00000001\" =>\n enc_out <= \"000\";\n\n when \"00000010\" =>\n enc_out <= \"001\";\n\n when \"00000100\" =>\n enc_out <= \"010\";\n\n when \"00001000\" =>\n enc_out <= \"011\";\n\n when \"00010000\" =>\n enc_out <= \"100\";\n\n when \"00100000\" =>\n enc_out <= \"101\";\n\n when \"01000000\" =>\n enc_out <= \"110\";\n\n when \"10000000\" =>\n enc_out <= \"111\";\n\n when others =>\n enc_out <= \"000\";\n\n end case;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity encoder is\n port (invec:in std_logic_vector(7 downto 0);\n enc_out:out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\nbegin\n process (invec)\n begin\n if invec(7) = '1' then\n enc_out <= \"111\";\n\n elsif invec(6) = '1' then\n enc_out <= \"110\";\n\n elsif invec(5) = '1' then\n enc_out <= \"101\";\n\n elsif invec(4) = '1' then\n enc_out <= \"100\";\n\n elsif invec(3) = '1' then\n enc_out <= \"011\";\n\n elsif invec(2) = '1' then\n enc_out <= \"010\";\n\n elsif invec(1) = '1' then\n enc_out <= \"001\";\n\n elsif invec(0) = '1' then\n enc_out <= \"000\";\n\n else \n enc_out <= \"000\";\n end if; \n end process;\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nentity encoder is\n port (invec: in std_logic_vector(7 downto 0);\n enc_out: out std_logic_vector(2 downto 0)\n );\nend encoder;\n\narchitecture rtl of encoder is\n\nbegin\n enc_out <= \"111\" when invec(7) = '1' else\n \"110\" when invec(6) = '1' else\n \"101\" when invec(5) = '1' else\n \"100\" when invec(4) = '1' else\n \"011\" when invec(3) = '1' else\n \"010\" when invec(2) = '1' else\n \"001\" when invec(1) = '1' else\n \"000\" when invec(0) = '1' else\n \"000\";\n\nend rtl;\n-- includes Errata 5.2\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all; -- errata 5.2\n\nentity compare is port (\n ina: in std_logic_vector (3 downto 0);\n inb: in std_logic_vector (2 downto 0);\n equal: out std_logic\n );\nend compare;\n\narchitecture simple of compare is\n\nbegin\n\n equalProc: process (ina, inb) begin\n if (ina = inb ) then\n equal <= '1';\n else\n equal <= '0';\n end if;\n end process;\n\nend simple;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture behavioral of LogicFcn is\n\nbegin\n\n fcn: process (A,B,C) begin\n\n if (A = '0' and B = '0') then\n Y <= '1';\n elsif C = '1' then\n Y <= '1';\n else\n Y <= '0';\n end if;\n\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture dataflow of LogicFcn is\n\nbegin\n\n Y <= '1' when (A = '0' AND B = '0') OR\n (C = '1')\n else '0';\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse work.primitive.all;\n\nentity LogicFcn is port (\n A: in std_logic;\n B: in std_logic;\n C: in std_logic;\n Y: out std_logic\n );\nend LogicFcn;\n\narchitecture structural of LogicFcn is\n\nsignal notA, notB, andSignal: std_logic;\n\nbegin\n\n i1: inverter port map (i => A,\n o => notA);\n\n i2: inverter port map (i => B,\n o => notB);\n\n a1: and2 port map (i1 => notA,\n i2 => notB,\n y => andSignal);\n\n o1: or2 port map (i1 => andSignal,\n i2 => C,\n y => Y);\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is port (\n D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nconstant tCQ: time := 8 ns;\nconstant tS: time := 4 ns;\nconstant tH: time := 3 ns;\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process (clk) begin\n wait until clk = '1';\n q <= d;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n q <= d;\n\n wait on clk;\n end process;\n\nend rtl;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for all: AND2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nconfiguration SimpleGatesCfg of FEWGATES is\n\n for structural\n\n for u1: and2\n use entity work.and2(rtl);\n end for;\n\n for u2: and2\n use entity work.and2(rtl);\n end for;\n\n for u3: inverter\n use entity work.inverter(rtl);\n end for;\n\n for u4: or2\n use entity work.or2(rtl);\n end for;\n\n end for;\n\nend SimpleGatesCfg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.and2;\nuse work.or2;\nuse work.inverter;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\n-- Configution specifications\n\nfor all: and2 use entity work.and2(rtl);\nfor u3: inverter use entity work.inverter(rtl);\nfor u4: or2 use entity work.or2(rtl);\n\nbegin\n\n u1: and2 port map (i1 => a, i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c, i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\nuse work.GatesPkg.all;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture concurrent of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n a_and_b <= '1' when a = '1' and b = '1' else '0';\n c_and_d <= '1' when c = '1' and d = '1' else '0';\n\n not_c_and_d <= not c_and_d;\n\n y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage GatesPkg is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nend GatesPkg;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 =>c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (a => c_and_d,\n y => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\n\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity FEWGATES is port (\n a,b,c,d: in std_logic;\n y: out std_logic\n );\nend FEWGATES;\n\narchitecture structural of FEWGATES is\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\nsignal a_and_b, c_and_d, not_c_and_d: std_logic;\n\nbegin\n\n u1: and2 port map (i1 => a ,\n i2 => b,\n y => a_and_b\n );\n\n u2: and2 port map (i1 => c,\n i2 => d,\n y => c_and_d\n );\n\n u3: inverter port map (i => c_and_d,\n o => not_c_and_d);\n\n u4: or2 port map (i1 => a_and_b,\n i2 => not_c_and_d,\n y => y\n );\nend structural;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.simPrimitives.all;\n\nentity simHierarchy is port (\n A, B, Clk: in std_logic;\n Y: out std_logic\n );\nend simHierarchy;\n\narchitecture hierarchical of simHierarchy is\n\nsignal ADly, BDly, OrGateDly, ClkDly: std_logic;\nsignal OrGate, FlopOut: std_logic;\n\nbegin\n\n ADly <= transport A after 2 ns;\n BDly <= transport B after 2 ns;\n OrGateDly <= transport OrGate after 1.5 ns;\n ClkDly <= transport Clk after 1 ns;\n\n u1: OR2 generic map (tPD => 10 ns)\n port map ( I1 => ADly,\n I2 => BDly,\n Y => OrGate\n );\n\n u2: simDFF generic map ( tS => 4 ns,\n tH => 3 ns,\n tCQ => 8 ns\n )\n port map ( D => OrGateDly,\n Clk => ClkDly,\n Q => FlopOut\n );\n\n Y <= transport FlopOut after 2 ns;\n\nend hierarchical;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n--------------------------------------------------------------------------------\n--| File name : $RCSfile: io1164.vhd $\n--| Library : SUPPORT\n--| Revision : $Revision: 1.1 $\n--| Author(s) : Vantage Analysis Systems, Inc; Des Young\n--| Integration : Des Young\n--| Creation : Nov 1995\n--| Status : $State: Exp $\n--|\n--| Purpose : IO routines for std_logic_1164.\n--| Assumptions : Numbers use radixed character set with no prefix.\n--| Limitations : Does not read VHDL pound-radixed numbers.\n--| Known Errors: none\n--|\n--| Description:\n--| This is a modified library. The source is basically that donated by\n--| Vantage to libutil. Des Young removed std_ulogic_vector support (to\n--| conform to synthesizable libraries), and added read_oct/hex to integer.\n--|\n--| =======================================================================\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights\n--| reserved. This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package VHDL source\n--| Package Name: somelib.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types\n--| in manner consistent with TEXTIO package.\n--| * Provides procedures to read and write logic values as\n--| binary, octal, or hexadecimal values ('X' as appropriate).\n--| These should be particularly useful for models\n--| to read in stimulus as 0/1/x or octal or hex.\n--| Subprograms :\n--| Notes : \n--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94\n--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95\n--| (This is because that type is not supported for synthesis).\n--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95\n--|\n--| =======================================================================\n--| Extra routines by Des Young, des@alantec.com. 1995. GNU copyright.\n--| =======================================================================\n--|\n--------------------------------------------------------------------------------\n\nlibrary ieee;\npackage io1164 is\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- import std_logic package\n use ieee.std_logic_1164.all;\n\n -- import textio package\n use std.textio.all;\n\n --\n -- the READ and WRITE procedures act similarly to the procedures in the\n -- STD.TEXTIO package. for each type, there are two read procedures and\n -- one write procedure for converting between character and internal\n -- representations of values. each value is represented as the string of\n -- characters that you would use in VHDL code. (remember that apostrophes\n -- and quotation marks are not used.) input is case-insensitive. output\n -- is in upper case. see the following LRM sections for more information:\n --\n -- 2.3 - Subprogram Overloading\n -- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)\n -- 7.3.6 - Allocators (allocators create access values)\n -- 14.3 - Package TEXTIO\n --\n\n -- Note that the procedures for std_ulogic will match calls with the value\n -- parameter of type std_logic.\n\n --\n -- declare READ procedures to overload like in TEXTIO\n --\n procedure read(l: inout line; value: out std_ulogic ; good: out boolean);\n procedure read(l: inout line; value: out std_ulogic );\n procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);\n procedure read(l: inout line; value: out std_logic_vector );\n\n --\n -- declare WRITE procedures to overload like in TEXTIO\n --\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 );\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 );\n\n --\n -- declare procedures to convert between logic values and octal\n -- or hexadecimal ('X' where appropriate).\n --\n\n -- octal / std_logic_vector\n procedure read_oct (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_oct (l : inout line ;\n value : out std_logic_vector );\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- hexadecimal / std_logic_vector\n procedure read_hex (l : inout line ;\n value : out std_logic_vector ;\n good : out boolean );\n procedure read_hex (l : inout line ;\n value : out std_logic_vector );\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified : in side := right;\n field : in width := 0 );\n\n -- read a number into an integer\n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_oct(l : inout line;\n value : out integer);\n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean);\n procedure read_hex(l : inout line;\n value : out integer);\n\nend io1164;\n\n--------------------------------------------------------------------------------\n--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved\n--| This package is provided by Vantage Analysis Systems.\n--| The package may not be sold without the express written consent of\n--| Vantage Analysis Systems, Inc.\n--|\n--| The VHDL for this package may be copied and/or distributed as long as\n--| this copyright notice is retained in the source and any modifications\n--| are clearly marked in the History: list.\n--|\n--| Title : IO1164 package body VHDL source\n--| Package Name: VANTAGE_LOGIC.IO1164\n--| File Name : io1164.vhdl\n--| Author(s) : dbb\n--| Purpose : source for IO1164 package body\n--| Subprograms :\n--| Notes : see package declaration\n--| History : see package declaration\n--------------------------------------------------------------------------------\n\npackage body io1164 is\n\n\n --$ !VANTAGE_METACOMMENTS_ON\n --$ !VANTAGE_DNA_ON\n\n -- define lowercase conversion of characters for canonical comparison\n type char2char_t is array (character'low to character'high) of character;\n constant lowcase: char2char_t := (\n nul, soh, stx, etx, eot, enq, ack, bel,\n bs, ht, lf, vt, ff, cr, so, si,\n dle, dc1, dc2, dc3, dc4, nak, syn, etb,\n can, em, sub, esc, fsp, gsp, rsp, usp, \n\n ' ', '!', '\"', '#', '$', '%', '&', ''',\n '(', ')', '*', '+', ',', '-', '.', '/',\n '0', '1', '2', '3', '4', '5', '6', '7',\n '8', '9', ':', ';', '<', '=', '>', '?',\n\n '@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '[', '\\', ']', '^', '_',\n\n '`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',\n 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',\n 'p', 'q', 'r', 's', 't', 'u', 'v', 'w',\n 'x', 'y', 'z', '{', '|', '}', '~', del);\n\n -- define conversions between various types\n\n -- logic -> character\n type f_logic_to_character_t is \n array (std_ulogic'low to std_ulogic'high) of character;\n constant f_logic_to_character : f_logic_to_character_t := \n ( \n 'U' => 'U', \n 'X' => 'X',\n '0' => '0',\n '1' => '1',\n 'Z' => 'Z',\n 'W' => 'W',\n 'L' => 'L',\n 'H' => 'H',\n '-' => '-'\n );\n\n -- character, integer, logic\n\n constant x_charcode : integer := -1;\n constant maxoct_charcode: integer := 7;\n constant maxhex_charcode: integer := 15;\n constant bad_charcode : integer := integer'left;\n\n type digit2int_t is \n array ( character'low to character'high ) of integer;\n constant octdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n constant hexdigit2int: digit2int_t := (\n '0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,\n '5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9, \n 'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,\n 'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,\n 'X' | 'x' => x_charcode, others => bad_charcode );\n\n constant oct_bits_per_digit: integer := 3;\n constant hex_bits_per_digit: integer := 4;\n\n type int2octdigit_t is \n array ( 0 to maxoct_charcode ) of character;\n constant int2octdigit: int2octdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7' );\n\n type int2hexdigit_t is \n array ( 0 to maxhex_charcode ) of character;\n constant int2hexdigit: int2hexdigit_t :=\n ( 0 => '0', 1 => '1', 2 => '2', 3 => '3',\n 4 => '4', 5 => '5', 6 => '6', 7 => '7',\n 8 => '8', 9 => '9', 10 => 'A', 11 => 'B',\n 12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );\n\n type oct_logic_vector_t is\n array(1 to oct_bits_per_digit) of std_ulogic;\n type octint2logic_t is \n array (x_charcode to maxoct_charcode) of oct_logic_vector_t;\n constant octint2logic : octint2logic_t := (\n ( 'X', 'X', 'X' ),\n ( '0', '0', '0' ),\n ( '0', '0', '1' ),\n ( '0', '1', '0' ),\n ( '0', '1', '1' ),\n ( '1', '0', '0' ),\n ( '1', '0', '1' ),\n ( '1', '1', '0' ),\n ( '1', '1', '1' )\n );\n\n type hex_logic_vector_t is\n array(1 to hex_bits_per_digit) of std_ulogic;\n type hexint2logic_t is \n array (x_charcode to maxhex_charcode) of hex_logic_vector_t;\n constant hexint2logic : hexint2logic_t := (\n ( 'X', 'X', 'X', 'X' ),\n ( '0', '0', '0', '0' ),\n ( '0', '0', '0', '1' ),\n ( '0', '0', '1', '0' ),\n ( '0', '0', '1', '1' ),\n ( '0', '1', '0', '0' ),\n ( '0', '1', '0', '1' ),\n ( '0', '1', '1', '0' ),\n ( '0', '1', '1', '1' ),\n ( '1', '0', '0', '0' ),\n ( '1', '0', '0', '1' ),\n ( '1', '0', '1', '0' ),\n ( '1', '0', '1', '1' ),\n ( '1', '1', '0', '0' ),\n ( '1', '1', '0', '1' ),\n ( '1', '1', '1', '0' ),\n ( '1', '1', '1', '1' )\n );\n\n ----------------------------------------------------------------------------\n -- READ procedure bodies\n --\n -- The strategy for duplicating TEXTIO's overloading of procedures\n -- with and without GOOD parameters is to put all the logic in the\n -- version with the GOOD parameter and to have the version without\n -- GOOD approximate a runtime error by use of an assertion.\n --\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is\n\n variable c : character; -- char read while looping\n variable m : line; -- safe copy of L\n variable success: boolean := false; -- readable version of GOOD\n variable done : boolean := false; -- flag to say done reading chars\n\n begin\n\n --\n -- algorithm:\n -- \n -- if there are characters in the line\n -- save a copy of the line\n -- get the next character\n -- if got one\n -- set value\n -- if all ok\n -- free temp copy\n -- else\n -- free passed in line\n -- assign copy back to line\n -- set GOOD\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n \n -- grab the next character\n read( l, c, success );\n\n -- if read ok \n if success then\n\n--\n-- an issue here is whether lower-case values should be accepted or not\n--\n\n -- determine the value \n case c is\n when 'U' | 'u' => value := 'U';\n when 'X' | 'x' => value := 'X';\n when '0' => value := '0';\n when '1' => value := '1';\n when 'Z' | 'z' => value := 'Z';\n when 'W' | 'w' => value := 'W';\n when 'L' | 'l' => value := 'L';\n when 'H' | 'h' => value := 'H';\n when '-' => value := '-';\n when others => success := false;\n end case;\n\n end if;\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n end if; -- non null access, non empty string\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read( l: inout line; value: out std_ulogic ) is\n variable success: boolean; -- internal good flag\n begin\n read( l, value, success ); -- use safe version\n assert success \n report \"IO1164.READ: Unable to read STD_ULOGIC value.\" \n severity error;\n end read;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read(l : inout line ; \n value: out std_logic_vector;\n good : out boolean ) is\n\n variable m : line ; -- saved copy of L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- value for one array element\n variable c : character ; -- read a character\n\n begin\n\n --\n -- algorithm:\n -- \n -- this procedure strips off leading whitespace, and then calls the\n -- READ procedure for each single logic value element in the output\n -- array.\n -- \n\n -- only operate on lines that contain characters\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save a copy of string in case read fails\n m := new string'( l.all );\n\n -- loop for each element in output array\n for i in value'range loop\n\n -- prohibit internal blanks\n if i /= value'left then\n if l.all'length = 0 then\n success := false;\n exit;\n end if;\n c := l.all(l.all'left);\n if c = ' ' or c = ht then\n success := false;\n exit;\n end if;\n end if;\n\n -- read the next logic value\n read( l, logic_value, success );\n\n -- stuff the value in if ok, else bail out\n if success then\n value( i ) := logic_value;\n else\n exit;\n end if;\n\n end loop; -- each element in output array\n\n -- free working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n elsif ( value'length /= 0 ) then\n -- string is empty but the return array has 1+ elements\n success := false;\n end if;\n\n -- set output parameter\n good := success;\n\n end read;\n\n procedure read(l: inout line; value: out std_logic_vector ) is\n variable success: boolean;\n begin\n read( l, value, success );\n assert success \n report \"IO1164.READ: Unable to read T_WLOGIC_VECTOR value.\" \n severity error;\n end read;\n\n ----------------------------------------------------------------------------\n -- WRITE procedure bodies\n ----------------------------------------------------------------------------\n\n --\n -- std_ulogic\n -- note: compatible with std_logic\n --\n\n procedure write(l : inout line ;\n value : in std_ulogic ;\n justified: in side := right;\n field : in width := 0 ) is\n begin\n\n --\n -- algorithm:\n -- \n -- just write out the string associated with the enumerated\n -- value.\n -- \n\n case value is\n when 'U' => write( l, character'('U'), justified, field );\n when 'X' => write( l, character'('X'), justified, field );\n when '0' => write( l, character'('0'), justified, field );\n when '1' => write( l, character'('1'), justified, field );\n when 'Z' => write( l, character'('Z'), justified, field );\n when 'W' => write( l, character'('W'), justified, field );\n when 'L' => write( l, character'('L'), justified, field );\n when 'H' => write( l, character'('H'), justified, field );\n when '-' => write( l, character'('-'), justified, field );\n end case;\n end write;\n\n --\n -- std_logic_vector\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure write(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m: line; -- build up intermediate string\n\n begin\n\n --\n -- algorithm:\n -- \n -- for each value in array\n -- add string representing value to intermediate string\n -- write intermediate string to line parameter\n -- free intermediate string\n -- \n\n -- for each value in array\n for i in value'range loop\n\n -- add string representing value to intermediate string\n write( m, value( i ) );\n\n end loop;\n\n -- write intermediate string to line parameter\n write( l, m.all, justified, field );\n\n -- free intermediate string\n deallocate( m );\n\n end write;\n\n\n--------------------------------------------------------------------------------\n\n ----------------------------------------------------------------------------\n -- procedure bodies for octal and hexadecimal read and write\n ----------------------------------------------------------------------------\n\n --\n -- std_logic_vector/octal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem oct_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := octdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n oct_logic_vector := octint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := oct_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := octdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n oct_logic_vector := octint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_oct;\n\n\n procedure read_oct(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_oct;\n\n procedure write_oct(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / oct_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = oct_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2octdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_oct;\n\n --\n -- std_logic_vector/hexadecimal\n -- note: NOT compatible with std_ulogic_vector\n --\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector; \n good : out boolean ) is\n\n variable m : line ; -- safe L\n variable success : boolean := true; -- readable GOOD\n variable logic_value : std_logic ; -- elem value\n variable c : character ; -- char read\n variable charcode : integer ; -- char->int\n variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit\n variable bitpos : integer ; -- in state vec.\n begin\n\n --\n -- algorithm:\n -- \n -- skip over leading blanks, then read a digit\n -- and do a conversion into a logic value\n -- for each element in array\n -- \n\n -- make sure logic array is right size to read this base\n success := ( ( value'length rem hex_bits_per_digit ) = 0 );\n if success then\n\n -- only operate on non-empty strings\n if ( ( l /= null ) and ( l.all'length /= 0 ) ) then\n\n -- save old copy of string in case read fails\n m := new string'( l.all );\n\n -- pick off leading white space and get first significant char\n c := ' ';\n while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop\n read( l, c, success );\n end loop;\n\n -- turn character into integer\n charcode := hexdigit2int( c );\n\n -- not doing any bits yet\n bitpos := 0;\n\n -- check for bad first character\n if charcode = bad_charcode then\n success := false;\n else\n -- loop through each value in array\n hex_logic_vector := hexint2logic( charcode );\n for i in value'range loop\n \n -- doing the next bit\n bitpos := bitpos + 1;\n \n -- stick the value in\n value( i ) := hex_logic_vector( bitpos );\n \n -- read the next character if we're not at array end\n if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then\n read( l, c, success );\n if not success then\n exit;\n end if;\n -- turn character into integer\n charcode := hexdigit2int( c );\n -- check for bad char\n if charcode = bad_charcode then\n success := false;\n exit;\n end if;\n -- reset bit position\n bitpos := 0;\n -- turn character code into state array \n hex_logic_vector := hexint2logic( charcode );\n end if;\n \n end loop; -- each index in return array\n \n end if; -- if bad first character\n\n -- clean up working storage\n if success then\n deallocate( m );\n else\n deallocate( l );\n l := m;\n end if;\n\n -- no characters to read for return array that isn't null slice\n elsif ( value'length /= 0 ) then\n success := false;\n end if; -- non null access, non empty string\n\n end if;\n\n -- set out parameter of success\n good := success;\n\n end read_hex;\n\n\n procedure read_hex(l : inout line ; \n value : out std_logic_vector) is\n variable success: boolean; -- internal good flag\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value.\" \n severity error;\n end read_hex;\n\n procedure write_hex(l : inout line ;\n value : in std_logic_vector ;\n justified: in side := right;\n field : in width := 0 ) is\n\n variable m : line ; -- safe copy of L\n variable goodlength : boolean ; -- array is ok len for this base\n variable isx : boolean ; -- an X in this digit\n variable integer_value: integer ; -- accumulate integer value\n variable c : character; -- character read\n variable charpos : integer ; -- index string being contructed\n variable bitpos : integer ; -- bit index inside digit\n\n begin\n\n --\n -- algorithm:\n -- \n -- make sure this array can be written in this base\n -- create a string to place intermediate results\n -- initialize counters and flags to beginning of string\n -- for each item in array\n -- note unknown, else accumulate logic into integer\n -- if at this digit's last bit\n -- stuff digit just computed into intermediate result\n -- reset flags and counters except for charpos\n -- write intermediate result into line\n -- free work storage\n -- \n\n -- make sure this array can be written in this base\n goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );\n assert goodlength\n report \"IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4.\"\n severity error;\n if goodlength then\n\n -- create a string to place intermediate results\n m := new string(1 to ( value'length / hex_bits_per_digit ) );\n\n -- initialize counters and flags to beginning of string\n charpos := 0;\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n -- for each item in array\n for i in value'range loop\n\n -- note unknown, else accumulate logic into integer\n case value(i) is\n when '0' | 'L' =>\n integer_value := integer_value * 2;\n when '1' | 'H' =>\n integer_value := ( integer_value * 2 ) + 1;\n when others =>\n isx := true;\n end case;\n\n -- see if we've done this digit's last bit\n bitpos := bitpos + 1;\n if bitpos = hex_bits_per_digit then\n\n -- stuff the digit just computed into the intermediate result\n charpos := charpos + 1;\n if isx then\n m.all(charpos) := 'X';\n else\n m.all(charpos) := int2hexdigit( integer_value );\n end if;\n\n -- reset flags and counters except for location in string being constructed\n bitpos := 0;\n isx := false;\n integer_value := 0;\n\n end if;\n\n end loop;\n\n -- write intermediate result into line\n write( l, m.all, justified, field );\n\n -- free work storage\n deallocate( m );\n\n end if;\n\n end write_hex;\n\n------------------------------------------------------------------------------\n\n ------------------------------------\n -- Read octal/hex numbers to integer\n ------------------------------------\n\n --\n -- Read octal to integer\n --\n \n procedure read_oct(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := octdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := octdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 8) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_oct;\n\n -- simple version\n procedure read_oct(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_oct( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_OCT: Unable to read octal integer value.\" \n severity error;\n end read_oct;\n\n\n --\n -- Read hex to integer\n --\n \n procedure read_hex(l : inout line;\n value : out integer;\n good : out boolean) is\n\n variable pos : integer;\n variable digit : integer;\n variable result : integer := 0;\n variable success : boolean := true;\n variable c : character;\n variable old_l : line := l;\n\n begin\n -- algorithm:\n --\n -- skip leading white space, read digit, convert\n -- into integer\n --\n if (l /= NULL) then\n -- set pos to start of actual number by skipping white space\n pos := l'LEFT;\n c := l(pos);\n while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop\n pos := pos + 1;\n c := l(pos);\n end loop;\n \n -- check for start of valid number\n digit := hexdigit2int(l(pos));\n\n if ((digit = bad_charcode) or (digit = x_charcode)) then\n good := FALSE;\n return;\n else\n -- calculate integer value\n for i in pos to l'RIGHT loop\n digit := hexdigit2int(l(pos));\n exit when (digit = bad_charcode) or (digit = x_charcode);\n result := (result * 16) + digit;\n pos := pos + 1;\n end loop;\n value := result;\n -- shrink line\n if (pos > 1) then\n l := new string'(old_l(pos to old_l'HIGH));\n deallocate(old_l);\n end if;\n good := TRUE;\n return;\n end if;\n else\n good := FALSE;\n end if;\n\n end read_hex;\n\n -- simple version\n procedure read_hex(l : inout line;\n value : out integer) is\n\n variable success: boolean; -- internal good flag\n\n begin \n read_hex( l, value, success ); -- use safe version \n assert success \n report \"IO1164.READ_HEX: Unable to read hex integer value.\" \n severity error;\n end read_hex;\n\nend io1164;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity asyncLdCnt is port (\n loadVal: in std_logic_vector(3 downto 0);\n clk, load: in std_logic;\n q: out std_logic_vector(3 downto 0)\n );\nend asyncLdCnt;\n\narchitecture rtl of asyncLdCnt is\n\nsignal qLocal: unsigned(3 downto 0);\n\nbegin\n\n process (clk, load, loadVal) begin\n if (load = '1') then\n qLocal <= to_unsigned(loadVal);\n elsif (clk'event and clk = '1' ) then\n qLocal <= qLocal + 1;\n end if;\n end process;\n\n q <= to_stdlogicvector(qLocal);\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity LoadCnt is port (\n CntEn: in std_logic;\n LdCnt: in std_logic;\n LdData: in std_logic_vector(3 downto 0);\n Clk: in std_logic;\n Rst: in std_logic;\n CntVal: out std_logic_vector(3 downto 0)\n );\nend LoadCnt;\n\narchitecture behavioral of LoadCnt is\n\nsignal Cnt: std_logic_vector(3 downto 0);\n\nbegin\n\n counter: process (Clk, Rst) begin\n if Rst = '1' then\n Cnt <= (others => '0');\n elsif (Clk'event and Clk = '1') then\n if (LdCnt = '1') then\n Cnt <= LdData;\n elsif (CntEn = '1') then\n Cnt <= Cnt + 1;\n else\n Cnt <= Cnt;\n end if;\n end if;\n end process;\n\n CntVal <= Cnt;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nlibrary UTILS;\nuse UTILS.io1164.all;\nuse std.textio.all;\n\nentity loadCntTB is\nend loadCntTB;\n\narchitecture testbench of loadCntTB is\n\n component loadCnt port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\n end component;\n\nfile vectorFile: text is in \"vectorfile\";\ntype vectorType is record\n data: std_logic_vector(7 downto 0);\n load: std_logic;\n rst: std_logic;\n q: std_logic_vector(7 downto 0);\nend record;\n\nsignal testVector: vectorType;\nsignal TestClk: std_logic := '0';\nsignal Qout: std_logic_vector(7 downto 0);\n\nconstant ClkPeriod: time := 100 ns;\n\nfor all: loadCnt use entity work.loadcnt(rtl);\n\nbegin\n\n-- File reading and stimulus application\n readVec: process\n variable VectorLine: line;\n variable VectorValid: boolean;\n variable vRst: std_logic;\n variable vLoad: std_logic;\n variable vData: std_logic_vector(7 downto 0);\n variable vQ: std_logic_vector(7 downto 0);\n \n begin\n while not endfile (vectorFile) loop\n readline(vectorFile, VectorLine);\n\n read(VectorLine, vRst, good => VectorValid);\n next when not VectorValid;\n read(VectorLine, vLoad);\n read(VectorLine, vData);\n read(VectorLine, vQ);\n\n wait for ClkPeriod/4;\n\n testVector.Rst <= vRst;\n testVector.Load <= vLoad;\n testVector.Data <= vData;\n testVector.Q <= vQ;\n\n wait for (ClkPeriod/4) * 3;\n\n end loop;\n\n assert false\n report \"Simulation complete\"\n severity note;\n\n wait;\n\n end process;\n\n-- Free running test clock\n TestClk <= not TestClk after ClkPeriod/2;\n\n-- Instance of design being tested\n u1: loadCnt port map (Data => testVector.Data,\n load => testVector.Load,\n clk => TestClk,\n rst => testVector.Rst,\n q => Qout\n );\n\n-- Process to verify outputs\n verify: process (TestClk)\n variable ErrorMsg: line;\n begin\n if (TestClk'event and TestClk = '0') then\n if Qout /= testVector.Q then\n write(ErrorMsg, string'(\"Vector failed \"));\n write(ErrorMsg, now);\n writeline(output, ErrorMsg);\n end if;\n end if;\n end process;\n \n\nend testbench;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity loadCnt is port (\n data: in std_logic_vector (7 downto 0);\n load: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n q: out std_logic_vector (7 downto 0)\n );\nend loadCnt;\n\narchitecture rtl of loadCnt is\n\nsignal cnt: std_logic_vector (7 downto 0);\n\nbegin\n\n counter: process (clk, rst) begin\n if (rst = '1') then\n cnt <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (load = '1') then\n cnt <= data;\n else\n cnt <= cnt + 1;\n end if;\n end if;\n end process;\n\n q <= cnt;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity multiplier is port (\n a,b : in std_logic_vector (15 downto 0);\n product: out std_logic_vector (31 downto 0)\n );\nend multiplier;\n\narchitecture dataflow of multiplier is\n\nbegin\n\n product <= a * b;\n\nend dataflow;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity mux is port (\n A, B, Sel: in std_logic;\n Y: out std_logic\n );\nend mux;\n\narchitecture simModel of mux is\n\n-- Delay Constants\nconstant tPD_A: time := 10 ns;\nconstant tPD_B: time := 15 ns;\nconstant tPD_Sel: time := 5 ns;\n\nbegin\n\n DelayMux: process (A, B, Sel)\n\n variable localY: std_logic; -- Zero delay place holder for Y\n\n begin\n\n -- Zero delay model\n case Sel is\n when '0' =>\n localY := A;\n when others =>\n localY := B;\n end case;\n\n -- Delay calculation\n if (B'event) then\n Y <= localY after tPD_B;\n elsif (A'event) then\n Y <= localY after tPD_A;\n else\n Y <= localY after tPD_Sel;\n end if;\n\n end process;\n\n\nend simModel;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n begin\n\n if (a + b = \"10011010\") then\n result <= c;\n elsif (a + b = \"01011001\") then\n result <= d;\n elsif (a + b = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture concurrent of TRIBUF8 is\n\nbegin\n\n op <= ip when oe = '1' else (others => 'Z');\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture concurrent of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend concurrent;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF8 is port (\n ip: in std_logic_vector(7 downto 0);\n oe: in std_logic;\n op: out std_logic_vector(7 downto 0)\n );\nend TRIBUF8;\n\narchitecture sequential of TRIBUF8 is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= (others => 'Z');\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in bit;\n oe: in bit;\n op: out bit\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= null;\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture sequential of TRIBUF is\n\nbegin\n\n enable: process (ip,oe) begin\n if (oe = '1') then\n op <= ip;\n else\n op <= 'Z';\n end if;\n end process;\n\nend sequential;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity tribuffer is port (\n input: in std_logic;\n enable: in std_logic;\n output: out std_logic\n );\nend tribuffer;\n\narchitecture structural of tribuffer is\n\nbegin\n\n u1: tribuf port map (ip => input,\n oe => enable,\n op => output\n );\n\nend structural;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nbegin\n\n genXOR(0) <= '0';\n\n parTree: for i in 1 to ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity oddParityLoop is\n generic ( width : integer := 8 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityLoop ; \n\narchitecture scaleable of oddParityLoop is\nbegin\n\n process (ad) \n variable loopXor: std_logic;\n begin\n loopXor := '0';\n\n for i in 0 to width -1 loop\n loopXor := loopXor xor ad( i ) ;\n end loop ;\n\n oddParity <= loopXor ;\n\n end process;\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\n\nentity OR2 is port (\n I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after 10 ns;\n\nend simple;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity adder is port (\n a,b: in std_logic_vector(3 downto 0);\n sum: out std_logic_vector(3 downto 0);\n overflow: out std_logic\n );\nend adder;\n\narchitecture concat of adder is\n\nsignal localSum: std_logic_vector(4 downto 0);\n\nbegin\n\n localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));\n\n sum <= localSum(3 downto 0);\n overflow <= localSum(4);\n\nend concat;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity paramDFF is\n generic (size: integer := 8);\n port (\n data: in std_logic_vector(size - 1 downto 0);\n clock: in std_logic;\n reset: in std_logic;\n ff_enable: in std_logic;\n op_enable: in std_logic;\n qout: out std_logic_vector(size - 1 downto 0)\n );\nend paramDFF;\n\narchitecture parameterize of paramDFF is\n\nsignal reg: std_logic_vector(size - 1 downto 0);\n\nbegin\n\n u1: pDFFE generic map (n => size)\n port map (d => data,\n clk =>clock,\n rst => reset,\n en => ff_enable,\n q => reg\n );\n u2: pTRIBUF generic map (n => size)\n port map (ip => reg,\n oe => op_enable,\n op => qout\n );\n\nend paramterize;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 );\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal genXor: std_logic_vector(ad'range);\n\nsignal one: std_logic := '1';\n\nbegin\n\n parTree: for i in ad'range generate\n g0: if i = 0 generate\n x0: xor2 port map (i1 => one,\n i2 => one,\n y => genXor(0)\n );\n end generate;\n\n g1: if i > 0 and i <= ad'high generate\n x1: xor2 port map (i1 => genXor(i - 1),\n i2 => ad(i - 1),\n y => genXor(i)\n );\n end generate;\n\n end generate;\n\n oddParity <= genXor(ad'high) ;\n\nend scaleable ;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity oddParityGen is\n generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2\n port (ad: in std_logic_vector (width - 1 downto 0);\n oddParity : out std_logic ) ;\nend oddParityGen; \n\narchitecture scaleable of oddParityGen is\n\nsignal stage0: std_logic_vector(31 downto 0);\nsignal stage1: std_logic_vector(15 downto 0);\nsignal stage2: std_logic_vector(7 downto 0);\nsignal stage3: std_logic_vector(3 downto 0);\nsignal stage4: std_logic_vector(1 downto 0);\n\nbegin\n\n g4: for i in stage4'range generate\n g41: if (ad'length > 2) generate\n x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));\n end generate;\n end generate;\n\n g3: for i in stage3'range generate\n g31: if (ad'length > 4) generate\n x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));\n end generate;\n end generate;\n\n g2: for i in stage2'range generate\n g21: if (ad'length > 8) generate\n x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));\n end generate;\n end generate;\n\n g1: for i in stage1'range generate\n g11: if (ad'length > 16) generate\n x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));\n end generate;\n end generate;\n\n\n s1: for i in ad'range generate\n s14: if (ad'length = 2) generate\n stage4(i) <= ad(i);\n end generate;\n\n s13: if (ad'length = 4) generate\n stage3(i) <= ad(i);\n end generate;\n\n s12: if (ad'length = 8) generate\n stage2(i) <= ad(i);\n end generate;\n\n s11: if (ad'length = 16) generate\n stage1(i) <= ad(i);\n end generate;\n\n s10: if (ad'length = 32) generate\n stage0(i) <= ad(i);\n end generate;\n\n end generate;\n\n\n genPar: xor2 port map (stage4(0), stage4(1), oddParity);\n\nend scaleable ;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in unsigned(3 downto 0);\n power : out unsigned(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nsignal inputValInt: integer range 0 to 15;\nsignal powerL: integer range 0 to 65535;\n \nbegin\n\n inputValInt <= to_integer(inputVal);\n power <= to_unsigned(powerL,16);\n\n process begin\n wait until Clk = '1';\n\n powerL <= Pow(inputValInt,4);\n \n end process;\n\nend behavioral;\npackage PowerPkg is \n component Power port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\n end component;\nend PowerPkg;\n\nuse work.bv_math.all;\nuse work.int_math.all;\nuse work.PowerPkg.all;\n\nentity Power is port(\n Clk : in bit; \n inputVal : in bit_vector(0 to 3);\n power : out bit_vector(0 to 15) );\nend Power;\n\n\n\n\narchitecture funky of Power is\n \n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n Variable i : integer := 0;\n begin\n while( i < Exp ) loop\n Result := Result * N;\n i := i + 1;\n end loop;\n return( Result );\n end Pow;\n \n \n function RollVal( CntlVal : integer ) return integer is\n begin\n return( Pow( 2, CntlVal ) + 2 );\n end RollVal;\n \n \nbegin\n process \n begin\n wait until Clk = '1';\n \n power <= i2bv(Rollval(bv2I(inputVal)),16);\n \n end process;\nend funky;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity priority_encoder is port\n (interrupts : in std_logic_vector(7 downto 0);\n priority : in std_logic_vector(2 downto 0);\n result : out std_logic_vector(2 downto 0)\n );\nend priority_encoder;\n\narchitecture behave of priority_encoder is\nbegin\n\n process (interrupts)\n variable selectIn : integer;\n variable LoopCount : integer;\n begin\n\n LoopCount := 1;\n selectIn := to_integer(to_unsigned(priority));\n \n while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop\n\t\t\n if (selectIn = 0) then\n selectIn := 7;\n else\n selectIn := selectIn - 1;\n end if;\n\t\t\t\n LoopCount := LoopCount + 1;\n \n end loop;\n\t\t\n result <= std_logic_vector(to_unsigned(selectIn,3));\n\n end process;\n \nend behave;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage primitive is\n component DFFE port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\n end component;\n\n component DFFE_SR port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\n end component;\n\n component DLATCHH port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\n end component;\n\n component AND2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component OR2 port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\n end component;\n\n component INVERTER port (\n i: in std_logic;\n o: out std_logic\n );\n end component;\n\n component TRIBUF port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\n end component;\n\n component BIDIR port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\n end component;\n\nend package;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE is port (\n d: in std_logic;\n q: out std_logic;\n en: in std_logic;\n clk: in std_logic\n );\nend DFFE;\n\narchitecture rtl of DFFE is\n\nbegin\n\n process begin\n wait until clk = '1';\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFFE_SR is port (\n d: in std_logic;\n en: in std_logic;\n clk: in std_logic;\n rst: in std_logic;\n prst: in std_logic;\n q: out std_logic\n );\nend DFFE_SR;\n\narchitecture rtl of DFFE_SR is\n\nbegin\n\n process (clk, rst, prst) begin\n if (rst = '1') then\n q <= '0';\n elsif (prst = '1') then\n q <= '1';\n elsif (clk'event and clk = '1') then\n if (en = '1') then\n q <= d;\n end if;\n end if;\n end process;\n\nend rtl;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DLATCHH is port (\n d: in std_logic;\n en: in std_logic;\n q: out std_logic\n );\nend DLATCHH;\n\narchitecture rtl of DLATCHH is\n\nbegin\n\n process (en) begin\n if (en = '1') then\n q <= d;\n end if;\n end process;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity AND2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend AND2;\n\narchitecture rtl of AND2 is\n\nbegin\n\n y <= '1' when i1 = '1' and i2 = '1' else '0';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity OR2 is port (\n i1: in std_logic;\n i2: in std_logic;\n y: out std_logic\n );\nend OR2;\n\narchitecture rtl of OR2 is\n\nbegin\n\n y <= '1' when i1 = '1' or i2 = '1' else '0';\n\nend rtl;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity INVERTER is port (\n i: in std_logic;\n o: out std_logic\n );\nend INVERTER;\n\narchitecture rtl of INVERTER is\n\nbegin\n\n o <= not i;\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity TRIBUF is port (\n ip: in std_logic;\n oe: in std_logic;\n op: out std_logic\n );\nend TRIBUF;\n\narchitecture rtl of TRIBUF is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n\nend rtl;\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity BIDIR is port (\n ip: in std_logic;\n oe: in std_logic;\n op_fb: out std_logic;\n op: inout std_logic\n );\nend BIDIR;\n\narchitecture rtl of BIDIR is\n\nbegin\n\n op <= ip when oe = '1' else 'Z';\n op_fb <= op;\n\nend rtl;\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\nsubtype fsmType is std_logic_vector(1 downto 0);\nconstant loadDelayCnt : fsmType := \"00\";\nconstant waitDelayEnd : fsmType := \"10\";\nconstant loadLengthCnt : fsmType := \"11\";\nconstant waitLengthEnd : fsmType := \"01\";\n\nsignal currState, nextState: fsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n\n -- Assign pulse output\n pulse <= currState(0);\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity pulseErr is port\n (a: in std_logic;\n b: out std_logic\n );\nend pulseErr;\n\narchitecture behavior of pulseErr is\n\nsignal c: std_logic;\n\nbegin\n\n pulse: process (a,c) begin\n b <= c XOR a;\n\n c <= a;\n end process;\n\nend behavior;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulse is port (\n clk, reset: in std_logic;\n loadLength,loadDelay: in std_logic;\n data: in std_logic_vector(7 downto 0);\n pulse: out std_logic\n );\nend progPulse;\n\narchitecture rtl of progPulse is\n\nsignal downCnt, downCntData: unsigned(7 downto 0);\nsignal downCntLd, downCntEn: std_logic;\nsignal delayCntVal, pulseCntVal: unsigned(7 downto 0);\nsignal startPulse, endPulse: std_logic;\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n delayreg: process (clk, reset) begin\n if reset = '1' then\n delayCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n delayCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n lengthReg: process (clk, reset) begin\n if reset = '1' then\n pulseCntVal <= \"11111111\";\n elsif clk'event and clk = '1' then\n if loadDelay = '1' then\n pulseCntVal <= to_unsigned(data);\n end if;\n end if;\n end process;\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCnt = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, pulseCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downCntData <= pulseCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downCntData <= pulseCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\n downCntr: process (clk,reset) begin\n if (reset = '1') then\n downCnt <= \"00000000\";\n elsif (clk'event and clk = '1') then\n if (downCntLd = '1') then\n downCnt <= downCntData;\n elsif (downCntEn = '1') then\n downCnt <= downCnt - 1;\n else\n downCnt <= downCnt;\n end if;\n end if;\n end process;\n \n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\ntype stateVec is array (3 downto 0) of std_logic;\ntype stateBits is array (progPulseFsmType) of stateVec;\n\nsignal loadVal: std_logic;\n\nconstant stateTable: stateBits := (\n loadDelayCnt => \"0010\",\n waitDelayEnd => \"0100\",\n loadLengthCnt => \"0011\",\n waitLengthEnd => \"1101\" );\n-- ^^^^\n-- ||||__ loadVal \n-- |||___ downCntLd\n-- ||____ downCntEn\n-- |_____ pulse\n\nsignal currState, nextState: progPulseFsmType;\n\nbegin\n\n nextStProc: process (currState, downCnt, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (to_unsigned(downCnt) = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n pulse <= stateTable(currState)(3);\n downCntEn <= stateTable(currState)(2);\n downCntLd <= stateTable(currState)(1);\n loadVal <= stateTable(currState)(0);\n \n downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;\n\nend fsm;\n-- Incorporates Errata 6.1\n\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.numeric_std.all;\n\nentity progPulseFsm is port (\n downCnt: in std_logic_vector(7 downto 0);\n delayCntVal: in std_logic_vector(7 downto 0);\n lengthCntVal: in std_logic_vector(7 downto 0);\n loadLength: in std_logic;\n loadDelay: in std_logic;\n clk: in std_logic;\n reset: in std_logic;\n\n downCntEn: out std_logic;\n downCntLd: out std_logic;\n downtCntData: out std_logic_vector(7 downto 0);\n\n pulse: out std_logic\n );\nend progPulseFsm;\n\narchitecture fsm of progPulseFsm is\n\ntype progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);\nsignal currState, nextState: progPulseFsmType;\nsignal downCntL: unsigned (7 downto 0);\n\nbegin\n\n downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned\n\n nextStProc: process (currState, downCntL, loadDelay, loadLength) begin\n case currState is\n when loadDelayCnt =>\n nextState <= waitDelayEnd;\n\n when waitDelayEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadLengthCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when loadLengthCnt =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n else\n nextState <= waitLengthEnd;\n end if;\n\n when waitLengthEnd =>\n if (loadDelay = '1' or loadLength = '1') then\n nextState <= loadDelayCnt;\n elsif (downCntL = 0) then\n nextState <= loadDelayCnt;\n else\n nextState <= waitDelayEnd;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nextStProc;\n\n currStProc: process (clk, reset) begin\n if (reset = '1') then\n currState <= loadDelayCnt;\n elsif (clk'event and clk = '1') then\n currState <= nextState;\n end if;\n end process currStProc;\n\n outConProc: process (currState, delayCntVal, lengthCntVal) begin\n case currState is\n when loadDelayCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when waitDelayEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n when loadLengthCnt =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when waitLengthEnd =>\n downCntEn <= '1';\n downCntLd <= '0';\n downtCntData <= lengthCntVal;\n pulse <= '1';\n\n when others =>\n downCntEn <= '0';\n downCntLd <= '1';\n downtCntData <= delayCntVal;\n pulse <= '0';\n\n end case;\n end process outConProc;\n\nend fsm;\n-- Incorporates errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nuse work.specialFunctions.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\n-- Incorporate errata 5.4\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.numeric_std.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_arith.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity powerOfFour is port(\n clk : in std_logic; \n inputVal : in std_logic_vector(3 downto 0);\n power : out std_logic_vector(15 downto 0)\n );\nend powerOfFour;\n\narchitecture behavioral of powerOfFour is\n\n function Pow( N, Exp : integer ) return integer is\n Variable Result : integer := 1;\n\n begin\n for i in 1 to Exp loop\n Result := Result * N;\n end loop;\n return( Result );\n end Pow;\n\nbegin\n\n process begin\n wait until Clk = '1';\n\n power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);\n \n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity regFile is port (\n clk, rst: in std_logic;\n data: in std_logic_vector(31 downto 0);\n regSel: in std_logic_vector(1 downto 0);\n wrEnable: in std_logic;\n regOut: out std_logic_vector(31 downto 0)\n );\nend regFile;\n\narchitecture behavioral of regFile is\n\nsubtype reg is std_logic_vector(31 downto 0);\ntype regArray is array (integer range <>) of reg;\n\nsignal registerFile: regArray(0 to 3);\n\nbegin\n\n regProc: process (clk, rst) \n variable i: integer;\n\n begin\n i := 0;\n\n if rst = '1' then\n while i <= registerFile'high loop\n registerFile(i) <= (others => '0');\n i := i + 1;\n end loop;\n\n elsif clk'event and clk = '1' then\n if (wrEnable = '1') then\n case regSel is\n when \"00\" =>\n registerFile(0) <= data;\n when \"01\" =>\n registerFile(1) <= data;\n when \"10\" =>\n registerFile(2) <= data;\n when \"11\" =>\n registerFile(3) <= data;\n when others =>\n null;\n end case;\n end if;\n end if;\n end process;\n\n outputs: process(regSel, registerFile) begin\n case regSel is\n when \"00\" =>\n regOut <= registerFile(0);\n when \"01\" =>\n regOut <= registerFile(1);\n when \"10\" =>\n regOut <= registerFile(2);\n when \"11\" =>\n regOut <= registerFile(3);\n when others =>\n null;\n end case;\n end process;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity DFF is port (\n d1,d2: in std_logic;\n q1,q2: out std_logic;\n clk: in std_logic;\n rst : in std_logic\n );\nend DFF;\n\narchitecture rtl of DFF is\n\nbegin\n\n resetLatch: process (clk, rst) begin\n if rst = '1' then\n q1 <= '0';\n elsif clk'event and clk = '1' then\n q1 <= d1;\n q2 <= d2;\n end if;\n end process;\n\nend rtl;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity resFcnDemo is port (\n a, b: in std_logic;\n oeA,oeB: in std_logic;\n result: out std_logic\n );\nend resFcnDemo;\n\narchitecture multiDriver of resFcnDemo is\n\nbegin\n\n result <= a when oeA = '1' else 'Z';\n result <= b when oeB = '1' else 'Z';\n\nend multiDriver;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleDFF is port (\n data: in std_logic_vector(7 downto 0);\n clock: in std_logic;\n enable: in std_logic;\n qout: out std_logic_vector(7 downto 0)\n );\nend scaleDFF;\n\narchitecture scalable of scaleDFF is\n\nbegin\n\n u1: sDFFE port map (d => data,\n clk =>clock,\n en => enable,\n q => qout\n );\n\nend scalable;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\nuse ieee.std_logic_unsigned.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nsignal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;\nsignal oe: std_logic;\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n la_n <= '1'; lb_n <= '1';\n lc_n <= '1'; ld_n <= '1';\n le_n <= '1'; lf_n <= '1';\n lg_n <= '1';\n\n case bcdInputs is\n when \"0000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n\n when \"0001\" => lb_n <= '0'; lc_n <= '0';\n\n when \"0010\" => la_n <= '0'; lb_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lg_n <= '0';\n\n when \"0011\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lg_n <= '0';\n\n when \"0100\" => lb_n <= '0'; lc_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0101\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"0110\" => la_n <= '0'; lc_n <= '0';\n ld_n <= '0'; le_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n when \"0111\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0';\n\n when \"1000\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n le_n <= '0'; lf_n <= '0';\n lg_n <= '0';\n\n when \"1001\" => la_n <= '0'; lb_n <= '0';\n lc_n <= '0'; ld_n <= '0';\n lf_n <= '0'; lg_n <= '0';\n\n-- All other inputs possibilities are \"don't care\"\n\n when others => la_n <= 'X'; lb_n <= 'X';\n lc_n <= 'X'; ld_n <= 'X';\n le_n <= 'X'; lf_n <= 'X';\n lg_n <= 'X';\n\n end case;\n\n end process bcd2sevSeg;\n\n -- Disable outputs for all invalid input values\n\n oe <= '1' when (bcdInputs < 10) else '0';\n\n a_n <= la_n when oe = '1' else 'Z';\n b_n <= lb_n when oe = '1' else 'Z';\n c_n <= lc_n when oe = '1' else 'Z';\n d_n <= ld_n when oe = '1' else 'Z';\n e_n <= le_n when oe = '1' else 'Z';\n f_n <= lf_n when oe = '1' else 'Z';\n g_n <= lg_n when oe = '1' else 'Z';\n\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nuse std.textio.all;\n\nentity sevenSegmentTB is\nend sevenSegmentTB;\n\narchitecture testbench of sevenSegmentTB is\n\ncomponent sevenSegment port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend component;\n\ntype vector is record\n bcdStimulus: std_logic_vector(3 downto 0);\n sevSegOut: std_logic_vector(6 downto 0);\nend record;\n\nconstant NumVectors: integer:= 17;\nconstant PropDelay: time := 40 ns;\nconstant SimLoopDelay: time := 10 ns;\n\ntype vectorArray is array (0 to NumVectors - 1) of vector;\nconstant vectorTable: vectorArray := (\n (bcdStimulus => \"0000\", sevSegOut => \"0000001\"),\n (bcdStimulus => \"0001\", sevSegOut => \"1001111\"),\n (bcdStimulus => \"0010\", sevSegOut => \"0010010\"),\n (bcdStimulus => \"0011\", sevSegOut => \"0000110\"),\n (bcdStimulus => \"0100\", sevSegOut => \"1001100\"),\n (bcdStimulus => \"0101\", sevSegOut => \"0100100\"),\n (bcdStimulus => \"0110\", sevSegOut => \"0100000\"),\n (bcdStimulus => \"0111\", sevSegOut => \"0001111\"),\n (bcdStimulus => \"1000\", sevSegOut => \"0000000\"),\n (bcdStimulus => \"1001\", sevSegOut => \"0000100\"),\n (bcdStimulus => \"1010\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1011\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1100\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1101\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1110\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"1111\", sevSegOut => \"ZZZZZZZ\"),\n (bcdStimulus => \"0000\", sevSegOut => \"0110110\") -- this vector fails\n );\n\nfor all : sevenSegment use entity work.sevenSegment(behavioral);\n\nsignal StimInputs: std_logic_vector(3 downto 0);\nsignal CaptureOutputs: std_logic_vector(6 downto 0);\n\nbegin\n\n u1: sevenSegment port map (bcdInputs => StimInputs,\n a_n => CaptureOutputs(6),\n b_n => CaptureOutputs(5),\n c_n => CaptureOutputs(4),\n d_n => CaptureOutputs(3),\n e_n => CaptureOutputs(2),\n f_n => CaptureOutputs(1),\n g_n => CaptureOutputs(0));\n\n LoopStim: process\n variable FoundError: boolean := false;\n variable TempVector: vector;\n variable ErrorMsgLine: line;\n begin\n\n for i in vectorTable'range loop\n TempVector := vectorTable(i);\n\n StimInputs <= TempVector.bcdStimulus;\n\n wait for PropDelay;\n\n if CaptureOutputs /= TempVector.sevSegOut then\n write (ErrorMsgLine, string'(\"Vector failed at \"));\n write (ErrorMsgLine, now);\n writeline (output, ErrorMsgLine);\n FoundError := true;\n end if;\n\n wait for SimLoopDelay;\n\n end loop;\n\n assert FoundError\n report \"No errors. All vectors passed.\"\n severity note;\n\n wait;\n\n end process;\n\nend testbench;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity sevenSegment is port (\n bcdInputs: in std_logic_vector (3 downto 0);\n a_n, b_n, c_n, d_n,\n e_n, f_n, g_n: out std_logic\n );\nend sevenSegment;\n\narchitecture behavioral of sevenSegment is\n\nbegin\n\n bcd2sevSeg: process (bcdInputs) begin\n\n -- Assign default to \"off\"\n a_n <= '1'; b_n <= '1';\n c_n <= '1'; d_n <= '1';\n e_n <= '1'; f_n <= '1';\n g_n <= '1';\n\n case bcdInputs is\n when \"0000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n\n when \"0001\" =>\n b_n <= '0'; c_n <= '0';\n\n when \"0010\" =>\n a_n <= '0'; b_n <= '0';\n d_n <= '0'; e_n <= '0';\n g_n <= '0';\n\n when \"0011\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n g_n <= '0';\n\n when \"0100\" =>\n b_n <= '0'; c_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0101\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"0110\" =>\n a_n <= '0'; c_n <= '0';\n d_n <= '0'; e_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when \"0111\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0';\n\n when \"1000\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n e_n <= '0'; f_n <= '0';\n g_n <= '0';\n\n when \"1001\" =>\n a_n <= '0'; b_n <= '0';\n c_n <= '0'; d_n <= '0';\n f_n <= '0'; g_n <= '0';\n\n when others =>\n null;\n\n end case;\n\n end process bcd2sevSeg;\n\nend behavioral;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\nuse IEEE.std_logic_unsigned.all;\n\nentity ForceShare is port (\n a,b,c,d,e,f: in std_logic_vector (7 downto 0);\n result: out std_logic_vector(7 downto 0)\n );\nend ForceShare;\n\narchitecture behaviour of ForceShare is\n\nbegin\n\n sum: process (a,c,b,d,e,f)\n variable tempSum: std_logic_vector(7 downto 0);\n begin\n\n tempSum := a + b; -- temporary node for sum\n\n if (tempSum = \"10011010\") then\n result <= c;\n elsif (tempSum = \"01011001\") then\n result <= d;\n elsif (tempSum = \"10111011\") then\n result <= e;\n else\n result <= f;\n end if;\n end process;\n\nend behaviour;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity shifter is port (\n clk, rst: in std_logic;\n shiftEn,shiftIn: std_logic;\n q: out std_logic_vector (15 downto 0)\n );\nend shifter;\n\n\narchitecture behav of shifter is\n\nsignal qLocal: std_logic_vector(15 downto 0);\n\nbegin\n\n shift: process (clk, rst) begin\n if (rst = '1') then\n qLocal <= (others => '0');\n elsif (clk'event and clk = '1') then\n if (shiftEn = '1') then\n qLocal <= qLocal(14 downto 0) & shiftIn;\n else\n qLocal <= qLocal;\n end if;\n end if;\n\n q <= qLocal;\n end process;\n\nend behav;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity lastAssignment is port\n (a, b: in std_logic;\n selA, selb: in std_logic;\n result: out std_logic\n );\nend lastAssignment;\n\narchitecture behavioral of lastAssignment is\n\nbegin\n\n demo: process (a,b,selA,selB) begin\n if (selA = '1') then\n result <= a;\n else\n result <= '0';\n end if;\n\n if (selB = '1') then\n result <= b;\n else\n result <= '0';\n end if;\n end process demo;\n\nend behavioral;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '0' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity signalDemo is port (\n a: in std_logic;\n b: out std_logic\n );\nend signalDemo;\n\narchitecture basic of signalDemo is\n\nsignal c: std_logic;\n\nbegin\n\n demo: process (a) begin\n\n c <= a;\n\n if c = '1' then\n b <= a;\n else\n b <= '0';\n end if;\n\n end process;\n\nend basic;\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\npackage simPrimitives is\n\n component OR2\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\n end component;\n\n component SimDFF\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\n end component;\n\n\nend simPrimitives;\n\n\nlibrary IEEE;\nUSE IEEE.std_logic_1164.all;\n\nentity OR2 is\n generic (tPD: time := 1 ns);\n\n port (I1, I2: in std_logic;\n Y: out std_logic\n );\nend OR2;\n\narchitecture simple of OR2 is\n\nbegin\n\n Y <= I1 OR I2 after tPD;\n\nend simple;\n\n\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SimDFF is\n generic(tCQ: time := 1 ns;\n tS : time := 1 ns;\n tH : time := 1 ns\n );\n port (D, Clk: in std_logic;\n Q: out std_logic\n );\nend SimDff;\n\narchitecture SimModel of SimDFF is\n\nbegin\n\n reg: process (Clk, D) begin\n\n -- Assign output tCQ after rising clock edge\n if (Clk'event and Clk = '1') then\n Q <= D after tCQ;\n end if;\n\n -- Check setup time\n if (Clk'event and Clk = '1') then\n assert (D'last_event >= tS)\n report \"Setup time violation\"\n severity Warning;\n end if;\n\n -- Check hold time\n if (D'event and Clk'stable and Clk = '1') then\n assert (D'last_event - Clk'last_event > tH)\n report \"Hold Time Violation\"\n severity Warning;\n end if;\n\n end process;\n\nend simModel;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until rising_edge(clk);\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity SRFF is port (\n s,r: in std_logic;\n clk: in std_logic;\n q: out std_logic\n );\nend SRFF;\n\narchitecture rtl of SRFF is\n\nbegin\n\n process begin\n wait until clk = '1';\n if s = '0' and r = '1' then\n\tq <= '0';\n elsif s = '1' and r = '0' then\n\tq <= '1';\n end if;\n end process;\n\nend rtl;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\npackage scaleable is\n component scaleUpCnt port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: in std_logic_vector\n );\n end component;\nend scaleable;\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nuse work.primitive.all;\n\nentity scaleUpCnt is port (\n clk: in std_logic;\n reset: in std_logic;\n cnt: out std_logic_vector\n );\nend scaleUpCnt;\n\narchitecture scaleable of scaleUpCnt is\n\nsignal one: std_logic := '1';\nsignal cntL: std_logic_vector(cnt'range);\nsignal andTerm: std_logic_vector(cnt'range);\n\nbegin\n\n-- Special case is the least significant bit\n\n lsb: tff port map (t => one,\n reset => reset,\n clk => clk,\n q => cntL(cntL'low)\n );\n\n andTerm(0) <= cntL(cntL'low);\n\n\n-- General case for all other bits\n\n genAnd: for i in 1 to cntL'high generate\n andTerm(i) <= andTerm(i - 1) and cntL(i);\n end generate;\n\n genTFF: for i in 1 to cntL'high generate\n t1: tff port map (t => andTerm(i),\n clk => clk,\n reset => reset,\n q => cntl(i)\n );\n end generate;\n\n cnt <= CntL;\n\nend scaleable;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \t\ttargetFsmType := \"010\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(3 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"0000\";\nconstant B_Busy: \ttargetFsmType := \"0001\";\nconstant Backoff: \ttargetFsmType := \"0011\";\nconstant S_Data: \ttargetFsmType := \"1100\";\nconstant Turn_Ar: \ttargetFsmType := \"1101\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \t\ttargetFsmType := \"101\";\nconstant Backoff: \ttargetFsmType := \"010\";\nconstant S_Data: \t\ttargetFsmType := \"011\";\nconstant Turn_Ar: \ttargetFsmType := \"110\";\nconstant Dont_Care: targetFsmType := \"XXX\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= Dont_Care;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\ntype targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n-- Process to generate next state logic\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n null;\n\n end case;\n\n end process nxtStProc;\n\n\n-- Process to register the current state\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n-- Process to generate outputs\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n-- Assign output ports\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\n-- Incorporates Errata 10.1 and 10.2\n\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(4 downto 0);\n\nconstant Idle: integer := 0;\nconstant B_Busy: integer := 1;\nconstant Backoff: integer := 2;\nconstant S_Data: integer := 3;\nconstant Turn_Ar: integer := 4;\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n\n nextState <= (others => '0');\n\n if currState(Idle) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n if currState(B_Busy) = '1' then\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState(Idle) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState(S_Data) <= '1';\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState(Backoff) <= '1';\n else\n nextState(B_Busy) <= '1';\n end if;\n end if;\n\n if currState(S_Data) = '1' then\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState(Backoff) <= '1';\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState(Turn_Ar) <= '1';\n else\n nextState(S_Data) <= '1';\n end if;\n end if;\n\n\n if currState(Backoff) = '1' then\n if PCI_Frame_n = '1' then\n nextState(Turn_Ar) <= '1';\n else\n nextState(Backoff) <= '1';\n end if;\n end if;\n\n if currState(Turn_Ar) = '1' then\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState(B_Busy) <= '1';\n else\n nextState(Idle) <= '1';\n end if;\n end if;\n\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n\tcurrState <= (others => '0'); -- per Errata 10.2\n currState(Idle) <= '1';\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n OE_Trdy_n <= '0';\tOE_Stop_n <= '0';\tOE_Devsel_n <= '0';\t-- defaults per errata 10.1\n OE_AD <= '0';\t\tLPCI_Trdy_n <= '1';\tLPCI_Stop_n <= '1';\n\t LPCI_Devsel_n <= '1';\n\n if (currState(S_Data) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n\n if (currState(Backoff) = '1') then\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n end if;\n\n\n if (currState(Turn_Ar) = '1') then\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n end if;\n\n if (currState(Idle) = '1' or currState(B_Busy) = '1') then\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n end if;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic;\t-- PCI Frame#\n PCI_Irdy_n: in std_logic;\t\t-- PCI Irdy#\n Hit: in std_logic;\t\t\t-- Hit on address decode\n D_Done: in std_logic;\t\t\t-- Device decode complete\n Term: in std_logic;\t\t\t-- Terminate transaction\n Ready: in std_logic;\t\t\t-- Ready to transfer data\n Cmd_Write: in std_logic;\t\t-- Command is Write\n Cmd_Read: in std_logic;\t\t-- Command is Read\n T_Abort: in std_logic;\t\t-- Target error - abort transaction\n PCI_Clk: in std_logic;\t\t-- PCI Clock\n PCI_Reset_n: in std_logic;\t-- PCI Reset#\n\n PCI_Devsel_n: out std_logic;\t-- PCI Devsel#\n PCI_Trdy_n: out std_logic;\t-- PCI Trdy#\n PCI_Stop_n: out std_logic;\t-- PCI Stop#\n OE_AD: out std_logic;\t\t\t-- PCI AD bus enable\n OE_Trdy_n: out std_logic;\t\t-- PCI Trdy# enable\n OE_Stop_n: out std_logic;\t\t-- PCI Stop# enable\n OE_Devsel_n: out std_logic\t-- PCI Devsel# enable\n\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\nsignal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\nsubtype targetFsmType is std_logic_vector(2 downto 0);\n\nconstant Idle: \t\ttargetFsmType := \"000\";\nconstant B_Busy: \ttargetFsmType := \"001\";\nconstant Backoff: \ttargetFsmType := \"011\";\nconstant S_Data: \ttargetFsmType := \"110\";\nconstant Turn_Ar: \ttargetFsmType := \"100\";\n\nsignal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n\t\t\t LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when IDLE =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when B_BUSY =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= IDLE;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= BACKOFF;\n else\n nextState <= B_BUSY;\n end if;\n\n when S_DATA =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= BACKOFF;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= TURN_AR;\n else\n nextState <= S_DATA;\n end if;\n\n\n when BACKOFF =>\n if PCI_Frame_n = '1' then\n nextState <= TURN_AR;\n else\n nextState <= BACKOFF;\n end if;\n\n when TURN_AR =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_BUSY;\n else\n nextState <= IDLE;\n end if;\n\n when others =>\n\t nextState <= IDLE;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n\n -- Set default output assignments\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n\t\t OE_AD <= '1';\n\t else\n\t\t OE_AD <= '0';\n\t\tend if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n\t when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n\t\tOE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary IEEE;\nuse IEEE.std_logic_1164.all;\n\nentity pci_target is port (\n PCI_Frame_n: in std_logic; -- PCI Frame#\n PCI_Irdy_n: in std_logic; -- PCI Irdy#\n Hit: in std_logic; -- Hit on address decode\n D_Done: in std_logic; -- Device decode complete\n Term: in std_logic; -- Terminate transaction\n Ready: in std_logic; -- Ready to transfer data\n Cmd_Write: in std_logic; -- Command is Write\n Cmd_Read: in std_logic; -- Command is Read\n T_Abort: in std_logic; -- Target error - abort transaction\n PCI_Clk: in std_logic; -- PCI Clock\n PCI_Reset_n: in std_logic; -- PCI Reset#\n\n PCI_Devsel_n: out std_logic; -- PCI Devsel#\n PCI_Trdy_n: out std_logic; -- PCI Trdy#\n PCI_Stop_n: out std_logic; -- PCI Stop#\n OE_AD: out std_logic; -- PCI AD bus enable\n OE_Trdy_n: out std_logic; -- PCI Trdy# enable\n OE_Stop_n: out std_logic; -- PCI Stop# enable\n OE_Devsel_n: out std_logic -- PCI Devsel# enable\n );\nend pci_target;\n\narchitecture fsm of pci_target is\n\n signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;\n\n subtype targetFsmType is std_logic_vector(2 downto 0);\n\n constant Idle: targetFsmType := \"000\";\n constant B_Busy: targetFsmType := \"001\";\n constant Backoff: targetFsmType := \"011\";\n constant S_Data: targetFsmType := \"110\";\n constant Turn_Ar: targetFsmType := \"100\";\n\n signal currState, nextState: targetFsmType;\n\nbegin\n\n nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,\n LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin\n case currState is\n when Idle =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when B_Busy =>\n if (PCI_Frame_n ='1' and D_Done = '1') or\n\t (PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then\n nextState <= Idle;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '0' or (Term = '1' and Ready = '1') ) then\n nextState <= S_Data;\n elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and\n\t\t (Term = '1' and Ready = '0') then\n nextState <= Backoff;\n else\n nextState <= B_Busy;\n end if;\n\n when S_Data =>\n if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and\n (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then\n nextState <= Backoff;\n elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then\n nextState <= Turn_Ar;\n else\n nextState <= S_Data;\n end if;\n\n\n when Backoff =>\n if PCI_Frame_n = '1' then\n nextState <= Turn_Ar;\n else\n nextState <= Backoff;\n end if;\n\n when Turn_Ar =>\n if (PCI_Frame_n = '0' and Hit = '0') then\n nextState <= B_Busy;\n else\n nextState <= Idle;\n end if;\n\n when others =>\n\t null;\n end case;\n end process nxtStProc;\n\n\n curStProc: process (PCI_Clk, PCI_Reset_n) begin\n if (PCI_Reset_n = '0') then\n currState <= Idle;\n elsif (PCI_Clk'event and PCI_Clk = '1') then\n currState <= nextState;\n end if;\n end process curStProc;\n\n\n outConProc: process (currState, Ready, T_Abort, Cmd_Write,\n Cmd_Read, T_Abort, Term) begin\n case currState is\n when S_Data =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then\n LPCI_Trdy_n <= '0';\n else\n LPCI_Trdy_n <= '1';\n end if;\n\n if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then\n LPCI_Stop_n <= '0';\n else\n LPCI_Stop_n <= '1';\n end if;\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when Backoff =>\n if (Cmd_Read = '1') then \n OE_AD <= '1';\n else\n OE_AD <= '0';\n end if;\n\n LPCI_Stop_n <= '0';\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n if (T_Abort = '0') then\n LPCI_Devsel_n <= '0';\n else\n LPCI_Devsel_n <= '1';\n end if;\n\n when Turn_Ar =>\n\n OE_Trdy_n <= '1';\n OE_Stop_n <= '1';\n OE_Devsel_n <= '1';\n\n when others =>\n\n OE_Trdy_n <= '0';\n OE_Stop_n <= '0';\n OE_Devsel_n <= '0';\n OE_AD <= '0';\n LPCI_Trdy_n <= '1';\n LPCI_Stop_n <= '1';\n LPCI_Devsel_n <= '1';\n\n end case;\n\n end process outConProc;\n\n PCI_Devsel_n <= LPCI_Devsel_n;\n PCI_Trdy_n <= LPCI_Trdy_n;\n PCI_Stop_n <= LPCI_Stop_n;\n\nend fsm;\nlibrary ieee;\nuse ieee.std_logic_1164.all;\n\nentity test is port (\n a: in std_logic;\n z: out std_logic;\n en: in std_logic\n );\nend test;\n\narchitecture simple of test is\n\nbegin\n\n z <= a when en = '1' else 'z';\n\nend simple;\n"}}}],"truncated":false,"partial":false},"paginationData":{"pageIndex":942,"numItemsPerPage":100,"numTotalItems":100932,"offset":94200,"length":100}},"jwt":"eyJhbGciOiJFZERTQSJ9.eyJyZWFkIjp0cnVlLCJwZXJtaXNzaW9ucyI6eyJyZXBvLmNvbnRlbnQucmVhZCI6dHJ1ZX0sImlhdCI6MTc1MTM1NDk0MSwic3ViIjoiL2RhdGFzZXRzL3J0bC1sbG0vdmhkbF9naXRodWIiLCJleHAiOjE3NTEzNTg1NDEsImlzcyI6Imh0dHBzOi8vaHVnZ2luZ2ZhY2UuY28ifQ.GP0wh0VuAg1s0GGg9ylEJXETU0a9TmsrEUu_0-tdmq0TNI4xAZ-310OYl_nUtNYmvVs0bFrEXZOMVenIsf1-DQ","displayUrls":true},"discussionsStats":{"closed":0,"open":1,"total":1},"fullWidth":true,"hasGatedAccess":true,"hasFullAccess":true,"isEmbedded":false,"savedQueries":{"community":[],"user":[]}}">
content
stringlengths 1
1.04M
⌀ |
|---|
-- Copyright (C) 2001 Bill Billowitch.
-- Some of the work to develop this test suite was done with Air Force
-- support. The Air Force and Bill Billowitch assume no
-- responsibilities for this software.
-- This file is part of VESTs (Vhdl tESTs).
-- VESTs is free software; you can redistribute it and/or modify it
-- under the terms of the GNU General Public License as published by the
-- Free Software Foundation; either version 2 of the License, or (at
-- your option) any later version.
-- VESTs is distributed in the hope that it will be useful, but WITHOUT
-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-- for more details.
-- You should have received a copy of the GNU General Public License
-- along with VESTs; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- ---------------------------------------------------------------------
--
-- $Id: tc1798.vhd,v 1.2 2001-10-26 16:29:43 paw Exp $
-- $Revision: 1.2 $
--
-- ---------------------------------------------------------------------
ENTITY c07s01b00x00p02n01i01798ent IS
END c07s01b00x00p02n01i01798ent;
ARCHITECTURE c07s01b00x00p02n01i01798arch OF c07s01b00x00p02n01i01798ent IS
BEGIN
TESTING: PROCESS
variable x : integer := 3;
variable y : integer := 5;
variable z : integer := 9;
BEGIN
if -x + z < y + x and x * z > y - x then -- No_failure_here
x := x - z;
end if;
assert NOT(x=-6)
report "***PASSED TEST: c07s01b00x00p02n01i01798"
severity NOTE;
assert (x=-6)
report "***FAILED TEST: c07s01b00x00p02n01i01798 - The expression is a valid expression according to the rules of the syntactic diagram."
severity ERROR;
wait;
END PROCESS TESTING;
END c07s01b00x00p02n01i01798arch;
|
----------------------------------------------------------------------------------
-- Engineer: Mike Field <[email protected]>
--
-- Description: Generate I2S audio stream and master clock for the PMODI2S.
-- The chip is a Cirrus Logic CS4344 DAC
--
-- Drive with a 100MHz clock for 48,828 samples per second
--
-- 'accepted' will strobe when 'data_l' and 'data_r' are latched
--
-- 'data_l' and 'data_r' are assumed to be signed values.
----------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
entity i2s_output is
Port ( clk : in STD_LOGIC;
data_l : in STD_LOGIC_VECTOR (15 downto 0);
data_r : in STD_LOGIC_VECTOR (15 downto 0);
accepted : out STD_LOGIC;
i2s_sd : out STD_LOGIC;
i2s_lrclk : out STD_LOGIC;
i2s_sclk : out STD_LOGIC;
i2s_mclk : out STD_LOGIC);
end i2s_output;
architecture Behavioral of i2s_output is
signal advance : std_logic := '0';
signal divider : unsigned( 4 downto 0) := (others => '0');
signal step : unsigned( 5 downto 0) := (others => '0');
signal shift_out : std_logic_vector(16 downto 0) := (others => '0');
signal hold_r : std_logic_vector(15 downto 0) := (others => '0');
begin
i2s_lrclk <= std_logic(step(5));
i2s_mclk <= std_logic(divider(1));
i2s_sclk <= std_logic(step(0));
i2s_sd <= shift_out(shift_out'high);
process(clk)
begin
if rising_edge(clk) then
accepted <= '0';
if advance = '1' then
if step(0) = '1' then
shift_out <= shift_out(shift_out'high-1 downto 0) & '1';
if step(5 downto 1) = "01111" then
shift_out(15 downto 0) <= hold_r;
elsif step(5 downto 1) = "11111" then
shift_out(15 downto 0) <= data_l xor x"8000";
hold_r <= data_r xor x"8000";
accepted <= '1';
end if;
end if;
step <= step + 1;
end if;
if divider = 0 then
advance <= '1';
else
advance <= '0';
end if;
divider <= divider + 1;
end if;
end process;
end Behavioral;
|
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
entity RD_Mux is
Port ( RfDest : in STD_LOGIC;
RD : in STD_LOGIC_VECTOR (5 downto 0);
nRD : out STD_LOGIC_VECTOR (5 downto 0));
end RD_Mux;
architecture Behavioral of RD_Mux is
begin
process(RfDest, RD)
begin
if (RfDest = '1') then
nRD <= "001111";
else
nRD <= RD;
end if;
end process;
end Behavioral; |
`protect begin_protected
`protect version = 1
`protect encrypt_agent = "XILINX"
`protect encrypt_agent_info = "Xilinx Encryption Tool 2014"
`protect key_keyowner = "Cadence Design Systems.", key_keyname= "cds_rsa_key", key_method = "rsa"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 64)
`protect key_block
V1qQ/dO68m3x2EnMAwJABWD40Yxb848s2Qek5JN6KRC/8MOasBnl0mKJFELD1NDie9fgcLxKhTAj
JB47bHQVCQ==
`protect key_keyowner = "Mentor Graphics Corporation", key_keyname= "MGC-VERIF-SIM-RSA-1", key_method = "rsa"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 128)
`protect key_block
ZBudBrfNpokdq5xFNGqXytmiQloUs6dF+EdzNphIulqp+iN9Dh2Olb6+/Zz5NnOh+T+yFlI+3EKq
fJNCNB3gIRZkLI3sKG4B5YfI78fTh/PEBcP985aHFMXYTTC08kh+2Il6DiHxObU+lX8F7Dso5+Wa
gNxPwIFhAxn+H2OZ5I8=
`protect key_keyowner = "Xilinx", key_keyname= "xilinx_2014_03", key_method = "rsa"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 256)
`protect key_block
GmbFyNHdf8DhwMpH7fWVVMB6RX5cf+kYqOpoXXlze1gf4WXTwlC/GRC+Qh8WWDRIG4twF7BPe80d
aAFD14dWPQrUvvPpMbp186WMiP2l0IT0ANnP5WeywAF73KHunQ7JY0Ny2iFCT37tj88rpxj4CWwZ
artlcK/B7NAm0d3Y7Au2seDBqk3pKXqTVbt1rq9yBtZBvUvYI+lUOriuf/3avIAo5wQagQ26F5Cu
My/yOKHKl+fu8CkLzLxyFjaHoYOMUPaxELRBHg5IST0ywjrYgaoqbjVLZPmOcamnEdEU42k09XgS
nQ3Lzr9PQ0NrLGwBqeQkwC2p8Esy0mioYFSH+Q==
`protect key_keyowner = "Synopsys", key_keyname= "SNPS-VCS-RSA-1", key_method = "rsa"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 128)
`protect key_block
BiYn69Saf66vv8xlV2GIFeO/YWzj+WsH4Rw/DKXfRd7eU7R4GIEBJEgGucn5o6L399cOgsneivWK
Fbi/jecG7bmyk2DhFtKBXcluVjfRxVCClVp44Ibt0GgONl0x9gCl/GI2ESRcru8u5QQIWh8SpQNH
1btlIAezhDHI9wk0D+k=
`protect key_keyowner = "Aldec", key_keyname= "ALDEC08_001", key_method = "rsa"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 256)
`protect key_block
S4p72U0eTTEWNqkxciCGDR9vJZrZMqzfzH/g7Kmg9Vniw+/g29OTnZpdoQGdQwjzARF68Yw9Ldvc
DAjHvXnjqiGznsYU6Lp1uDUDAY/nSC18an79HynEkeRsTsFk5wcwE/2MPv2FGrj43e82Emwzjmsm
1pIZFCji0T1tcSbnp1Umxn6ZTgPaGrfp4vAFSjXAyB5OlSFsbs3RzYKXr9gJIixQYe1bzU/Uj02j
dl90KVMterr0wotEawN4daHqcjx6e+1W+H/hu/AvCmdcVIYw8sCqx3xElFyRsJq9h+HtfJP2DArh
wwadKFMOEvD7d3OZ5xtxmumXo5pt9fEGEYnpcA==
`protect data_method = "AES128-CBC"
`protect encoding = (enctype = "BASE64", line_length = 76, bytes = 6272)
`protect data_block
GHHGRuu9Y64x63XFmJ//1acflUPbhdVVg6gQZT6LmZspQY1s1PrswU0nEKRZk+C5Y3gVrrMpgyYf
183P2BXfDGQsMsTqtzI5660XQKrHm40SXET5jVZZ2mBYW/tFpUe8DeUs0Ly0neDoYtXnyNLj69uD
Hlj46ocd2zroS1d+7RMqCwSmsWfCE9p56Vr9kQxRFkiP9uIoaQUztS6WV5FOopof/4Rcjy6to9wV
rO/5ZmIwh9WZkd5V1CCxttsON9X62ACYbGss5NTM8KmSHwonj/bmCh1g2LxI5wwl9+jwmpxZiLUJ
VK1LF10YD3GLgaAHumMASRJZukmj3O5A41Cl2ZOOe3i7kVv+SMCzbzvyWwGSJMG/Qm+HxiB1KD+Z
roIN7Y+e0ym378tyxed6WbT/mgCCGSb/oxLFEqcG9V1QfJTZyK4Ro0pCqE+DrLNQ75HKVfddiP3B
ImLq/Ia2MOI05uWXKoxYASZ7WL4noibV5J0Eh4oRpoatUmZt7oojhnnKrQdjwhw/Z0whRMAZX0Q3
B1TNHlbd/ZBohSyZf1Y3aSA7cjus9WiYkpevUcC0cMYUYEQVa9/H73VREoSq+HW+7/YbEhH73Hxb
8xLuUikVD+X/k4y4hBO1o9X66v3hmG8TGzhZfoW674gW389GSD6YL6NQtEFBYY5fiMfewMYb4v9H
cat8VilqpYn9ZoRNa0A8nhuF8VdpIjKddjUon4tpV+KFH5rg2b+nJUBjt2iufDR4Y47jLpwz75rQ
yBM7Mxg5/8hfdLQoZXC7y2mUGJXq8ab3mB8MwytmA/chwKoVXRaCXIGnUWUmaCOdpXjn3ammMHsq
4rcjYwsBBHGaMgjV+ofvl9do27GTl3vrRwYpaL5Rnxw7r79OejM4xnRNpjM9OZBNnohBlBJytriE
wGofgd9KUCF7LXnUNq/VnM0FdVdVv6dq1xpvGH26V7rAJ8Aq9aVYRHjVOH8rcLPlDvHkxk+K63Hg
jEb3Yknmk3aW1Oi0LzeRuEnKvYC5511HkJ0OTWW4kuUd0gHhH4/WDhBxS5mCJTqlMUD7PjGD3cV6
BSH8QRhyVdmkPdJTgn+Bxzb+emvAk5etISps4mZRboyR/AbjdibXJwtmkBUSW7YHnepeE1WrjARm
cex+I3VPhpEs8mWy95pA1jSuqEnS+eXrnWgtHCkb8K/COKSY7e0LQtbowvWVpp7XRcNge3AMu4RG
Cv7L8mAy7/scwQfNalr1jtvYEDH6cJ/uX304bizhgDjIm/yBVMM7JW27v2375tqXQZlUJVaR2HLF
+aaTGVK6T/e7u34/AlWGmxmw6RiYYvAXaIILFkumyhUhb+9VxOBiPwTZIyneJ193rFpRIeaYx+fe
WeyaMVpCDNq9rM+Resa4Lj6G6DVRyqHC6XNgVm28R5F69WKD/JNLbo3KHQLtJOj1mY6N3mXLjPMO
VynMBhhXHm0Erd7eMDHd37in4V0Z9dpaVBilOU1tsPVObA05wm9/p6X2uFIP3DHpP09TzVIGas1h
9Noyu8GMpN5cqVu8alOeA6br3A57lEy+04ygf1imVQHi/+QHgkibV1UhVxGFByQIg1E1NIiYVLEr
0KrCzV/BlJwc0q6MHvs2OPkBGXeZ5YVL+/rPxk/idVtFVZRaKZAuwVWr4VwYi277d37r5EhXj7cr
Y4s9XctoVuEnnaw9E88HE7c3x/aBipVQSZuoJm8JxBss+mOA02d7vKyrZmA2QqvikO379IGjspC2
p+EHTwh2r3WOzg0tQLUDgAVQHMANkEXx5kH9XK9HvWNw3J5FZEXbT+QUToIeNCAxz1X+NOL92ID/
0gxtCL8morm5TYwZ3RiAa3gOmwDr8jaoma36MhwHf90cJ8Ff5uK4O9V2WY4x+x7a52DcAuo8mowe
uPi1omaxTz7JWOUXTIK4b/Q7dC68SnSvEu/JqeCk2Rhj0IttCtnjDr50yHGUF3nPTmmMckQTF5OG
6t/KWwx0ACR3pSDCkABRgYlNO1qZ/3Oy9v9qih1khR50GRgShO9dp9/xR9LCK+lZqbutaSeHmtxZ
+hecXqrX596Whr4b5RwGdwHPZTDNxJGjz4oLc4VE9SaCbkumaTOh1sVzrEn3R4r/HPsS4rjLKwMJ
D65y+W7OY08l9iY6oiyf4tIKS218OpQr8mO+ysWQKwmGTfuazlksfVTEZiXpmQ2kEE4ZP3Vcr5pW
XF2e390WrhbfuFW9ttUMCAfY0F8E93YH/cxXq3SlVYPzK/LQp12DyseZ2gO19gTWRxb5TV/Y1Jfx
KlONc8wmSaPvbmuIyj5XTeJW1DiSMKKdC9Njd9/ajk9L2/qo8cb9eMStwUIm8OsMXT06MNuWumYR
kxdgl1s8j0Al+twS1QikGK3+li5v4f7NYkWSuGPr0Mwd5a3+vC79ZVBoJhTiTxZOPOd+meEQBi4a
iAMb+fymnMpNCSUq23GSDw1oHVkUdS3GIEy/sjwKKkosoO5UJnDUe36bmUMLAvkwvvX70YUZqXL4
TKMxfK3jFAAwcKbzGTjBNP1+/gwFfvedk6NUEAQljyQ1JGfnEJ+USjO25bQCwRlRNG9d6ECpUuuQ
S9yvYhSWyZn70RYmh6Xoj9HEL873ZTnYVv7fCZk2MuTXHx4raneERx8u2TKB4sdrkdofEPwdnGV/
PMAF/qzQaNCjPP4YVhu6Toud0oZUxNyf3VnHrrupt0GD8F5vkaTxRdofHP2wv1qQqOQkSq8MU+xU
eSkdHzVMYS5QEucToeiEBk8WlbdV1Q/bvedaN6Boi2E3vnm6BTiisZSp/n3Z7wJFJZeB9ntQzPbD
aRIBeSdflDS3l5b/Uh/OcBGC8JtylC2cDtifIFbww+j3oq9u7sjwJOKnxQ4beulII8kROoZcxzIL
HgEgpAZ0DNMw0ZL++7K9OP1gXOiKNq9eP1+iaoEIocgemMStP7HZ66PnhJoglXxSeDajpdMbOK8r
RUe46i9LQFEHX4p9md7DXd16CW+dC2LkB1QMaGEefK6QLdC/O/YqDdUZfvQHf2HKSI5ppzreRFi4
ZHINNTEB7mzr+MOIjVQ+RDwPR3xtPt/kZG5SsNM9+Q5/EsxUJswkhWrS5sJ/ZfofeRzu/ul+T4Zr
trBZVCO+S25tB8TixBaW8YPWN8ceIHcTkAfT0zG1Qlwt6AAUAKO0iqGjDfxEulAh7QysF7oxOPAq
29tH4+F0OX+5BIfzen5gS3zYKiXG8sb4Z65ehtBZZl0PNR9qRH08MGLlu4drvfLBYo+8WPlcBS1X
uOpioKtsLcvke9WhGpr/oVIGHH5rLa1m4ypknIUek4zaYVCLz2J5ZfiGOJYPHSMZFmBHbeKgIYpB
j5dqnXv6HAJET+UdAj4RRMaHe1MW4Yr5zm3now6z8bW1n2z9MYPZbEnF2hJtwYYyfuwUDVm8CXm5
dkLnABvgz5Pyp3zO4EzrXhX0Y7bqOdsztjEJ0oizK77w77I7RZ8hx8WXoA5CCMO3K7fUwnZz0jMf
5D8o/8yHxEuAdnUcjZ94sK2MoFZGW0ExVRCGCKAnN/k0BQZWeQHB5a51t6todaajsc7/Nwem1yxZ
vOc6n2vY+zB2ujoNMF4Wn29Mfk8dgzweXBM8tdcL7F1Vyp0AmjcDLt9/V+0nRTP7o84x3UU6KpG6
cxj/lKWQtG5sfR5J4aTo10goVMgmNU4uAPM0wTZ23iXtMAJ1lwoKFbVnW9dHdW76I81hW9FVQcTH
VA+4hULj3iEO6eI7Jc92nRR4QniVwFnuvIJa8WoaDYE+whr1XkL6XVq1UUTd2fJA5qiPBrPvluTi
dwTgjunUU81nPEUxOmitG+03iFXexepU5cgKZlbdVfufeHe35txDjye28tWJO5ek4BCwN72KDvtt
bE5CiXpun8wICUsV0AEMRNhxI0esposyuOzQ155IBW7Wk/Fejh9o02y4hz8X2fhu2uA75xB/PfL8
ZdHSo465tj24UBKbVSvzsHYzqN0/QdIDLRm6UFZoo0gO3jXpM3bdLucTPggUcOuxmjmVsJHOFLln
IdhQS7RD5Z/QbjjpBGlch08SJyhH+WMgLIflghmE+zHoVAvtFK6ggv+g99rRgRV/RSm7DjYShqPs
ZVtaMelDU5+yKNf8lgcINV84SxA9dYraUr4u3dsNCMJUWE4j+F/U0Zjg1IFjK/6AnxcdFFwwZDx0
hL9k0iVA8Me6+gtULYTPreKLeu2H97qdt+viPR5Nke+c8+zZQbPo7xR9cT9JpesZ2g+fOeQt6H7k
gGPAmcduuDNcuX9dUTRnMyDw8H3zmwsKXC49CR+95c3uXUrjoOHY0hXjH4Qo5HFZP1BLT+5xaj15
FXJ0xxr9+F3j6NmHfz9dI5nvdDLuX+RWY8svpyepaa5PcdMrcGKpmXOWj8CDPGjmHlFam7BdaSPM
wSOLCr2TycgQ5AYYt+0PVET/qjlSo1TRSXRZjulRZh0/qjdbcktAhr2T8C/zkidl1Qc7D/b44dzw
L2mtrL4CyNwQ+D5B55QNcqrBVQP2A4vPnzehINoDxVOYlsPfuRHevlk5bNTL+AkecbgKcjhBEmUQ
r/5f61QWVqcVuy3hjrZRvyCOxt33zKfXzULGBPKGql1gCbAQYe0GW+MXglZR2KPZOsDQV9qTBEhn
K/bpYYf7+Qtoy/rO/u/QHcAEcxURLuOl7DUTL9emP5+fCXEbdvlVSkwNZFG3mzEhf66djpim2Ug3
r4Fe5MI6UFLUOuoO6UhPn0X+oV/a6EJs+BATiNAeRjp/8Qowv1EGle46D7l3u2HpWrpfy7orrGqw
IBAvOVXppug56lR4dTkGNj6690GSAmGx2w0lOAM3uprvCu3NYKdLK/vpMKCv2WBuA/o6sHGM/ySE
G/O4LYETtnoYQpErnmWpiHI3L+FQGbz896fBossUvYn+U3jfn8q8ycRDntvwXKuh7V8La5rp3o+/
Uwygi6617NoaRU9AA61kDGDpeLLtDA/Ca5oWfFEjKS19zIxvaWrWHSTyqovYJCoViQjrE4/5Sr5j
OI/tZKVkHDw8VlD60/HugIaaLCkPVCCfEeC+4rnvlu2GWbmlpAdOXxewsz1z37k3GTGbWR7cs7PF
W7KRqqfDaBd1fK8JtQdp29C0gmAM5S8ngwizvxYiFKnV9MfhOY4FsXWek44a7xPVlDlJXOFAmDnt
0mgifE71mWB285H/wPJjKJsA55tbj5Sk/Sb9PQIiBWK2ivH1zDglgk6VC6PtdanmscVzLgBnyaJ8
I9Hqm35Fca3DB0GYYLFQ5MYFsJyau1OCMVNBeyzMoq6PjyyMVRUiKryO60sdWH6vuVlg8Bvt/N1c
PZCWSzWq/V84W8h6zu3mBBMI6u7GP8jTanjORZUYgb481qlN4/ZwSMCD0dd1MZrYifmFJ+hd3Mhq
vcIh56cVgjOXB87bxOZNGtTvN8yyD9da/mtJ+YX7xwxzd5IyLXDJeCKFfOlVg7QBaYwN2FSMSk+T
tubp15WmBiwiMVSQP84y75rshaMrnpcXuIZUEaukWM0GcwXPCou3BValgiYK9qPe2Hjrx8emJmvL
01xa8+dugJXokDkRIfNok9W3uV1gnfKFbCSgiVbB7YGrT0r2WnFFSEl8OtY75u6j9nStKBx9NrgI
OC8DViSu+CKN/DWCdIAsZBWqy9YYIIkgWAE3v/qDv+BzbBHl0R9lCFHE/veUGx/bNLMnEQf4ULqx
at3gOUJxt010JbKqes9Qj4tppFKEGHPPW2oxB/HPvTkSXNxL7LZ6gaZvgSh+BG5iBXa+WKe0MSKH
2dVPyp0l+SnZLgVgfro8mCVdQZ3T6+0f8j/NPuyG79BGvSBf/pJBi+KNVczY+g0G5hAbN98YoWkB
k552nRWSCwwKE2GLv+xvo9YelEFEZ4nZAXj4DL7rbsbSWLv7mhL6BXwAJ32U8n0eispHje1O02Yi
nNY61SHZTRmNi1Cj5l1OUShCIGellCdTIvU1LyqGwaEQjw+MlUamZqL6s7DHWdzBKzhBOg4XM06I
TSjEOQ6wcUaWbSTNGvIaU8HFntiAZ/WvAQukxcgpVvLvdMnTXdAyitSbJ7T/6jRBG6Gwl6ApstYR
E9NaTjmhFteaBBCBMBgMMnvuHHOlMJmKBPglbtA0S5rm93+4ddM/woC6CkwDQdngF8HCUiuNlDFN
HPaTtM7SSZBfk3M2PBgFngUu3Cd6FpfEdd7nyXNM0G11uZIIDwFM0/8TJIiSg28z1VeJnAhCpRFh
yYqrfQJ6VIjryUzdggZAMA+eNrg0SE4rav4Rli7tFoioBpJI6jKc8plp0VbyrQzfAIxuHNlDKyfs
W9aeXqe6pNkOtSgWw5SEnsTfS625d2NulVJE7jivxCBam7MyGV/c7GbhxMbe+ZY6/EmuuUvcbIrE
U/f7HMK+kTHo4ncSugiGed0alBOqUs7K+hrERJ3awQt8J9pcY2Q758ennniuSES1CrtzbzorSzEj
FHprjeIDVlHOis1XDzgWb4R2a+ZFH7oEoF16lw+Z9wZCN9besEPpUMLoaiTiKA1iJbGMGySjl2UR
nxY/Tmala3bfDqICu/QS1ztQAdFAMHzvczvfLj0c9OtZ9EL54kACWQvYzIJltmppv/HxgN6E+Sem
xz0r/M6zLGDINgelh8UvSKWAQDpiVKyqxYQ+sSmHR5aRONitcp2WfL4Wk5Sce+NptOP2FMQozY4Z
C0B6aPX1I89iqAgfzlKCLwxgEnKTwnd1nEHSEHlKYcZieIx4noB1lZf1pxzcSIPzuVYj2C+wTWZ4
uX0QYY3yzm2eOm5upDX2l+h7705WVd9zZYgt0AOvLICf5+130lTOgm3PHgpxE89S38vwZ5EbKQYw
uCBuLiybcVGhDbMMowjyyi0mQM2CALum2AeWG6kn2mxBAl35uMcZ0NakvNtp1aUAGW2FvawIoJXT
8ePpHSAjS5ClFt7OGI6B8j1yuF33dcC+Ldz/ruoVhlEfTno8uorxPB/GQq497lVuOLFNEsaw4CZl
0gCoouPMlOCld2XR638vke9t9G6ywBQ1chhYJLdW/z9J8eQozdeHYa3mjbJzUEuG8XFLhXrahKYg
LgHdl10gsPHEBTFBeQBt5Qkr3zfxAVwkerK6h9wVi26L0Ga/43xplat1DwhffLWebLP1AxEh9EOa
afubMy9KfosCQZpklg6bbr5PKMR18mp9Qg2eg93fgZObC2yF2tb9CU8GA3MrsoWcHqhSpOCjJ1+P
qNNI/vSNblCRiAXdKLNwKuIbVRukGYn/vdAAb0jrfoOjFBSTcmXXKPLtuCxJjmr1MXJZkoUdI5ER
7cmvg/Zw7+/RKVHtMa46srgTzQ/x2hIraUi7EmpMPXiF56HZeZfun1pkVkPNRkfQaatHZcTf5qou
AbqZLkbxf9/yxYv3irjdCMuDTB3Z4fnX83lyn83iamiVPityldgU26pzpzAtGH/NL2QUZsgB6O2I
ewMyr30tqWp+uAaTN6HCXSR5vlo3ERVsNNXL3tHc3b4zLQd/kKiTFWk+ReuBvmcjAHccIZ+QC9Kc
aM9lqpJ6/fTCt/AwfK9enD4yrklAAOtI/2Lh86+YXu0/ypeS59rdCQPcHjvTmk6+mT5+rZss1oax
C1NGOza3p412oubohngyxgN8F7KMjlDj0toqBQoRdlzlGqQKT9IR7nSP4M0fx4ScXIVAgn637lnl
4YcDeRxz5TGmuxUA28SUFjwvGK/sqoq/4QR6mMRycOAgHLhZw9ZZqjlhvT6A6GuShezDKdV/71B5
1O6NqZg4vPKqrzYo2sKmF9DhTRnoV8RdlB6EKurkgufwttX64/aS5Y0h2j6fh8dM0V7Qoo3UqQhq
haiRWYh97FuZbEGC0ciBtdX7AzNKShAZrOqtFiLbiLEDkXmccQWWbN829A8N40zcRRa7I0jpFGBQ
fbTZaqFK4HT/RxmCfm0jbe6Ais9DD7mwdILH0GCPVAIoeeI/BU84abMlk4mgyUFl5++7+pRtr3Nr
5XwGJzhID1kXRzCZELnofxaX6tjBHZTPtK3bvqp1uLVB4VwCnzFDlz11wS79CCqU1Ezrdv5d67Cz
ey7vGuO21rL51mpd5XZYwG6cQhPNOmCPOfFQSjzn+sTd9yyq7KGkvMk4XdKYFgvOEQVqifs6mDGZ
gZlYvPle7+dkZcFni5DI3A8hAaGegrJ5aN/s4UygN4vte9I7LM6iSG4Q9HzXg1+uZ9AwDx62pbXC
ERAEH8QoELqXy5Z7i+w9NyPo/z4kH16pbeWPPVoNJhQRWeE9V0I+OXpg5PHZDDDhatGYJIh7CPME
SY140KYacef5NSgvCozVnKAmn/03wJF+V7ilq+uTCbWh0AWl0Ofd9HrBzptl67u1rEtL1SezoKu7
A0U=
`protect end_protected
|
----------------------------------------------------------------------------------------------------
-- serial_multiplier.vhd ---
----------------------------------------------------------------------------------------------------
-- Author : Miguel Morales-Sandoval ---
-- Project : "Hardware Arquitecture for ECC and Lossless Data Compression ---
-- Organization : INAOE, Computer Science Department ---
-- Date : July, 2004. ---
----------------------------------------------------------------------------------------------------
-- Serial multiplier for F_2^m
----------------------------------------------------------------------------------------------------
-- Coments: The input buses need to have valid data when Reset signal is asserted
----------------------------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
--------------------------------------------------------
entity serial_multiplier_233 is
generic (
NUM_BITS : positive := 233 -- The order of the finite field
);
port(
ax : in std_logic_vector(NUM_BITS-1 downto 0);
bx : in std_logic_vector(NUM_BITS-1 downto 0);
cx : out std_logic_vector(NUM_BITS-1 downto 0); -- cx = ax*bx mod Fx
reset : in std_logic;
clk : in std_logic;
done : out std_logic
);
end serial_multiplier_233;
-----------------------------------------------------------
architecture behave of serial_multiplier_233 is
-----------------------------------------------------------
-- m = 233 x233 + x74 + 1
constant Fx: std_logic_vector(NUM_BITS-1 downto 0) := "00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000001";
-----------------------------------------------------------
signal Op1 : std_logic_vector(NUM_BITS-1 downto 0); -- Multiplexers for ax and cx depending upon b_i and c_m
signal Op2 : std_logic_vector(NUM_BITS-1 downto 0);
signal bx_shift : std_logic_vector(NUM_BITS-1 downto 0); -- B and C shifted one position to the rigth
signal cx_shift : std_logic_vector(NUM_BITS-1 downto 0);
signal bx_int : std_logic_vector(NUM_BITS-1 downto 0); -- Internal registers
signal cx_int : std_logic_vector(NUM_BITS-1 downto 0); -- Internal registers
signal counter: std_logic_vector(7 downto 0); -- 8-bit counter, controling the number of iterations: m
-----------------------------------------------------------
-- States for the finite state machine
-----------------------------------------------------------
type CurrentState_type is (END_STATE, MUL_STATE);
signal CurrentState: CurrentState_type;
-----------------------------------------------------------
begin
-----------------------------------------------------------
cx <= cx_int; -- Result of the multiplication
Bx_shift <= bx_int(NUM_BITS-2 downto 0)& '0'; -- Shift Bx and Cx to left one position
Cx_shift <= cx_int(NUM_BITS-2 downto 0)& '0';
-- Multiplexer to determine what value is added to C_x in each iteration
Op1 <= ax when bx_int(NUM_BITS-1) = '1' else -- The selector for these multiplexors are the most significant bits of B_x and C_x
(others => '0');
Op2 <= Fx when cx_int(NUM_BITS-1) = '1' else
(others => '0');
------------------------------------------------------------
-- The finite state machine, it takes m cycles to compute
-- the multiplication, a counter is used to keep this count
------------------------------------------------------------
FSM_MUL: process (CLK)
Begin
if CLK'event and CLK = '1' then
if Reset = '1' then
counter <= "11101000"; -- m-1 value, in this case, it is 162, be sure to set the correct value
bx_int <= bx;
cx_int <= (others => '0');
Done <= '0';
CurrentState <= MUL_STATE;
else
case CurrentState is
when MUL_STATE => -- processes a bit of bx
Cx_int <= cx_shift xor Op1 xor Op2;
counter <= counter - 1;
if counter = "00000000" then -- The done signal is asserted at the same time that the result is computed.
CurrentState <= END_STATE;
Done <= '1';
else
bx_int <= bx_shift;
end if;
when END_STATE =>
CurrentState <= END_STATE;
Done <= '0';
when others =>
null;
end case;
end if;
end if;
end process;
end behave;
|
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity compar is
port (
a : in std_logic_vector(3 downto 0);
b : in std_logic_vector(3 downto 0);
so_a : out std_logic;
so_b : out std_logic
);
end entity;
architecture behav of compar is
signal a_b, b_b,a_b1, b_b1,a_b2, b_b2,a_b3, b_b3, a_b4, b_b4: std_logic;
begin
a_b<='0';
b_b<='0';
a_b1<=(a(0) and (not b(0))) or (a_b and a(0)) or ((a_b and (not (b(0)))));
b_b1<=((not a(0)) and b(0)) or ((not a(0)) and b_b) or (b(0) and b_b);
a_b2<=(a(1) and (not b(1))) or (a_b1 and a(1)) or ((a_b1 and (not (b(1)))));
b_b2<=((not a(1)) and b(1)) or ((not a(1)) and b_b1) or (b(1) and b_b1);
a_b3<=(a(2) and (not b(2))) or (a_b2 and a(2)) or ((a_b2 and (not (b(1)))));
b_b3<=((not a(2)) and b(2)) or ((not a(2)) and b_b2) or (b(2) and b_b2);
a_b4<=(a(3) and (not b(3))) or (a_b3 and a(3)) or ((a_b3 and (not (b(3)))));
b_b4<=((not a(3)) and b(3)) or ((not a(3)) and b_b3) or (b(3) and b_b3);
so_a <= a_b4;
so_b <= b_b4;
end architecture;
|
----------------------------------------------------------------------------------------------------
-- inverter_maia.vhd ---
----------------------------------------------------------------------------------------------------
-- Inverter for F_2^m
----------------------------------------------------------------------------------------------------
-- Author : Miguel Morales-Sandoval ---
-- Project : "Hardware Arquitecture for ECC and Lossless Data Compression ---
-- Organization : INAOE, Computer Science Department ---
-- Date : July, 2004. ---
----------------------------------------------------------------------------------------------------
-- Coments: This is an implementation of the Modified Almost Inverse Algorithm.
-- The input buses need to have valid data when Reset signal is asserted.
-- All internal registers and operations are performed one bit more than the input
----------------------------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use IEEE.STD_LOGIC_unsigned.all;
use IEEE.STD_LOGIC_arith.all;
--------------------------------------------------------
entity inverter_maia is
generic(
NUM_BITS : positive := 163 -- The order of the finite field
);
port(
ax : in STD_LOGIC_VECTOR(NUM_BITS-1 downto 0); -- input polynomial of grade m-1
Fx : in STD_LOGIC_VECTOR(NUM_BITS downto 0); -- prime polynomial of grade m
clk : in STD_LOGIC;
rst : in STD_LOGIC;
done : out STD_LOGIC;
z : out STD_LOGIC_VECTOR(NUM_BITS-1 downto 0)
);
end inverter_maia;
---------------------------------------------------------
architecture behave of inverter_maia is
---------------------------------------------------------
signal B,C,U,V : STD_LOGIC_VECTOR(NUM_BITS downto 0); -- Internal processing registers, one bit more
signal Bx_Op1 : STD_LOGIC_VECTOR(NUM_BITS downto 0); -- Multiplexer which depends on if B is ever or odd
signal Ux_div_x : STD_LOGIC_VECTOR(NUM_BITS downto 0); -- U and B divided by x
signal Bx_div_x : STD_LOGIC_VECTOR(NUM_BITS downto 0);
constant UNO : STD_LOGIC_VECTOR(NUM_BITS downto 0) := "00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001";
signal grade_u : std_logic_vector(7 downto 0); -- Return the grade of U and V, it is assumed they are less than 256
signal grade_v : std_logic_vector(7 downto 0);
signal done_gu, done_gv, rst_grade: std_logic;
----------------------------------------------------------------------------------
-- States fot the FSM controlling the execution of the algorithm
----------------------------------------------------------------------------------
type CurrentState_type is (END_STATE, WAIT_GRADE, LOOP_U0, CALC_GRADE, NEXT_STEP);
signal State: CurrentState_type;
----------------------------------------------------------------------------------
begin
------------------------------------------------------
Ux_div_x <= '0' & U(NUM_BITS downto 1); -- Dividing U and B by x
Bx_div_x <= '0' & Bx_Op1(NUM_BITS downto 1);
------------------------------------------------------
Bx_Op1 <= B xor Fx when B(0) = '1' else -- Multiplexer for operand B
B;
------------------------------------------------------
-- Two instances for computing the grade of U and V
------------------------------------------------------
gradeU: entity work.grade(grade)
port map (rst_grade, clk, U, done_gu, grade_u);
gradeV: entity work.grade(grade)
port map (rst_grade, clk, V, done_gv, grade_v);
-------------------------------------------------------
-- The Modified ALmost Inverse Algorithm implementation
-------------------------------------------------------
EEAL: process (clk)
begin -- syncronous reset
if CLK'event and CLK = '1' then
if (rst = '1')then -- initialize internal registers
State <= LOOP_U0;
B <= UNO;
U <= '0'&Ax;
V <= Fx;
C <= (others => '0');
z <= (others => '0'); -- set to zero the output register
Done <= '0';
rst_grade <= '0';
else
case State is
-----------------------------------------------------------------------------------
when LOOP_U0 => -- Stay here while U be even
if U(0) = '1' then
if U = UNO then -- The algorithm finishes when U = 1
Z <= B(NUM_BITS-1 downto 0);
Done <= '1';
State <= END_STATE;
else -- Compute the grade of the the currents values of U and V
rst_grade <= '1';
State <= CALC_GRADE;
end if;
else -- Divide U and B and repeat the process
U <= Ux_div_x;
B <= Bx_div_x;
end if;
-----------------------------------------------------------------------------------
when CALC_GRADE => -- generate the reset signal and wait for the result
rst_grade <= '0';
state <= WAIT_GRADE;
-----------------------------------------------------------------------------------
when WAIT_GRADE =>
if done_gu = '1' and done_gv = '1' then
if(grade_u < grade_v) then -- Interchange the registers U <-> V and B <-> C
U <= V;
V <= U;
B <= C;
C <= B;
end if;
State <= NEXT_STEP; -- wait a cycle to compute with the current values assigned
end if;
-----------------------------------------------------------------------------------
when NEXT_STEP => -- update U and B with the values previously assigned
U <= U xor V;
B <= B xor C;
State <= LOOP_U0;
-----------------------------------------------------------------------------------
when END_STATE => -- Do nothing
State <= END_STATE;
-----------------------------------------------------------------------------------
when others =>
null;
end case;
end if;
end if;
end process;
end behave; |
-- -----------------------------------------------------------------------
--
-- Syntiac VHDL support files.
--
-- -----------------------------------------------------------------------
-- Copyright 2005-2009 by Peter Wendrich ([email protected])
-- http://www.syntiac.com
--
-- This source file is free software: you can redistribute it and/or modify
-- it under the terms of the GNU Lesser General Public License as published
-- by the Free Software Foundation, either version 3 of the License, or
-- (at your option) any later version.
--
-- This source file is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program. If not, see <http://www.gnu.org/licenses/>.
--
-- -----------------------------------------------------------------------
--
-- PS/2 mouse driver
--
-- Uses: io_ps2_com
--
-- -----------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.numeric_std.ALL;
-- -----------------------------------------------------------------------
entity io_ps2_mouse is
generic (
-- Enable support for intelli-mouse mode.
-- This allows the use of the scroll-wheel on mice that have them.
intelliMouseSupport : boolean := true;
-- Number of system-cycles used for PS/2 clock filtering
clockFilter : integer := 15;
-- Timer calibration
ticksPerUsec : integer := 33 -- 33 Mhz clock
);
port (
clk: in std_logic;
reset : in std_logic := '0';
ps2_clk_in: in std_logic;
ps2_dat_in: in std_logic;
ps2_clk_out: out std_logic;
ps2_dat_out: out std_logic;
mousePresent : out std_logic;
trigger : out std_logic;
leftButton : out std_logic;
middleButton : out std_logic;
rightButton : out std_logic;
deltaX : out signed(8 downto 0);
deltaY : out signed(8 downto 0);
deltaZ : out signed(3 downto 0)
);
end entity;
-- -----------------------------------------------------------------------
architecture rtl of io_ps2_mouse is
constant ticksPer100Usec : integer := ticksPerUsec * 100;
constant tickTimeout : integer := ticksPerUsec * 3500000;
type mainStateDef is (
stateInit, stateInitAA, stateInitID, stateReset, stateReset2, stateResetAck,
intelliKnock, intelliKnockAck, intelliCheckId,
stateSetDataReporting, stateSetDataReportingAck,
stateWaitByte1, stateWaitByte2, stateWaitByte3, stateWaitByte4);
signal masterState : mainStateDef := stateInit;
signal timeoutCount : integer range 0 to tickTimeout := 0;
signal resetCom : std_logic;
signal inIdle : std_logic;
signal recvTrigger : std_logic := '0';
signal sendTrigger : std_logic := '0';
signal sendBusy : std_logic;
signal sendByte : unsigned(7 downto 0);
signal recvByte : unsigned(10 downto 0);
signal intelliMouse : std_logic := '0';
signal intelliCnt : unsigned(2 downto 0) := "000";
begin
myPs2Com : entity work.io_ps2_com
generic map (
clockFilter => clockFilter,
ticksPerUsec => ticksPerUsec
)
port map (
clk => clk,
reset => resetCom,
ps2_clk_in => ps2_clk_in,
ps2_dat_in => ps2_dat_in,
ps2_clk_out => ps2_clk_out,
ps2_dat_out => ps2_dat_out,
inIdle => inIdle,
sendTrigger => sendTrigger,
sendByte => sendByte,
sendBusy => sendBusy,
recvTrigger => recvTrigger,
recvByte => recvByte
);
--
-- Mouse state machine
process(clk)
begin
if rising_edge(clk) then
resetCom <= '0';
mousePresent <= '0';
trigger <= '0';
sendTrigger <= '0';
if timeoutCount /= 0 then
timeoutCount <= timeoutCount - 1;
else
masterState <= stateReset;
end if;
case masterState is
--
-- Reset sequence states
--
when stateReset =>
resetCom <= '1';
timeoutCount <= tickTimeout;
masterState <= stateReset2;
when stateReset2 =>
-- Reset mouse
if sendBusy = '0' then
sendByte <= X"FF";
sendTrigger <= '1';
masterState <= stateResetAck;
end if;
when stateResetAck =>
if recvTrigger = '1' then
masterState <= stateInit;
end if;
--
-- Mouse BAT handling states (Basic assurance test)
--
when stateInit =>
-- Wait for mouse to perform self-test
timeoutCount <= tickTimeout;
masterState <= stateInitAA;
when stateInitAA =>
-- Receive selftest result. It should be AAh.
if recvTrigger = '1' then
if recvByte(8 downto 1) = X"AA" then
masterState <= stateInitID;
end if;
end if;
when stateInitID =>
-- Receive device ID (it isn't checked)
if recvTrigger = '1' then
timeoutCount <= tickTimeout;
masterState <= stateSetDataReporting;
intelliCnt <= (others => '0');
if intelliMouseSupport then
masterState <= intelliKnock;
end if;
end if;
--
-- Intelli Mouse knock sequence for wheel support
--
when intelliKnock =>
if sendBusy = '0' then
sendTrigger <= '1';
masterState <= intelliKnockAck;
intelliCnt <= intelliCnt + 1;
case intelliCnt is
when "000" => sendByte <= X"F3"; -- Set sample rate
when "001" => sendByte <= X"C8"; -- Rate 200
when "010" => sendByte <= X"F3"; -- Set sample rate
when "011" => sendByte <= X"64"; -- Rate 100
when "100" => sendByte <= X"F3"; -- Set sample rate
when "101" => sendByte <= X"50"; -- Rate 80
when "110" => sendByte <= X"F2"; -- Request ID
when others => sendByte <= (others => '-');
end case;
end if;
when intelliKnockAck =>
if recvTrigger = '1' then
masterState <= intelliKnock;
-- End of knock sequence, check the mouse ID
if intelliCnt = "111" then
masterState <= intelliCheckId;
end if;
end if;
when intelliCheckId =>
if recvTrigger = '1' then
masterState <= stateSetDataReporting;
intelliMouse <= '0';
if recvByte(8 downto 1) = X"03" then
intelliMouse <= '1';
end if;
end if;
--
-- Enable data reporting
--
when stateSetDataReporting =>
if sendBusy = '0' then
sendByte <= X"F4";
sendTrigger <= '1';
masterState <= stateSetDataReportingAck;
end if;
when stateSetDataReportingAck =>
if recvTrigger = '1' then
masterState <= stateWaitByte1;
end if;
--
-- Receive movement packet
--
when stateWaitByte1 =>
mousePresent <= '1';
if inIdle = '1' then
timeoutCount <= tickTimeout;
end if;
if recvTrigger = '1' then
leftButton <= recvByte(1);
rightButton <= recvByte(2);
middleButton <= recvByte(3);
deltaX(8) <= recvByte(5);
deltaY(8) <= recvByte(6);
masterState <= stateWaitByte2;
end if;
when stateWaitByte2 =>
mousePresent <= '1';
if recvTrigger = '1' then
deltaX(7 downto 0) <= signed(recvByte(8 downto 1));
masterState <= stateWaitByte3;
end if;
when stateWaitByte3 =>
mousePresent <= '1';
if recvTrigger = '1' then
deltaY(7 downto 0) <= signed(recvByte(8 downto 1));
if intelliMouse = '1' then
masterState <= stateWaitByte4;
else
deltaZ <= (others => '0');
trigger <= '1';
masterState <= stateWaitByte1;
end if;
end if;
when stateWaitByte4 =>
mousePresent <= '1';
if recvTrigger = '1' then
deltaZ <= signed(recvByte(4 downto 1));
trigger <= '1';
masterState <= stateWaitByte1;
end if;
end case;
if reset = '1' then
masterState <= stateReset;
end if;
end if;
end process;
end architecture;
|
library IEEE;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_unsigned.all;
entity BRESENHAMER is
port (
WRITEENABLE : out std_logic;
X : out std_logic_vector(9 downto 0);
Y : out std_logic_vector(8 downto 0);
X1 : in std_logic_vector(9 downto 0);
Y1 : in std_logic_vector(8 downto 0);
X2 : in std_logic_vector(9 downto 0);
Y2 : in std_logic_vector(8 downto 0);
SS : out std_logic_vector(3 downto 0);
CLK : in std_logic;
STARTDRAW : in std_logic;
DBG : out std_logic_vector(11 downto 0);
RESET : in std_logic
);
end entity BRESENHAMER;
architecture BEHAVIORAL of BRESENHAMER is
signal myx1, myx2 : std_logic_vector(11 downto 0);
signal myy1, myy2 : std_logic_vector(11 downto 0);
signal p : std_logic_vector(11 downto 0);
signal p0_1 : std_logic_vector(11 downto 0);
signal p0_2 : std_logic_vector(11 downto 0);
signal p0_3 : std_logic_vector(11 downto 0);
signal p0_4 : std_logic_vector(11 downto 0);
signal p0_5 : std_logic_vector(11 downto 0);
signal p0_6 : std_logic_vector(11 downto 0);
signal p0_7 : std_logic_vector(11 downto 0);
signal p0_8 : std_logic_vector(11 downto 0);
signal p_1 : std_logic_vector(11 downto 0);
signal p_2 : std_logic_vector(11 downto 0);
signal p_3 : std_logic_vector(11 downto 0);
signal p_4 : std_logic_vector(11 downto 0);
signal p_5 : std_logic_vector(11 downto 0);
signal p_6 : std_logic_vector(11 downto 0);
signal p_7 : std_logic_vector(11 downto 0);
signal p_8 : std_logic_vector(11 downto 0);
signal ndx, ndy : std_logic_vector(11 downto 0);
signal dx : std_logic_vector(11 downto 0);
signal dy : std_logic_vector(11 downto 0);
signal t_2dx : std_logic_vector(11 downto 0);
signal t_2dy : std_logic_vector(11 downto 0);
signal neg_dx : std_logic_vector(11 downto 0);
signal neg_dy : std_logic_vector(11 downto 0);
signal t_2neg_dx : std_logic_vector(11 downto 0);
signal t_2neg_dy : std_logic_vector(11 downto 0);
signal dx_minus_dy : std_logic_vector(11 downto 0);
signal minus_dx_minus_dy : std_logic_vector(11 downto 0);
signal minus_dx_plus_dy : std_logic_vector(11 downto 0);
signal dx_plus_dy : std_logic_vector(11 downto 0);
signal state : std_logic_vector(3 downto 0) := "0000";
signal condx1x2, condy1y2 : std_logic;
signal ccounter : std_logic_vector(18 downto 0) := "0000000000000000000";
constant idle : std_logic_vector(3 downto 0) := "0000";
constant init : std_logic_vector(3 downto 0) := "0001";
constant case1 : std_logic_vector(3 downto 0) := "0010";
constant case2 : std_logic_vector(3 downto 0) := "0011";
constant case3 : std_logic_vector(3 downto 0) := "0100";
constant case4 : std_logic_vector(3 downto 0) := "0101";
constant case5 : std_logic_vector(3 downto 0) := "0110";
constant case6 : std_logic_vector(3 downto 0) := "0111";
constant case7 : std_logic_vector(3 downto 0) := "1000";
constant case8 : std_logic_vector(3 downto 0) := "1001";
constant clear : std_logic_vector(3 downto 0) := "1010";
begin
ndx <= ("00" & X2) - ("00" & X1);
ndy <= ("000" & Y2) - ("000" & Y1);
neg_dx <= 0 - dx;
neg_dy <= 0 - dy;
DBG <= p;
dx_minus_dy <= dx + neg_dy;
minus_dx_minus_dy <= neg_dx + neg_dy;
minus_dx_plus_dy <= neg_dx + dy;
dx_plus_dy <= dx + dy;
t_2dy <= dy(10 downto 0) & '0';
t_2dx <= dx(10 downto 0) & '0';
t_2neg_dy <= neg_dy(10 downto 0) & '0';
t_2neg_dx <= neg_dx(10 downto 0) & '0';
p0_1 <= t_2dy + neg_dx;
p0_2 <= t_2dx + neg_dy;
p0_3 <= t_2neg_dx + dy;
p0_4 <= t_2dy + neg_dx;
p0_5 <= t_2neg_dy + dx;
p0_6 <= t_2neg_dx + dy;
p0_7 <= t_2dx + neg_dy;
p0_8 <= t_2neg_dy + dx;
p_1 <= p + t_2dy when p(11)='1' else
p + t_2dy + t_2neg_dx;
p_2 <= p + t_2dx when p(11)='1' else
p + t_2dx + t_2neg_dy;
p_3 <= p + t_2neg_dx when p(11)='1' else
p + t_2neg_dx + t_2neg_dy;
p_4 <= p + t_2dy when p(11)='1' else
p + t_2dy + t_2dx;
p_5 <= p + t_2neg_dy when p(11)='1' else
p + t_2neg_dy + t_2dx;
p_6 <= p + t_2neg_dx when p(11)='1' else
p + t_2neg_dx + t_2dy;
p_7 <= p + t_2dx when p(11)='1' else
p + t_2dx + t_2dy;
p_8 <= p + t_2neg_dy when p(11)='1' else
p + t_2neg_dy + t_2neg_dx;
X <= ccounter(9 downto 0) when state = clear else
myx1(9 downto 0);
Y <= ccounter(18 downto 10) when state = clear else
myy1(8 downto 0);
SS <= state;
WRITEENABLE <= '0' when state = idle or state = init else
'1';
process (CLK) is
begin
if (rising_edge(CLK)) then
if (state = idle) then
if (RESET = '1') then
state <= clear;
ccounter <= (others => '0');
elsif (STARTDRAW = '1') then
myx1(9 downto 0) <= X1;
myx1(11 downto 10) <= "00";
myy1(8 downto 0) <= Y1;
myy1(11 downto 9) <= "000";
myx2(9 downto 0) <= X2;
myx2(11 downto 10) <= "00";
myy2(8 downto 0) <= Y2;
myy2(11 downto 9) <= "000";
dx <= ndx;
dy <= ndy;
state <= init;
end if;
elsif (state = init) then
if (dx(11) = '0' and dy(11) = '0' and dx_minus_dy(11) = '0') then
state <= case1;
p <= p0_1;
elsif (dx(11) = '0' and dy(11) = '0' and dx_minus_dy(11) = '1') then
state <= case2;
p <= p0_2;
elsif (dx(11) = '1' and dy(11) = '0' and minus_dx_minus_dy(11) = '1') then
state <= case3;
p <= p0_3;
elsif (dx(11) = '1' and dy(11) = '0' and minus_dx_minus_dy(11) = '0') then
state <= case4;
p <= p0_4;
elsif (dx(11) = '1' and dy(11) = '1' and minus_dx_plus_dy(11) = '0') then
state <= case5;
p <= p0_5;
elsif (dx(11) = '1' and dy(11) = '1' and minus_dx_plus_dy(11) = '1') then
state <= case6;
p <= p0_6;
elsif (dx(11) = '0' and dy(11) = '1' and dx_plus_dy(11) = '1') then
state <= case7;
p <= p0_7;
else
state <= case8;
p <= p0_8;
end if;
elsif (state = case1) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 + 1;
p <= p_1;
if (p(11) = '0') then
myy1 <= myy1 + 1;
end if;
end if;
elsif (state = case2) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 + 1;
p <= p_2;
if (p(11) = '0') then
myx1 <= myx1 + 1;
end if;
end if;
elsif (state = case3) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 + 1;
p <= p_3;
if (p(11) = '0') then
myx1 <= myx1 - 1;
end if;
end if;
elsif (state = case4) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 - 1;
p <= p_4;
if (p(11) = '0') then
myy1 <= myy1 + 1;
end if;
end if;
elsif (state = case5) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 - 1;
p <= p_5;
if (p(11) = '0') then
myy1 <= myy1 - 1;
end if;
end if;
elsif (state = case6) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 - 1;
p <= p_6;
if (p(11) = '0') then
myx1 <= myx1 - 1;
end if;
end if;
elsif (state = case7) then
if (myy1 = myy2) then
state <= idle;
else
myy1 <= myy1 - 1;
p <= p_7;
if (p(11) = '0') then
myx1 <= myx1 + 1;
end if;
end if;
elsif (state = case8) then
if (myx1 = myx2) then
state <= idle;
else
myx1 <= myx1 + 1;
p <= p_8;
if (p(11) = '0') then
myy1 <= myy1 - 1;
end if;
end if;
elsif (state = clear) then
ccounter <= ccounter + 1;
if (ccounter = "1111111111111111111") then
state <= idle;
end if;
end if;
end if;
end process;
end architecture BEHAVIORAL;
|
---------------------------------------------------------------------------------------------------
-- divider_f2m.vhd ---
----------------------------------------------------------------------------------------------------
-- Author : Miguel Morales-Sandoval ---
-- Project : "Hardware Arquitecture for ECC and Lossless Data Compression ---
-- Organization : INAOE, Computer Science Department ---
-- Date : July, 2004. ---
----------------------------------------------------------------------------------------------------
-- Inverter for F_2^m
----------------------------------------------------------------------------------------------------
-- Coments: This is an implementation of the division algorithm. Dirent to the other implemented inverter
-- in this, the division is performed directly.
----------------------------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.all;
use IEEE.STD_LOGIC_unsigned.all;
use IEEE.STD_LOGIC_arith.all;
----------------------------------------------------------------------------------------------------
entity f2m_divider_163 is
generic(
NUM_BITS : positive := 163
);
port(
x : in STD_LOGIC_VECTOR(NUM_BITS-1 downto 0);
y : in STD_LOGIC_VECTOR(NUM_BITS-1 downto 0);
clk : in STD_LOGIC;
rst : in STD_LOGIC;
done : out STD_LOGIC;
x_div_y : out STD_LOGIC_VECTOR(NUM_BITS-1 downto 0) -- U = x/y mod Fx,
);
end;
----------------------------------------------------------------------------------------------------
architecture behave of f2m_divider_163 is
----------------------------------------------------------------------------------------------------
-- m = 163, the irreductible polynomial
constant p : std_logic_vector(NUM_BITS downto 0) := "10000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000011001001";
-- control signals
signal CASO: std_logic_vector(1 downto 0);
signal c0, c1, c2, c3, c4, c5, c6, enA, enB, a_greater_b,a_eq_b: std_logic;
signal A, B, U, V, X2, Y2, toB, toV: STD_LOGIC_VECTOR(NUM_BITS downto 0); -- Internal registers
type CurrentState_type is (END_STATE, LOAD1, CYCLE);
signal currentState: CurrentState_type;
----------------------------------------------------------------------------------------------------
begin
----------------------------------------------------------------------------------------------------
X2 <= x & '0';
Y2 <= y & '0';
caso <= "00" when A(0) = '0' and currentState = CYCLE else
"01" when B(0) = '0' and currentState = CYCLE else
"10" when a_greater_b = '1' and currentState = CYCLE else
"11";
c0 <= '0' when caso = "01" else
'1';
c1 <= '0' when caso = "00" else
'1';
c2 <= '0' when caso = "01" else
'1';
c3 <= '0' when caso = "00" else
'1';
c4 <= '0' when CurrentState = Load1 else
'1';
c5 <= '0' when rst = '1' or currentState = LOAD1 else
'1';
c6 <= '0' when rst = '1' else
'1';
enA <= '1' when currentState = LOAD1 or caso = "00" or caso = "10" else
'0';
enB <= '1' when caso = "01" or caso = "11" or rst = '1' or currentstate = LOAD1 else
'0';
a_greater_b <= '1' when A > B else
'0';
a_eq_b <= '1' when A = B else
'0';
celda_reg_A: entity celda_a(behave)
port map( A, B, c0, c1, enA, rst, clk, toB, A);
celda_reg_U: entity celda_U(behave)
port map(U, V, P, c2, c3, c4, enA, rst, clk, toV, U);
celda_reg_B: entity celda_B(behave)
port map(toB, P , Y2, c5, c6, enB, clk, B);
celda_reg_V: entity celda_v(behave)
port map(toV, X2, c5, c6, enB, clk, V);
----------------------------------------------------------------------------------------------------
-- Finite state machine
----------------------------------------------------------------------------------------------------
EEAL: process (clk)
begin -- syncronous reset
if CLK'event and CLK = '1' then
if rst = '1' then
x_div_y <= (others => '0');
done <= '0';
currentState <= LOAD1;
else
case currentState is
-----------------------------------------------------------------------------------
when LOAD1 =>
currentState <= Cycle;
when CYCLE =>
if A_eq_B = '1' then
currentState <= END_STATE;
Done <= '1';
x_div_y <= U(NUM_BITS-1 downto 0);
end if;
-----------------------------------------------------------------------------------
when END_STATE => -- Do nothing
currentState <= END_STATE;
--done <= '0'; -- para generar el pulso, quitarlo entity caso contrario
-----------------------------------------------------------------------------------
when others =>
null;
end case;
end if;
end if;
end process;
end behave; |
------------------------------------------------------------------------------
-- This file is a part of the GRLIB VHDL IP LIBRARY
-- Copyright (C) 2003 - 2008, Gaisler Research
-- Copyright (C) 2008 - 2014, Aeroflex Gaisler
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; either version 2 of the License, or
-- (at your option) any later version.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-------------------------------------------------------------------------------
-- Copyright (C) 2009-2013, Aeroflex Gaisler AB
-------------------------------------------------------------------------------
-- Entity: spw_2x_lvttl_pads
-- File: spw_2x_lvttl_pads.vhd
-- Author: Marko Isomaki, Aeroflex Gaisler
-- Contact: [email protected]
-- Description: pads for SpW signals in router ASIC LVTTL ports
-------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
library work;
use work.config.all;
library techmap;
use techmap.gencomp.all;
library grlib;
use grlib.stdlib.conv_std_logic;
entity spw_lvttl_pads is
generic (
padtech : integer := 0;
oepol : integer := 0;
level : integer := 0;
voltage : integer := 0;
filter : integer := 0;
strength : integer := 4;
slew : integer := 0;
input_type : integer := 0
);
port (
---------------------------------------------------------------------------
-- Signals going off-chip
---------------------------------------------------------------------------
spw_rxd : in std_logic_vector(0 to CFG_SPW_NUM-1);
spw_rxs : in std_logic_vector(0 to CFG_SPW_NUM-1);
spw_txd : out std_logic_vector(0 to CFG_SPW_NUM-1);
spw_txs : out std_logic_vector(0 to CFG_SPW_NUM-1);
---------------------------------------------------------------------------
-- Signals to core
---------------------------------------------------------------------------
lspw_rxd : out std_logic_vector(0 to CFG_SPW_NUM-1);
lspw_rxs : out std_logic_vector(0 to CFG_SPW_NUM-1);
lspw_txd : in std_logic_vector(0 to CFG_SPW_NUM-1);
lspw_txs : in std_logic_vector(0 to CFG_SPW_NUM-1)
);
end entity;
architecture rtl of spw_lvttl_pads is
begin
------------------------------------------------------------------------------
-- SpW port pads
------------------------------------------------------------------------------
spw_pads : for i in 0 to CFG_SPW_NUM-1 generate
spw_pad_input: if input_type <= 3 generate
spw_rxd_pad : inpad
generic map (
tech => padtech,
level => level,
voltage => voltage,
filter => filter,
strength => strength)
port map (
pad => spw_rxd(i),
o => lspw_rxd(i));
spw_rxs_pad : inpad
generic map (
tech => padtech,
level => level,
voltage => voltage,
filter => filter,
strength => strength)
port map (
pad => spw_rxs(i),
o => lspw_rxs(i));
end generate;
spw_no_pad_input: if input_type >= 4 generate
lspw_rxd(i) <= spw_rxd(i);
lspw_rxs(i) <= spw_rxs(i);
end generate;
spw_txd_pad : outpad
generic map (
tech => padtech,
level => level,
slew => slew,
voltage => voltage,
strength => strength)
port map (
pad => spw_txd(i),
i => lspw_txd(i));
spw_txs_pad : outpad
generic map (
tech => padtech,
level => level,
slew => slew,
voltage => voltage,
strength => strength)
port map (
pad => spw_txs(i),
i => lspw_txs(i));
end generate;
end;
|
----------------------------------------------------------------------------
--! @file
--! @copyright Copyright 2015 GNSS Sensor Ltd. All right reserved.
--! @author Sergey Khabarov
--! @brief Virtual clock multiplexer with buffered output.
------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
library techmap;
use techmap.gencomp.all;
entity bufgmux_tech is
generic
(
tech : integer := 0;
tmode_always_ena : boolean := false
);
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end;
architecture rtl of bufgmux_tech is
component bufgmux_fpga is
generic (
tmode_always_ena : boolean := false
);
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end component;
component bufgmux_micron180 is
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end component;
begin
inf : if tech = inferred generate
O <= I1 when S = '0' else I2;
end generate;
xlnx : if tech = virtex6 or tech = kintex7 or tech = artix7 generate
mux_buf : bufgmux_fpga generic map (
tmode_always_ena => tmode_always_ena
) port map (
O => O,
I1 => I1,
I2 => I2,
S => S
);
end generate;
mic0 : if tech = micron180 generate
mux_buf : bufgmux_micron180
port map (
O => O,
I1 => I1,
I2 => I2,
S => S
);
end generate;
end;
|
----------------------------------------------------------------------------
--! @file
--! @copyright Copyright 2015 GNSS Sensor Ltd. All right reserved.
--! @author Sergey Khabarov
--! @brief Virtual clock multiplexer with buffered output.
------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
library techmap;
use techmap.gencomp.all;
entity bufgmux_tech is
generic
(
tech : integer := 0;
tmode_always_ena : boolean := false
);
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end;
architecture rtl of bufgmux_tech is
component bufgmux_fpga is
generic (
tmode_always_ena : boolean := false
);
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end component;
component bufgmux_micron180 is
port (
O : out std_ulogic;
I1 : in std_ulogic;
I2 : in std_ulogic;
S : in std_ulogic
);
end component;
begin
inf : if tech = inferred generate
O <= I1 when S = '0' else I2;
end generate;
xlnx : if tech = virtex6 or tech = kintex7 or tech = artix7 generate
mux_buf : bufgmux_fpga generic map (
tmode_always_ena => tmode_always_ena
) port map (
O => O,
I1 => I1,
I2 => I2,
S => S
);
end generate;
mic0 : if tech = micron180 generate
mux_buf : bufgmux_micron180
port map (
O => O,
I1 => I1,
I2 => I2,
S => S
);
end generate;
end;
|
-- tdp_ram_behav.vhd
-- Copyright (C) 2017 VectorBlox Computing, Inc.
--
-- Behavioural implementation of synchronous true dual-port RAM.
-- Can either be read first or write first.
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
library work;
use work.idram_utils.all;
entity tdp_ram_behav is
generic (
RAM_DEPTH : integer := 1024;
RAM_WIDTH : integer := 8;
WRITE_FIRST : boolean := false
);
port
(
address_a : in std_logic_vector(log2(RAM_DEPTH)-1 downto 0);
address_b : in std_logic_vector(log2(RAM_DEPTH)-1 downto 0);
clk : in std_logic;
data_a : in std_logic_vector(RAM_WIDTH-1 downto 0);
data_b : in std_logic_vector(RAM_WIDTH-1 downto 0);
wren_a : in std_logic;
wren_b : in std_logic;
en_a : in std_logic;
en_b : in std_logic;
readdata_a : out std_logic_vector(RAM_WIDTH-1 downto 0);
readdata_b : out std_logic_vector(RAM_WIDTH-1 downto 0)
);
end tdp_ram_behav;
architecture rtl of tdp_ram_behav is
type ram_type is array (RAM_DEPTH-1 downto 0) of std_logic_vector(RAM_WIDTH-1 downto 0);
shared variable ram : ram_type;
begin
read_first_gen : if not WRITE_FIRST generate
process (clk)
begin
if rising_edge(clk) then
if en_a = '1' then
readdata_a <= ram(to_integer(unsigned(address_a)));
if wren_a = '1' then
ram(to_integer(unsigned(address_a))) := data_a;
end if;
end if;
end if;
end process;
process (clk)
begin
if rising_edge(clk) then
if en_b = '1' then
readdata_b <= ram(to_integer(unsigned(address_b)));
if wren_b = '1' then
ram(to_integer(unsigned(address_b))) := data_b;
end if;
end if;
end if;
end process;
end generate read_first_gen;
write_first_gen : if WRITE_FIRST generate
process (clk)
begin
if rising_edge(clk) then
if en_a = '1' then
if wren_a = '1' then
ram(to_integer(unsigned(address_a))) := data_a;
end if;
readdata_a <= ram(to_integer(unsigned(address_a)));
end if;
end if;
end process;
process (clk)
begin
if rising_edge(clk) then
if en_b = '1' then
if wren_b = '1' then
ram(to_integer(unsigned(address_b))) := data_b;
end if;
readdata_b <= ram(to_integer(unsigned(address_b)));
end if;
end if;
end process;
end generate write_first_gen;
end rtl;
|
---------------------------------------------------------------------------------
-- Title : 1000 BASE X ability match
-- Project : General Purpose Core
---------------------------------------------------------------------------------
-- File : Eth1000BaseXAbilityMatch.vhd
-- Author : Kurtis Nishimura
---------------------------------------------------------------------------------
-- Description:
-- Ability, acknowledge, consistency, idle match for Clause 37 auto-negotiation
-- Next pages are not supported.
---------------------------------------------------------------------------------
LIBRARY ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
use work.UtilityPkg.all;
use work.Eth1000BaseXPkg.all;
use work.GigabitEthPkg.all;
entity Eth1000BaseXAbilityMatch is
generic (
GATE_DELAY_G : time := 1 ns
);
port (
-- System clock, reset & control
ethRx62Clk : in sl;
ethRx62Rst : in sl;
-- Link is stable
rxLinkSync : in sl;
-- Entering a new state (abMatch should be reset on new state)
newState : in sl;
-- Output match signals
abilityMatch : out sl;
ability : out slv(15 downto 0);
acknowledgeMatch : out sl;
consistencyMatch : out sl;
idleMatch : out sl;
-- Physical Interface Signals
phyRxData : in EthRxPhyLaneInType
);
end Eth1000BaseXAbilityMatch;
-- Define architecture
architecture rtl of Eth1000BaseXAbilityMatch is
type RegType is record
ability : slv(15 downto 0);
abCount : slv(2 downto 0);
ackCount : slv(2 downto 0);
idleCount : slv(2 downto 0);
abMatch : sl;
ackMatch : sl;
consMatch : sl;
idleMatch : sl;
wordIsConfig : sl;
end record RegType;
constant REG_INIT_C : RegType := (
ability => (others => '0'),
abCount => (others => '0'),
ackCount => (others => '0'),
idleCount => (others => '0'),
abMatch => '0',
ackMatch => '0',
consMatch => '0',
idleMatch => '0',
wordIsConfig => '0'
);
signal r : RegType := REG_INIT_C;
signal rin : RegType;
-- attribute dont_touch : string;
-- attribute dont_touch of r : signal is "true";
begin
comb : process(r,phyRxData,ethRx62Rst,rxLinkSync,newState) is
variable v : RegType;
begin
v := r;
-- Check for /C1/ or /C2/
if ( phyRxData.dataK = "01" and
(phyRxData.data = OS_C1_C or phyRxData.data = OS_C2_C)) then
v.wordIsConfig := '1';
else
v.wordIsConfig := '0';
end if;
-- On /I1/ or /I2/, reset abCount and ackCount
if ( phyRxData.dataK = "01" and
(phyRxData.data = OS_I1_C or phyRxData.dataK = OS_I2_C)) then
v.abCount := (others => '0');
v.ackCount := (others => '0');
-- If we just saw /C1/ or /C2/ the next word is the ability word
elsif (r.wordIsConfig = '1') then
v.ability := phyRxData.data;
-- If the ability word doesn't match the last one, reset the counter
-- Note we ignore the ack bit in this comparison
if (v.ability(15) /= r.ability(15) or (v.ability(13 downto 0) /= r.ability(13 downto 0))) then
v.abCount := (others => '0');
-- Otherwise, we match. Increment the ability count
elsif (r.abCount < 3) then
v.abCount := r.abCount + 1;
end if;
-- For acknowledge, need a match and the ack bit set or we reset
if (v.ability /= r.ability or (r.ability(14) = '0')) then
v.ackCount := (others => '0');
-- Otherwise, we match. Increment the ability count
elsif (r.ackCount < 3) then
v.ackCount := r.ackCount + 1;
end if;
end if;
-- On /C1/ or /C2/, reset idle count
if ( r.wordIsConfig = '1' ) then
v.idleCount := (others => '0');
-- If see /I1/ or /I2/ increment the idle count
elsif (phyRxData.dataK = "01" and (phyRxData.data = OS_I1_C or phyRxData.data = OS_I2_C) ) then
if (r.idleCount < 3) then
v.idleCount := r.idleCount + 1;
end if;
end if;
-- If the ability count is 3, we're matched
if (r.abCount = 3) then
v.abMatch := '1';
-- Otherwise, we're not
else
v.abMatch := '0';
end if;
-- If the acknowledge count is 3, we're matched
if (r.ackCount = 3) then
v.ackMatch := '1';
-- Otherwise, we're not
else
v.ackMatch := '0';
end if;
-- If the idle count is 3, we're matched
if (r.idleCount = 3) then
v.idleMatch := '1';
-- Otherwise, we're not
else
v.idleMatch := '0';
end if;
-- Check for consistency match
if (v.abMatch = '1' and v.ackMatch = '1') then
v.consMatch := '1';
else
v.consMatch := '0';
end if;
-- Reset on ethernet reset or sync down
if (ethRx62Rst = '1' or rxLinkSync = '0' or newState = '1') then
v := REG_INIT_C;
end if;
-- Outputs to ports
abilityMatch <= r.abMatch;
acknowledgeMatch <= r.ackMatch;
consistencyMatch <= r.consMatch;
idleMatch <= r.idleMatch;
ability <= r.ability;
rin <= v;
end process;
seq : process (ethRx62Clk) is
begin
if (rising_edge(ethRx62Clk)) then
r <= rin after GATE_DELAY_G;
end if;
end process seq;
end rtl;
|
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use IEEE.MATH_REAL.ALL;
use std.textio.all;
use work.all;
use work.dbgsnap;
entity dbgsnap_testbench is
port(done : out boolean);
end;
architecture structural of dbgsnap_testbench is
signal finished : boolean;
signal clk : boolean;
signal tr : std_logic;
signal dbg_in : unsigned(15 downto 0):= to_unsigned(0,16);
function to_stdulogic( V: Boolean ) return std_ulogic is
begin
if V then
return '1';
else
return '0';
end if;
end to_stdulogic;
begin
done <= finished;
-- pragma translate_off
process is
begin
clk <= false;
wait for 3 ns;
while (not finished) loop
clk <= not clk;
wait for 500 ns;
clk <= not clk;
wait for 500 ns;
end loop;
wait;
end process;
process is
begin
wait for 3 ns;
while (not finished) loop
dbg_in <= dbg_in + 1;
wait for 1000 ns;
end loop;
wait;
end process;
-- pragma translate_on
-- pragma translate_off
-- pragma translate_on
totest : entity dbgsnap
port map
( clk => to_stdulogic(clk)
, tr => tr
, dbg_in => std_logic_vector(dbg_in)
);
tr <=
-- pragma translate_off
'0',
-- pragma translate_on
'1'
-- pragma translate_off
after 1000 ns
-- pragma translate_on
;
finished <=
-- pragma translate_off
false,
-- pragma translate_on
true
-- pragma translate_off
after 8200000 ns
-- pragma translate_on
;
end;
|
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use IEEE.MATH_REAL.ALL;
use std.textio.all;
use work.all;
use work.dbgsnap;
entity dbgsnap_testbench is
port(done : out boolean);
end;
architecture structural of dbgsnap_testbench is
signal finished : boolean;
signal clk : boolean;
signal tr : std_logic;
signal dbg_in : unsigned(15 downto 0):= to_unsigned(0,16);
function to_stdulogic( V: Boolean ) return std_ulogic is
begin
if V then
return '1';
else
return '0';
end if;
end to_stdulogic;
begin
done <= finished;
-- pragma translate_off
process is
begin
clk <= false;
wait for 3 ns;
while (not finished) loop
clk <= not clk;
wait for 500 ns;
clk <= not clk;
wait for 500 ns;
end loop;
wait;
end process;
process is
begin
wait for 3 ns;
while (not finished) loop
dbg_in <= dbg_in + 1;
wait for 1000 ns;
end loop;
wait;
end process;
-- pragma translate_on
-- pragma translate_off
-- pragma translate_on
totest : entity dbgsnap
port map
( clk => to_stdulogic(clk)
, tr => tr
, dbg_in => std_logic_vector(dbg_in)
);
tr <=
-- pragma translate_off
'0',
-- pragma translate_on
'1'
-- pragma translate_off
after 1000 ns
-- pragma translate_on
;
finished <=
-- pragma translate_off
false,
-- pragma translate_on
true
-- pragma translate_off
after 8200000 ns
-- pragma translate_on
;
end;
|
-- Copyright (C) 2001 Bill Billowitch.
-- Some of the work to develop this test suite was done with Air Force
-- support. The Air Force and Bill Billowitch assume no
-- responsibilities for this software.
-- This file is part of VESTs (Vhdl tESTs).
-- VESTs is free software; you can redistribute it and/or modify it
-- under the terms of the GNU General Public License as published by the
-- Free Software Foundation; either version 2 of the License, or (at
-- your option) any later version.
-- VESTs is distributed in the hope that it will be useful, but WITHOUT
-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-- for more details.
-- You should have received a copy of the GNU General Public License
-- along with VESTs; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- ---------------------------------------------------------------------
--
-- $Id: tc719.vhd,v 1.2 2001-10-26 16:29:59 paw Exp $
-- $Revision: 1.2 $
--
-- ---------------------------------------------------------------------
ENTITY c01s01b00x00p04n01i00719ent IS
BEGIN
END; -- No_Failure_Here
ENTITY c01s01b00x00p04n01i00719ent IS
END c01s01b00x00p04n01i00719ent;
ARCHITECTURE c01s01b00x00p04n01i00719arch OF c01s01b00x00p04n01i00719ent IS
BEGIN
TESTING: PROCESS
BEGIN
assert FALSE
report "***PASSED TEST: c01s01b00x00p04n01i00719"
severity NOTE;
wait;
END PROCESS TESTING;
END c01s01b00x00p04n01i00719arch;
|
-- Copyright (C) 2001 Bill Billowitch.
-- Some of the work to develop this test suite was done with Air Force
-- support. The Air Force and Bill Billowitch assume no
-- responsibilities for this software.
-- This file is part of VESTs (Vhdl tESTs).
-- VESTs is free software; you can redistribute it and/or modify it
-- under the terms of the GNU General Public License as published by the
-- Free Software Foundation; either version 2 of the License, or (at
-- your option) any later version.
-- VESTs is distributed in the hope that it will be useful, but WITHOUT
-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-- for more details.
-- You should have received a copy of the GNU General Public License
-- along with VESTs; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- ---------------------------------------------------------------------
--
-- $Id: tc719.vhd,v 1.2 2001-10-26 16:29:59 paw Exp $
-- $Revision: 1.2 $
--
-- ---------------------------------------------------------------------
ENTITY c01s01b00x00p04n01i00719ent IS
BEGIN
END; -- No_Failure_Here
ENTITY c01s01b00x00p04n01i00719ent IS
END c01s01b00x00p04n01i00719ent;
ARCHITECTURE c01s01b00x00p04n01i00719arch OF c01s01b00x00p04n01i00719ent IS
BEGIN
TESTING: PROCESS
BEGIN
assert FALSE
report "***PASSED TEST: c01s01b00x00p04n01i00719"
severity NOTE;
wait;
END PROCESS TESTING;
END c01s01b00x00p04n01i00719arch;
|
-- Copyright (C) 2001 Bill Billowitch.
-- Some of the work to develop this test suite was done with Air Force
-- support. The Air Force and Bill Billowitch assume no
-- responsibilities for this software.
-- This file is part of VESTs (Vhdl tESTs).
-- VESTs is free software; you can redistribute it and/or modify it
-- under the terms of the GNU General Public License as published by the
-- Free Software Foundation; either version 2 of the License, or (at
-- your option) any later version.
-- VESTs is distributed in the hope that it will be useful, but WITHOUT
-- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-- for more details.
-- You should have received a copy of the GNU General Public License
-- along with VESTs; if not, write to the Free Software Foundation,
-- Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- ---------------------------------------------------------------------
--
-- $Id: tc719.vhd,v 1.2 2001-10-26 16:29:59 paw Exp $
-- $Revision: 1.2 $
--
-- ---------------------------------------------------------------------
ENTITY c01s01b00x00p04n01i00719ent IS
BEGIN
END; -- No_Failure_Here
ENTITY c01s01b00x00p04n01i00719ent IS
END c01s01b00x00p04n01i00719ent;
ARCHITECTURE c01s01b00x00p04n01i00719arch OF c01s01b00x00p04n01i00719ent IS
BEGIN
TESTING: PROCESS
BEGIN
assert FALSE
report "***PASSED TEST: c01s01b00x00p04n01i00719"
severity NOTE;
wait;
END PROCESS TESTING;
END c01s01b00x00p04n01i00719arch;
|
-- A simple frequency divider
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity divider is
-- 1
-- f_out = f_in -----
-- 2 * n
generic (n: natural range 1 to 2147483647);
port (
clk_in : in std_logic;
nrst : in std_logic;
clk_out : out std_logic
);
end entity divider;
architecture counter of divider is
signal cnt : integer range 0 to n - 1;
signal internal_clk_out : std_logic := '0';
begin
clk_out <= internal_clk_out;
process (clk_in, nrst)
begin
if nrst = '0' then
cnt <= 0;
internal_clk_out <= '0';
elsif rising_edge (clk_in) then
if cnt = n - 1 then
cnt <= 0;
internal_clk_out <= not internal_clk_out;
else
cnt <= cnt + 1;
end if;
end if;
end process;
end architecture counter;
|
entity tb_func08b is
end tb_func08b;
library ieee;
use ieee.std_logic_1164.all;
architecture behav of tb_func08b is
signal v : std_ulogic_vector(3 downto 0);
signal r : integer;
begin
dut: entity work.func08b
port map (v, r);
process
begin
v <= x"0";
wait for 1 ns;
assert r = 4 severity failure;
v <= x"1";
wait for 1 ns;
assert r = 3 severity failure;
v <= x"8";
wait for 1 ns;
assert r = 0 severity failure;
v <= x"3";
wait for 1 ns;
assert r = 2 severity failure;
wait;
end process;
end behav;
|
entity record_test is
port (
o : out integer
);
end record_test;
architecture rtl of record_test is
type t_record is record
int : integer range 0 to 15;
end record t_record;
constant rec_constant : t_record := (int => 8);
signal int_signal : integer range 0 to rec_constant.int := 4;
begin
o <= int_signal;
end rtl;
|
-------------------------------------------------------------------------------
--
-- Synthesizable model of TI's TMS9918A, TMS9928A, TMS9929A.
--
-- $Id: vdp18_core.vhd,v 1.28 2006/06/18 10:47:01 arnim Exp $
--
-- Core Toplevel
--
-- Notes:
-- This core implements a simple VRAM interface which is suitable for a
-- synchronous SRAM component. There is currently no support of the
-- original DRAM interface.
--
-- Please be aware that the colors might me slightly different from the
-- original TMS9918. It is assumed that the simplified conversion to RGB
-- encoding is equivalent to the compatability mode of the V9938.
-- Implementing a 100% correct color encoding for RGB would require
-- significantly more logic and 8-bit wide RGB DACs.
--
-- References:
--
-- * TI Data book TMS9918.pdf
-- http://www.bitsavers.org/pdf/ti/_dataBooks/TMS9918.pdf
--
-- * Sean Young's tech article:
-- http://bifi.msxnet.org/msxnet/tech/tms9918a.txt
--
-- * Paul Urbanus' discussion of the timing details
-- http://bifi.msxnet.org/msxnet/tech/tmsposting.txt
--
-- * Richard F. Drushel's article series
-- "This Week With My Coleco ADAM"
-- http://junior.apk.net/~drushel/pub/coleco/twwmca/index.html
--
-------------------------------------------------------------------------------
--
-- Copyright (c) 2006, Arnim Laeuger ([email protected])
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- Redistributions of source code must retain the above copyright notice,
-- this list of conditions and the following disclaimer.
--
-- Redistributions in synthesized form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- Neither the name of the author nor the names of other contributors may
-- be used to endorse or promote products derived from this software without
-- specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
-- Please report bugs to the author, but before you do so, please
-- make sure that this is not a derivative work and that
-- you have the latest version of this file.
--
-- 2016/11 - Some changes by Fabio Belavenuto
-------------------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.std_logic_unsigned.all;
use work.vdp18_pack.opmode_t;
use work.vdp18_pack.hv_t;
use work.vdp18_pack.access_t;
use work.vdp18_pack.to_boolean_f;
use work.vdp18_pack.to_std_logic_f;
entity vdp18_core is
generic (
video_opt_g : integer := 0 -- 0 = no dblscan, 1 = dblscan configurable, 2 = dblscan always enabled, 3 = no dblscan and external palette
);
port (
-- Global Interface -------------------------------------------------------
clock_i : in std_logic;
clk_en_10m7_i : in std_logic;
por_i : in std_logic;
reset_i : in std_logic;
-- CPU Interface ----------------------------------------------------------
csr_n_i : in std_logic;
csw_n_i : in std_logic;
mode_i : in std_logic_vector( 0 to 1);
int_n_o : out std_logic;
cd_i : in std_logic_vector( 0 to 7);
cd_o : out std_logic_vector( 0 to 7);
wait_o : out std_logic;
-- VRAM Interface ---------------------------------------------------------
vram_ce_o : out std_logic;
vram_oe_o : out std_logic;
vram_we_o : out std_logic;
vram_a_o : out std_logic_vector( 0 to 13);
vram_d_o : out std_logic_vector( 0 to 7);
vram_d_i : in std_logic_vector( 0 to 7);
-- Video Interface --------------------------------------------------------
vga_en_i : in std_logic;
scanline_en_i : in std_logic;
cnt_hor_o : out std_logic_vector( 8 downto 0);
cnt_ver_o : out std_logic_vector( 7 downto 0);
rgb_r_o : out std_logic_vector( 0 to 3);
rgb_g_o : out std_logic_vector( 0 to 3);
rgb_b_o : out std_logic_vector( 0 to 3);
hsync_n_o : out std_logic;
vsync_n_o : out std_logic;
ntsc_pal_i : in std_logic; -- 0 = NTSC
vertfreq_csw_o : out std_logic;
vertfreq_d_o : out std_logic
);
end vdp18_core;
architecture struct of vdp18_core is
signal por_s : boolean;
signal reset_s : boolean;
signal clk_en_10m7_s,
clk_en_5m37_s,
-- clk_en_3m58_s,
clk_en_acc_s : boolean;
signal opmode_s : opmode_t;
signal access_type_s : access_t;
signal num_pix_s,
num_line_s : hv_t;
signal rgb_hsync_n_s : std_logic;
signal rgb_vsync_n_s : std_logic;
signal vga_hsync_n_s : std_logic;
signal vga_vsync_n_s : std_logic;
signal blank_s : boolean;
signal vert_inc_s : boolean;
signal reg_blank_s,
reg_size1_s,
reg_mag1_s : boolean;
signal spr_5th_s : boolean;
signal spr_5th_num_s : std_logic_vector(0 to 4);
signal stop_sprite_s : boolean;
signal vert_active_s,
hor_active_s : boolean;
signal rd_s,
wr_s : boolean;
signal reg_ntb_s : std_logic_vector(0 to 3);
signal reg_ctb_s : std_logic_vector(0 to 7);
signal reg_pgb_s : std_logic_vector(0 to 2);
signal reg_satb_s : std_logic_vector(0 to 6);
signal reg_spgb_s : std_logic_vector(0 to 2);
signal reg_col1_s,
reg_col0_s : std_logic_vector(0 to 3);
signal cpu_vram_a_s : std_logic_vector(0 to 13);
signal pat_table_s : std_logic_vector(0 to 9);
signal pat_name_s : std_logic_vector(0 to 7);
signal pat_col_s : std_logic_vector(0 to 3);
signal spr_num_s : std_logic_vector(0 to 4);
signal spr_line_s : std_logic_vector(0 to 3);
signal spr_name_s : std_logic_vector(0 to 7);
signal spr0_col_s,
spr1_col_s,
spr2_col_s,
spr3_col_s : std_logic_vector(0 to 3);
signal spr_coll_s : boolean;
signal irq_s : boolean;
signal vram_read_s : boolean;
signal vram_write_s : boolean;
signal col_s : std_logic_vector(0 to 3);
signal col_rgb_s : std_logic_vector(0 to 3);
signal col_vga_s : std_logic_vector(0 to 3);
signal rgb_s : std_logic_vector(0 to 15);
signal palette_idx_s : std_logic_vector(0 to 3);
signal palette_val_s : std_logic_vector(0 to 15);
signal palette_wr_s : std_logic;
signal ntsc_pal_e_s : std_logic;
signal oddline_s : std_logic := '0';
begin
clk_en_10m7_s <= to_boolean_f(clk_en_10m7_i);
rd_s <= not to_boolean_f(csr_n_i);
wr_s <= not to_boolean_f(csw_n_i);
por_s <= por_i = '1';
reset_s <= reset_i = '1';
-----------------------------------------------------------------------------
-- Clock Generator
-----------------------------------------------------------------------------
clk_gen_b: entity work.vdp18_clk_gen
port map (
clock_i => clock_i,
clk_en_10m7_i => clk_en_10m7_i,
reset_i => por_s,
clk_en_5m37_o => clk_en_5m37_s,
clk_en_3m58_o => open, --clk_en_3m58_s,
clk_en_2m68_o => open
);
-----------------------------------------------------------------------------
-- Horizontal and Vertical Timing Generator
-----------------------------------------------------------------------------
hor_vert_b: entity work.vdp18_hor_vert
port map (
clock_i => clock_i,
clk_en_5m37_i => clk_en_5m37_s,
reset_i => por_s,
opmode_i => opmode_s,
ntsc_pal_i => ntsc_pal_e_s,
num_pix_o => num_pix_s,
num_line_o => num_line_s,
vert_inc_o => vert_inc_s,
hsync_n_o => rgb_hsync_n_s,
vsync_n_o => rgb_vsync_n_s,
blank_o => blank_s,
cnt_hor_o => cnt_hor_o,
cnt_ver_o => cnt_ver_o
);
-----------------------------------------------------------------------------
-- Control Module
-----------------------------------------------------------------------------
ctrl_b: entity work.vdp18_ctrl
port map (
clock_i => clock_i,
clk_en_5m37_i => clk_en_5m37_s,
reset_i => reset_s,
opmode_i => opmode_s,
vram_read_i => vram_read_s,
vram_write_i => vram_write_s,
vram_ce_o => vram_ce_o,
vram_oe_o => vram_oe_o,
num_pix_i => num_pix_s,
num_line_i => num_line_s,
vert_inc_i => vert_inc_s,
reg_blank_i => reg_blank_s,
reg_size1_i => reg_size1_s,
stop_sprite_i => stop_sprite_s,
clk_en_acc_o => clk_en_acc_s,
access_type_o => access_type_s,
vert_active_o => vert_active_s,
hor_active_o => hor_active_s,
irq_o => irq_s
);
-----------------------------------------------------------------------------
-- CPU I/O Module
-----------------------------------------------------------------------------
cpu_io_b: entity work.vdp18_cpuio
port map (
clock_i => clock_i,
clk_en_10m7_i => clk_en_10m7_s,
clk_en_acc_i => clk_en_acc_s,
reset_i => por_s,
rd_i => rd_s,
wr_i => wr_s,
mode_i => mode_i,
cd_i => cd_i,
cd_o => cd_o,
cd_oe_o => open,
wait_o => wait_o,
access_type_i => access_type_s,
opmode_o => opmode_s,
vram_read_o => vram_read_s,
vram_write_o => vram_write_s,
vram_we_o => vram_we_o,
vram_a_o => cpu_vram_a_s,
vram_d_o => vram_d_o,
vram_d_i => vram_d_i,
spr_coll_i => spr_coll_s,
spr_5th_i => spr_5th_s,
spr_5th_num_i => spr_5th_num_s,
reg_ev_o => open,
reg_16k_o => open,
reg_blank_o => reg_blank_s,
reg_size1_o => reg_size1_s,
reg_mag1_o => reg_mag1_s,
reg_ntb_o => reg_ntb_s,
reg_ctb_o => reg_ctb_s,
reg_pgb_o => reg_pgb_s,
reg_satb_o => reg_satb_s,
reg_spgb_o => reg_spgb_s,
reg_col1_o => reg_col1_s,
reg_col0_o => reg_col0_s,
palette_idx_o => palette_idx_s,
palette_val_o => palette_val_s,
palette_wr_o => palette_wr_s,
irq_i => irq_s,
int_n_o => int_n_o,
vertfreq_csw_o => vertfreq_csw_o,
vertfreq_d_o => vertfreq_d_o
);
-----------------------------------------------------------------------------
-- VRAM Address Multiplexer
-----------------------------------------------------------------------------
addr_mux_b: entity work.vdp18_addr_mux
port map (
access_type_i => access_type_s,
opmode_i => opmode_s,
num_line_i => num_line_s,
reg_ntb_i => reg_ntb_s,
reg_ctb_i => reg_ctb_s,
reg_pgb_i => reg_pgb_s,
reg_satb_i => reg_satb_s,
reg_spgb_i => reg_spgb_s,
reg_size1_i => reg_size1_s,
cpu_vram_a_i => cpu_vram_a_s,
pat_table_i => pat_table_s,
pat_name_i => pat_name_s,
spr_num_i => spr_num_s,
spr_line_i => spr_line_s,
spr_name_i => spr_name_s,
vram_a_o => vram_a_o
);
-----------------------------------------------------------------------------
-- Pattern Generator
-----------------------------------------------------------------------------
pattern_b: entity work.vdp18_pattern
port map (
clock_i => clock_i,
clk_en_5m37_i => clk_en_5m37_s,
clk_en_acc_i => clk_en_acc_s,
reset_i => reset_s,
opmode_i => opmode_s,
access_type_i => access_type_s,
num_line_i => num_line_s,
vram_d_i => vram_d_i,
vert_inc_i => vert_inc_s,
vsync_n_i => rgb_vsync_n_s,
reg_col1_i => reg_col1_s,
reg_col0_i => reg_col0_s,
pat_table_o => pat_table_s,
pat_name_o => pat_name_s,
pat_col_o => pat_col_s
);
-----------------------------------------------------------------------------
-- Sprite Generator
-----------------------------------------------------------------------------
sprite_b: entity work.vdp18_sprite
port map (
clock_i => clock_i,
clk_en_5m37_i => clk_en_5m37_s,
clk_en_acc_i => clk_en_acc_s,
reset_i => reset_s,
access_type_i => access_type_s,
num_pix_i => num_pix_s,
num_line_i => num_line_s,
vram_d_i => vram_d_i,
vert_inc_i => vert_inc_s,
reg_size1_i => reg_size1_s,
reg_mag1_i => reg_mag1_s,
spr_5th_o => spr_5th_s,
spr_5th_num_o => spr_5th_num_s,
stop_sprite_o => stop_sprite_s,
spr_coll_o => spr_coll_s,
spr_num_o => spr_num_s,
spr_line_o => spr_line_s,
spr_name_o => spr_name_s,
spr0_col_o => spr0_col_s,
spr1_col_o => spr1_col_s,
spr2_col_o => spr2_col_s,
spr3_col_o => spr3_col_s
);
-----------------------------------------------------------------------------
-- Color Multiplexer
-----------------------------------------------------------------------------
col_mux_b: entity work.vdp18_col_mux
port map (
vert_active_i => vert_active_s,
hor_active_i => hor_active_s,
blank_i => blank_s,
reg_col0_i => reg_col0_s,
pat_col_i => pat_col_s,
spr0_col_i => spr0_col_s,
spr1_col_i => spr1_col_s,
spr2_col_i => spr2_col_s,
spr3_col_i => spr3_col_s,
col_o => col_rgb_s
);
von3: if video_opt_g /= 3 generate
ntsc_pal_e_s <= ntsc_pal_i;
-----------------------------------------------------------------------------
-- Palette memory
-----------------------------------------------------------------------------
palette: entity work.vdp18_palette
port map (
reset_i => reset_s,
clock_i => clock_i,
we_i => palette_wr_s,
addr_wr_i => palette_idx_s,
data_i => palette_val_s,
addr_rd_i => col_s,
data_o => rgb_s
);
-----------------------------------------------------------------------------
-- Process rgb_reg
--
-- Purpose:
-- Converts the color information to simple RGB and saves these in
-- output registers.
--
rgb_reg: process (clock_i, por_s)
begin
if por_s then
rgb_r_o <= (others => '0');
rgb_g_o <= (others => '0');
rgb_b_o <= (others => '0');
elsif rising_edge(clock_i) then
if clk_en_10m7_s then
if scanline_en_i = '1' and vga_en_i = '1' then
if rgb_s( 0 to 3) > 1 and oddline_s = '1' then
rgb_r_o <= rgb_s( 0 to 3) - 2;
else
rgb_r_o <= rgb_s( 0 to 3);
end if;
if rgb_s(12 to 15) > 1 and oddline_s = '1' then
rgb_g_o <= rgb_s(12 to 15) - 2;
else
rgb_g_o <= rgb_s(12 to 15);
end if;
if rgb_s( 4 to 7) > 1 and oddline_s = '1' then
rgb_b_o <= rgb_s( 4 to 7) - 2;
else
rgb_b_o <= rgb_s( 4 to 7);
end if;
else
rgb_r_o <= rgb_s( 0 to 3);
rgb_g_o <= rgb_s(12 to 15);
rgb_b_o <= rgb_s( 4 to 7);
end if;
end if;
end if;
end process rgb_reg;
--
-----------------------------------------------------------------------------
end generate;
vo0: if video_opt_g = 0 generate
col_s <= col_rgb_s;
hsync_n_o <= rgb_hsync_n_s;
vsync_n_o <= rgb_vsync_n_s;
end generate;
vo3: if video_opt_g = 3 generate
ntsc_pal_e_s <= '0'; -- Only NTSC
rgb_r_o <= col_rgb_s;
rgb_g_o <= (others => '0');
rgb_b_o <= (others => '0');
hsync_n_o <= rgb_hsync_n_s;
vsync_n_o <= rgb_vsync_n_s;
end generate;
vo1_2: if video_opt_g = 1 or video_opt_g = 2 generate
col_s <= col_vga_s when vga_en_i = '1' or video_opt_g = 2 else col_rgb_s;
scandbl: entity work.dblscan
port map (
-- NOTE CLOCKS MUST BE PHASE LOCKED !!
clk_6m_i => clock_i,
clk_en_6m_i => to_std_logic_f(clk_en_5m37_s),
clk_12m_i => clock_i,
clk_en_12m_i => to_std_logic_f(clk_en_10m7_s),
col_i => col_rgb_s,
col_o => col_vga_s,
oddline_o => oddline_s,
hsync_n_i => rgb_hsync_n_s,
vsync_n_i => rgb_vsync_n_s,
hsync_n_o => vga_hsync_n_s,
vsync_n_o => vga_vsync_n_s
);
hsync_n_o <= vga_hsync_n_s when vga_en_i = '1' or video_opt_g = 2 else rgb_hsync_n_s;
vsync_n_o <= vga_vsync_n_s when vga_en_i = '1' or video_opt_g = 2 else rgb_vsync_n_s;
end generate;
end architecture;
|
----------------------------------------------------------------------------------
-- Company:
-- Engineer:
--
-- Create Date: 20:00:58 11/19/2013
-- Design Name:
-- Module Name: My_PC_Adder_948282 - Behavioral
-- Project Name:
-- Target Devices:
-- Tool versions:
-- Description:
--
-- Dependencies:
--
-- Revision:
-- Revision 0.01 - File Created
-- Additional Comments:
--
----------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
-- Uncomment the following library declaration if using
-- arithmetic functions with Signed or Unsigned values
--use IEEE.NUMERIC_STD.ALL;
-- Uncomment the following library declaration if instantiating
-- any Xilinx primitives in this code.
--library UNISIM;
--use UNISIM.VComponents.all;
entity My_PC_Adder_948282 is
Port ( Address_In : in STD_LOGIC_VECTOR (9 downto 0);
Address_Next : out STD_LOGIC_VECTOR (9 downto 0));
end My_PC_Adder_948282;
architecture Behavioral of My_PC_Adder_948282 is
component My_Adder_948282 is
Port ( A_element : in STD_LOGIC;
B_element : in STD_LOGIC;
CarryIn : in STD_LOGIC;
CarryOut : out STD_LOGIC;
Result : out STD_LOGIC);
end component;
signal sig1: std_logic;
signal sig2, sig3, sig4, sig5, sig6, sig7, sig8, sig9, sig10: std_logic;
begin
u0: My_Adder_948282 port map (A_element=>Address_In(0), B_element=>'1', CarryIn=>'0', Result=>Address_Next(0), CarryOut=>sig1);
u1: My_Adder_948282 port map (A_element=>Address_In(1), B_element=>'0', CarryIn=>sig1, Result=>Address_Next(1), CarryOut=>sig2);
u2: My_Adder_948282 port map (A_element=>Address_In(2), B_element=>'0', CarryIn=>sig2, Result=>Address_Next(2), CarryOut=>sig3);
u3: My_Adder_948282 port map (A_element=>Address_In(3), B_element=>'0', CarryIn=>sig3, Result=>Address_Next(3), CarryOut=>sig4);
u4: My_Adder_948282 port map (A_element=>Address_In(4), B_element=>'0', CarryIn=>sig4, Result=>Address_Next(4), CarryOut=>sig5);
u5: My_Adder_948282 port map (A_element=>Address_In(5), B_element=>'0', CarryIn=>sig5, Result=>Address_Next(5), CarryOut=>sig6);
u6: My_Adder_948282 port map (A_element=>Address_In(6), B_element=>'0', CarryIn=>sig6, Result=>Address_Next(6), CarryOut=>sig7);
u7: My_Adder_948282 port map (A_element=>Address_In(7), B_element=>'0', CarryIn=>sig7, Result=>Address_Next(7), CarryOut=>sig8);
u8: My_Adder_948282 port map (A_element=>Address_In(8), B_element=>'0', CarryIn=>sig8, Result=>Address_Next(8), CarryOut=>sig9);
u9: My_Adder_948282 port map (A_element=>Address_In(9), B_element=>'0', CarryIn=>sig9, Result=>Address_Next(9), CarryOut=>sig10);
end Behavioral;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
package body badger is
end package body;
package body badger2 is
end package body badger2;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity accumulator is port (
a: in std_logic_vector(3 downto 0);
clk, reset: in std_logic;
accum: out std_logic_vector(3 downto 0)
);
end accumulator;
architecture simple of accumulator is
signal accumL: unsigned(3 downto 0);
begin
accumulate: process (clk, reset) begin
if (reset = '1') then
accumL <= "0000";
elsif (clk'event and clk= '1') then
accumL <= accumL + to_unsigned(a);
end if;
end process;
accum <= std_logic_vector(accumL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity adder is port (
a,b : in std_logic_vector (15 downto 0);
sum: out std_logic_vector (15 downto 0)
);
end adder;
architecture dataflow of adder is
begin
sum <= a + b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity pAdderAttr is
generic(n : integer := 8);
port (a : in std_logic_vector(n - 1 downto 0);
b : in std_logic_vector(n - 1 downto 0);
cin : in std_logic;
sum : out std_logic_vector(n - 1 downto 0);
cout : out std_logic);
end pAdderAttr;
architecture loopDemo of pAdderAttr is
begin
process(a, b, cin)
variable carry: std_logic_vector(sum'length downto 0);
variable localSum: std_logic_vector(sum'high downto 0);
begin
carry(0) := cin;
for i in sum'reverse_range loop
localSum(i) := (a(i) xor b(i)) xor carry(i);
carry(i + 1) := (a(i) and b(i)) or (carry(i) and (a(i) or b(i)));
end loop;
sum <= localSum;
cout <= carry(carry'high - 1);
end process;
end loopDemo;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in unsigned(3 downto 0);
sum: out unsigned(3 downto 0)
);
end adder;
architecture simple of adder is
begin
sum <= a + b;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity asyncLoad is port (
loadVal, d: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLoad;
architecture rtl of asyncLoad is
begin
process (clk, load, loadVal) begin
if (load = '1') then
q <= loadVal;
elsif (clk'event and clk = '1' ) then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity BidirBuf is port (
OE: in std_logic;
input: in std_logic_vector;
output: out std_logic_vector
);
end BidirBuf;
architecture behavioral of BidirBuf is
begin
bidirBuf: process (OE, input) begin
if (OE = '1') then
output <= input;
else
output <= (others => 'Z');
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BidirCnt is port (
OE: in std_logic;
CntEnable: in std_logic;
LdCnt: in std_logic;
Clk: in std_logic;
Rst: in std_logic;
Cnt: inout std_logic_vector(3 downto 0)
);
end BidirCnt;
architecture behavioral of BidirCnt is
component LoadCnt port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end component;
component BidirBuf port (
OE: in std_logic;
input: in std_logic_vector;
output: inout std_logic_vector
);
end component;
signal CntVal: std_logic_vector(3 downto 0);
signal LoadVal: std_logic_vector(3 downto 0);
begin
u1: loadcnt port map (CntEn => CntEnable,
LdCnt => LdCnt,
LdData => LoadVal,
Clk => Clk,
Rst => Rst,
CntVal => CntVal
);
u2: bidirbuf port map (OE => oe,
input => CntVal,
output => Cnt
);
LoadVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity bidirbuffer is port (
input: in std_logic;
enable: in std_logic;
feedback: out std_logic;
output: inout std_logic
);
end bidirbuffer;
architecture structural of bidirbuffer is
begin
u1: bidir port map (ip => input,
oe => enable,
op_fb => feedback,
op => output
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity clkGen is port (
clk: in std_logic;
reset: in std_logic;
ClkDiv2, ClkDiv4,
ClkDiv6,ClkDiv8: out std_logic
);
end clkGen;
architecture behav of clkGen is
subtype numClks is std_logic_vector(1 to 4);
subtype numPatterns is integer range 0 to 11;
type clkTableType is array (numpatterns'low to numPatterns'high) of numClks;
constant clkTable: clkTableType := clkTableType'(
-- ClkDiv8______
-- ClkDiv6_____ |
-- ClkDiv4____ ||
-- ClkDiv2 __ |||
-- ||||
"1111",
"0111",
"1011",
"0001",
"1100",
"0100",
"1010",
"0010",
"1111",
"0001",
"1001",
"0101");
signal index: numPatterns;
begin
lookupTable: process (clk, reset) begin
if reset = '1' then
index <= 0;
elsif (clk'event and clk = '1') then
if index = numPatterns'high then
index <= numPatterns'low;
else
index <= index + 1;
end if;
end if;
end process;
(ClkDiv2,ClkDiv4,ClkDiv6,ClkDiv8) <= clkTable(index);
end behav;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
enable: in std_logic;
reset: in std_logic;
count: buffer unsigned(3 downto 0)
);
end counter;
architecture simple of counter is
begin
increment: process (clk, reset) begin
if reset = '1' then
count <= "0000";
elsif(clk'event and clk = '1') then
if enable = '1' then
count <= count + 1;
else
count <= count;
end if;
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.scaleable.all;
entity count8 is port (
clk: in std_logic;
rst: in std_logic;
count: out std_logic_vector(7 downto 0)
);
end count8;
architecture structural of count8 is
begin
u1: scaleUpCnt port map (clk => clk,
reset => rst,
cnt => count
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 9)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 9);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(3,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(9 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(9 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= to_unsigned(0,10);
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
enable: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
elsif (enable = '1') then
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
load: in std_logic;
data: in std_logic_vector(3 downto 0);
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
if (load = '1') then
countL <= to_unsigned(data);
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity Cnt4Term is port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic
);
end Cnt4Term;
architecture behavioral of Cnt4Term is
signal CntL: unsigned(3 downto 0);
begin
increment: process begin
wait until clk = '1';
CntL <= CntL + 1;
end process;
Cnt <= to_stdlogicvector(CntL);
TermCnt <= '1' when CntL = "1111" else '0';
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity Counter is port (
clock: in std_logic;
Count: out std_logic_vector(3 downto 0)
);
end Counter;
architecture structural of Counter is
component Cnt4Term port (
clk: in std_logic;
Cnt: out std_logic_vector(3 downto 0);
TermCnt: out std_logic);
end component;
begin
u1: Cnt4Term port map (clk => clock,
Cnt => Count,
TermCnt => open
);
end structural;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if(clk'event and clk = '1') then
if (reset = '1') then
countL <= "0000";
else
countL <= countL + 1;
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity convertArith is port (
truncate: out unsigned(3 downto 0);
extend: out unsigned(15 downto 0);
direction: out unsigned(0 to 7)
);
end convertArith;
architecture simple of convertArith is
constant Const: unsigned(7 downto 0) := "00111010";
begin
truncate <= resize(Const, truncate'length);
extend <= resize(Const, extend'length);
direction <= resize(Const, direction'length);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
constant THREE: std_logic_vector(1 downto 0) := "11";
begin
y <= '1' when (a & b = THREE) or (c & d /= THREE) else '0';
end concurrent;
-- incorporates Errata 12.1
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity typeConvert is port (
a: out unsigned(7 downto 0)
);
end typeConvert;
architecture simple of typeConvert is
constant Const: natural := 43;
begin
a <= To_unsigned(Const,8);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk) begin
if (clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(0 to 3)
);
end counter;
architecture simple of counter is
signal countL: unsigned(0 to 3);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "0000";
elsif(clk'event and clk = '1') then
countL <= countL + "001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if reset = '1' then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + 1;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity counter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end counter;
architecture simple of counter is
signal countL: unsigned(3 downto 0);
begin
increment: process (clk, reset) begin
if (reset = '1') then
countL <= "1001";
elsif(clk'event and clk = '1') then
countL <= countL + "0001";
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
use work.decProcs.all;
entity decoder is port (
decIn: in std_logic_vector(1 downto 0);
decOut: out std_logic_vector(3 downto 0)
);
end decoder;
architecture simple of decoder is
begin
DEC2x4(decIn,decOut);
end simple;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
decOut_n: out std_logic_vector(5 downto 0)
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
alias sio_dec_n: std_logic is decOut_n(5);
alias rst_ctrl_rd_n: std_logic is decOut_n(4);
alias atc_stat_rd_n: std_logic is decOut_n(3);
alias mgmt_stat_rd_n: std_logic is decOut_n(2);
alias io_int_stat_rd_n: std_logic is decOut_n(1);
alias int_ctrl_rd_n: std_logic is decOut_n(0);
alias upper: std_logic_vector(2 downto 0) is dev_adr(19 downto 17);
alias CtrlBits: std_logic_vector(16 downto 0) is dev_adr(16 downto 0);
begin
decoder: process (upper, CtrlBits)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case upper is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case CtrlBits is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
sio_dec_n <= '0' when dev_adr (19 downto 17) = SuperIORange else '1';
int_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IntCtrlReg) else '1';
io_int_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = IoIntStatReg) else '1';
rst_ctrl_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = RstCtrlReg) else '1';
atc_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = AtcStatusReg) else '1';
mgmt_stat_rd_n <= '0' when (dev_adr (19 downto 17) = CtrlRegRange)
and (dev_adr(16 downto 0) = MgmtStatusReg) else '1';
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process (dev_adr, cs0_n)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
case dev_adr(19 downto 17) is
when SuperIoRange =>
sio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
int_ctrl_rd_n <= '0';
when IoIntStatReg =>
io_int_stat_rd_n <= '0';
when RstCtrlReg =>
rst_ctrl_rd_n <= '0';
when AtcStatusReg =>
atc_stat_rd_n <= '0';
when MgmtStatusReg =>
mgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
else
null;
end if;
end process decoder;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
cs0_n: in std_logic;
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
signal Lsio_dec_n: std_logic;
signal Lrst_ctrl_rd_n: std_logic;
signal Latc_stat_rd_n: std_logic;
signal Lmgmt_stat_rd_n: std_logic;
signal Lio_int_stat_rd_n: std_logic;
signal Lint_ctrl_rd_n: std_logic;
begin
decoder: process (dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
Lsio_dec_n <= '1';
Lint_ctrl_rd_n <= '1';
Lio_int_stat_rd_n <= '1';
Lrst_ctrl_rd_n <= '1';
Latc_stat_rd_n <= '1';
Lmgmt_stat_rd_n <= '1';
case dev_adr(19 downto 17) is
when SuperIoRange =>
Lsio_dec_n <= '0';
when CtrlRegRange =>
case dev_adr(16 downto 0) is
when IntCtrlReg =>
Lint_ctrl_rd_n <= '0';
when IoIntStatReg =>
Lio_int_stat_rd_n <= '0';
when RstCtrlReg =>
Lrst_ctrl_rd_n <= '0';
when AtcStatusReg =>
Latc_stat_rd_n <= '0';
when MgmtStatusReg =>
Lmgmt_stat_rd_n <= '0';
when others =>
null;
end case;
when others =>
null;
end case;
end process decoder;
qualify: process (cs0_n) begin
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if (cs0_n = '0') then
sio_dec_n <= Lsio_dec_n;
int_ctrl_rd_n <= Lint_ctrl_rd_n;
io_int_stat_rd_n <= Lio_int_stat_rd_n;
rst_ctrl_rd_n <= Lrst_ctrl_rd_n;
atc_stat_rd_n <= Latc_stat_rd_n;
mgmt_stat_rd_n <= Lmgmt_stat_rd_n;
else
null;
end if;
end process qualify;
end synthesis;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n: out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
decoder: process ( dev_adr)
begin
-- Set defaults for outputs - for synthesis reasons.
sio_dec_n <= '1';
int_ctrl_rd_n <= '1';
io_int_stat_rd_n <= '1';
rst_ctrl_rd_n <= '1';
atc_stat_rd_n <= '1';
mgmt_stat_rd_n <= '1';
if dev_adr(19 downto 17) = SuperIOrange then
sio_dec_n <= '0';
elsif dev_adr(19 downto 17) = CtrlRegrange then
if dev_adr(16 downto 0) = IntCtrlReg then
int_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0)= IoIntStatReg then
io_int_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = RstCtrlReg then
rst_ctrl_rd_n <= '0';
elsif dev_adr(16 downto 0) = AtcStatusReg then
atc_stat_rd_n <= '0';
elsif dev_adr(16 downto 0) = MgmtStatusReg then
mgmt_stat_rd_n <= '0';
else
null;
end if;
else
null;
end if;
end process decoder;
end synthesis;
library IEEE;
use IEEE.std_logic_1164.all;
package decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
);
end decProcs;
package body decProcs is
procedure DEC2x4 (inputs : in std_logic_vector(1 downto 0);
decode: out std_logic_vector(3 downto 0)
) is
begin
case inputs is
when "11" =>
decode := "1000";
when "10" =>
decode := "0100";
when "01" =>
decode := "0010";
when "00" =>
decode := "0001";
when others =>
decode := "0001";
end case;
end DEC2x4;
end decProcs;
library ieee;
use ieee.std_logic_1164.all;
entity isa_dec is port
(
dev_adr: in std_logic_vector(19 downto 0);
sio_dec_n: out std_logic;
rst_ctrl_rd_n: out std_logic;
atc_stat_rd_n: out std_logic;
mgmt_stat_rd_n: out std_logic;
io_int_stat_rd_n:out std_logic;
int_ctrl_rd_n: out std_logic
);
end isa_dec;
architecture synthesis of isa_dec is
constant CtrlRegRange: std_logic_vector(2 downto 0) := "100";
constant SuperIoRange: std_logic_vector(2 downto 0) := "010";
constant IntCtrlReg: std_logic_vector(16 downto 0) := "00000000000000000";
constant IoIntStatReg: std_logic_vector(16 downto 0) := "00000000000000001";
constant RstCtrlReg: std_logic_vector(16 downto 0) := "00000000000000010";
constant AtcStatusReg: std_logic_vector(16 downto 0) := "00000000000000011";
constant MgmtStatusReg:std_logic_vector(16 downto 0) := "00000000000000100";
begin
with dev_adr(19 downto 17) select
sio_dec_n <= '0' when SuperIORange,
'1' when others;
with dev_adr(19 downto 0) select
int_ctrl_rd_n <= '0' when CtrlRegRange & IntCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
io_int_stat_rd_n <= '0' when CtrlRegRange & IoIntStatReg,
'1' when others;
with dev_adr(19 downto 0) select
rst_ctrl_rd_n <= '0' when CtrlRegRange & RstCtrlReg,
'1' when others;
with dev_adr(19 downto 0) select
atc_stat_rd_n <= '0' when CtrlRegRange & AtcStatusReg,
'1' when others;
with dev_adr(19 downto 0) select
mgmt_stat_rd_n <= '0' when CtrlRegRange & MgmtStatusReg,
'1' when others;
end synthesis;
-- Incorporates Errata 5.1 and 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal delayCnt, pulseCnt: unsigned(7 downto 0);
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
begin
delayReg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadLength = '1' then -- changed loadLength to loadDelay (Errata 5.1)
pulseCntVal <= unsigned(data);
end if;
end if;
end process;
pulseDelay: process (clk, reset) begin
if (reset = '1') then
delayCnt <= "11111111";
elsif(clk'event and clk = '1') then
if (loadDelay = '1' or loadLength = '1' or endPulse = '1') then -- changed startPulse to endPulse (Errata 5.1)
delayCnt <= delayCntVal;
elsif endPulse = '1' then
delayCnt <= delayCnt - 1;
end if;
end if;
end process;
startPulse <= '1' when delayCnt = "00000000" else '0';
pulseLength: process (clk, reset) begin
if (reset = '1') then
pulseCnt <= "11111111";
elsif (clk'event and clk = '1') then
if (loadLength = '1') then
pulseCnt <= pulseCntVal;
elsif (startPulse = '1' and endPulse = '1') then
pulseCnt <= pulseCntVal;
elsif (endPulse = '1') then
pulseCnt <= pulseCnt;
else
pulseCnt <= pulseCnt - 1;
end if;
end if;
end process;
endPulse <= '1' when pulseCnt = "00000000" else '0';
pulseOutput: process (clk, reset) begin
if (reset = '1') then
pulse <= '0';
elsif (clk'event and clk = '1') then
if (startPulse = '1') then
pulse <= '1';
elsif (endPulse = '1') then
pulse <= '0';
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst : in std_logic;
q: out std_logic;
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, a,b,c) begin
if ((a = '1' and b = '1') or c = '1') then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
a,b,c : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
signal localRst: std_logic;
begin
localRst <= '1' when (( a = '1' and b = '1') or c = '1') else '0';
process (clk, localRst) begin
if localRst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
arst: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q <= '0';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
aset : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, aset) begin
if aset = '1' then
q <= '1';
elsif clk'event and clk = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
arst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk, arst) begin
if arst = '1' then
q1 <= '0';
q2 <= '1';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
wait on clk;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
envector: in std_logic_vector(7 downto 0);
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if envector = "10010111" then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if en = '1' then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (prst = '1') then
q <= '1';
elsif (rst = '1') then
q <= '0';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity flipFlop is port (
clock, input: in std_logic;
ffOut: out std_logic
);
end flipFlop;
architecture simple of flipFlop is
procedure dff (signal clk: in std_logic;
signal d: in std_logic;
signal q: out std_logic
) is
begin
if clk'event and clk = '1' then
q <= d;
end if;
end procedure dff;
begin
dff(clock, input, ffOut);
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
end: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until rising_edge(clk);
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1, d2: in std_logic;
clk: in std_logic;
srst : in std_logic;
q1, q2: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q1 <= '0';
q2 <= '1';
else
q1 <= d1;
q2 <= d2;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe_sr is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
rst,prst: in std_logic;
q: out std_logic
);
end struct_dffe_sr;
use work.primitive.all;
architecture instance of struct_dffe_sr is
begin
ff: dffe_sr port map (
d => d,
clk => clk,
en => en,
rst => rst,
prst => prst,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
srst : in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
if clk'event and clk = '1' then
if srst = '1' then
q <= '0';
else
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dffe is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dffe;
use work.primitive.all;
architecture instance of struct_dffe is
begin
ff: dffe port map (
d => d,
clk => clk,
en => en,
q => q
);
end instance;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity dffTri is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end dffTri;
architecture parameterize of dffTri is
type tribufType is record
ip: std_logic;
oe: std_logic;
op: std_logic;
end record;
type tribufArrayType is array (integer range <>) of tribufType;
signal tri: tribufArrayType(size - 1 downto 0);
begin
g0: for i in 0 to size - 1 generate
u1: DFFE port map (data(i), tri(i).ip, ff_enable, clock);
end generate;
g1: for i in 0 to size - 1 generate
u2: TRIBUF port map (tri(i).ip, tri(i).oe, tri(i).op);
tri(i).oe <= op_enable;
qout(i) <= tri(i).op;
end generate;
end parameterize;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
en: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic bus
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
signal qLocal: std_logic;
begin
qLocal <= d when en = '1' else qLocal;
q <= qLocal;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en, d) begin
if en = '1' then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity struct_dlatch is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end struct_dlatch;
use work.primitive.all;
architecture instance of struct_dlatch is
begin
latch: dlatchh port map (
d => d,
en => en,
q => q
);
end instance;
-- Incorporates Errata 5.4
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity downCounter is port (
clk: in std_logic;
reset: in std_logic;
count: out std_logic_vector(3 downto 0)
);
end downCounter;
architecture simple of downCounter is
signal countL: unsigned(3 downto 0);
signal termCnt: std_logic;
begin
decrement: process (clk, reset) begin
if (reset = '1') then
countL <= "1011"; -- Reset to 11
termCnt <= '1';
elsif(clk'event and clk = '1') then
if (termCnt = '1') then
countL <= "1011"; -- Count rolls over to 11
else
countL <= countL - 1;
end if;
if (countL = "0001") then -- Terminal count decoded 1 cycle earlier
termCnt <= '1';
else
termCnt <= '0';
end if;
end if;
end process;
count <= std_logic_vector(countL);
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity compareDC is port (
addressBus: in std_logic_vector(31 downto 0);
addressHit: out std_logic
);
end compareDC;
architecture wontWork of compareDC is
begin
compare: process(addressBus) begin
if (addressBus = "011110101011--------------------") then
addressHit <= '1';
else
addressHit <= '0';
end if;
end process compare;
end wontWork;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
encode: process (invec) begin
case invec is
when "00000001" =>
enc_out <= "000";
when "00000010" =>
enc_out <= "001";
when "00000100" =>
enc_out <= "010";
when "00001000" =>
enc_out <= "011";
when "00010000" =>
enc_out <= "100";
when "00100000" =>
enc_out <= "101";
when "01000000" =>
enc_out <= "110";
when "10000000" =>
enc_out <= "111";
when others =>
enc_out <= "000";
end case;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec:in std_logic_vector(7 downto 0);
enc_out:out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
process (invec)
begin
if invec(7) = '1' then
enc_out <= "111";
elsif invec(6) = '1' then
enc_out <= "110";
elsif invec(5) = '1' then
enc_out <= "101";
elsif invec(4) = '1' then
enc_out <= "100";
elsif invec(3) = '1' then
enc_out <= "011";
elsif invec(2) = '1' then
enc_out <= "010";
elsif invec(1) = '1' then
enc_out <= "001";
elsif invec(0) = '1' then
enc_out <= "000";
else
enc_out <= "000";
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity encoder is
port (invec: in std_logic_vector(7 downto 0);
enc_out: out std_logic_vector(2 downto 0)
);
end encoder;
architecture rtl of encoder is
begin
enc_out <= "111" when invec(7) = '1' else
"110" when invec(6) = '1' else
"101" when invec(5) = '1' else
"100" when invec(4) = '1' else
"011" when invec(3) = '1' else
"010" when invec(2) = '1' else
"001" when invec(1) = '1' else
"000" when invec(0) = '1' else
"000";
end rtl;
-- includes Errata 5.2
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all; -- errata 5.2
entity compare is port (
ina: in std_logic_vector (3 downto 0);
inb: in std_logic_vector (2 downto 0);
equal: out std_logic
);
end compare;
architecture simple of compare is
begin
equalProc: process (ina, inb) begin
if (ina = inb ) then
equal <= '1';
else
equal <= '0';
end if;
end process;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture behavioral of LogicFcn is
begin
fcn: process (A,B,C) begin
if (A = '0' and B = '0') then
Y <= '1';
elsif C = '1' then
Y <= '1';
else
Y <= '0';
end if;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture dataflow of LogicFcn is
begin
Y <= '1' when (A = '0' AND B = '0') OR
(C = '1')
else '0';
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity LogicFcn is port (
A: in std_logic;
B: in std_logic;
C: in std_logic;
Y: out std_logic
);
end LogicFcn;
architecture structural of LogicFcn is
signal notA, notB, andSignal: std_logic;
begin
i1: inverter port map (i => A,
o => notA);
i2: inverter port map (i => B,
o => notB);
a1: and2 port map (i1 => notA,
i2 => notB,
y => andSignal);
o1: or2 port map (i1 => andSignal,
i2 => C,
y => Y);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is port (
D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
constant tCQ: time := 8 ns;
constant tS: time := 4 ns;
constant tH: time := 3 ns;
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process (clk) begin
wait until clk = '1';
q <= d;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d: in std_logic;
clk: in std_logic;
q: out std_logic
);
end DFF;
architecture rtl of DFF is
begin
process begin
wait until clk = '1';
q <= d;
wait on clk;
end process;
end rtl;
configuration SimpleGatesCfg of FEWGATES is
for structural
for all: AND2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
configuration SimpleGatesCfg of FEWGATES is
for structural
for u1: and2
use entity work.and2(rtl);
end for;
for u2: and2
use entity work.and2(rtl);
end for;
for u3: inverter
use entity work.inverter(rtl);
end for;
for u4: or2
use entity work.or2(rtl);
end for;
end for;
end SimpleGatesCfg;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.and2;
use work.or2;
use work.inverter;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
-- Configution specifications
for all: and2 use entity work.and2(rtl);
for u3: inverter use entity work.inverter(rtl);
for u4: or2 use entity work.or2(rtl);
begin
u1: and2 port map (i1 => a, i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c, i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b, i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
use work.GatesPkg.all;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture concurrent of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
a_and_b <= '1' when a = '1' and b = '1' else '0';
c_and_d <= '1' when c = '1' and d = '1' else '0';
not_c_and_d <= not c_and_d;
y <= '1' when a_and_b = '1' or not_c_and_d = '1' else '0';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
package GatesPkg is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
end GatesPkg;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 =>c,
i2 => d,
y => c_and_d
);
u3: inverter port map (a => c_and_d,
y => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity FEWGATES is port (
a,b,c,d: in std_logic;
y: out std_logic
);
end FEWGATES;
architecture structural of FEWGATES is
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
signal a_and_b, c_and_d, not_c_and_d: std_logic;
begin
u1: and2 port map (i1 => a ,
i2 => b,
y => a_and_b
);
u2: and2 port map (i1 => c,
i2 => d,
y => c_and_d
);
u3: inverter port map (i => c_and_d,
o => not_c_and_d);
u4: or2 port map (i1 => a_and_b,
i2 => not_c_and_d,
y => y
);
end structural;
library IEEE;
use IEEE.std_logic_1164.all;
use work.simPrimitives.all;
entity simHierarchy is port (
A, B, Clk: in std_logic;
Y: out std_logic
);
end simHierarchy;
architecture hierarchical of simHierarchy is
signal ADly, BDly, OrGateDly, ClkDly: std_logic;
signal OrGate, FlopOut: std_logic;
begin
ADly <= transport A after 2 ns;
BDly <= transport B after 2 ns;
OrGateDly <= transport OrGate after 1.5 ns;
ClkDly <= transport Clk after 1 ns;
u1: OR2 generic map (tPD => 10 ns)
port map ( I1 => ADly,
I2 => BDly,
Y => OrGate
);
u2: simDFF generic map ( tS => 4 ns,
tH => 3 ns,
tCQ => 8 ns
)
port map ( D => OrGateDly,
Clk => ClkDly,
Q => FlopOut
);
Y <= transport FlopOut after 2 ns;
end hierarchical;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
--------------------------------------------------------------------------------
--| File name : $RCSfile: io1164.vhd $
--| Library : SUPPORT
--| Revision : $Revision: 1.1 $
--| Author(s) : Vantage Analysis Systems, Inc; Des Young
--| Integration : Des Young
--| Creation : Nov 1995
--| Status : $State: Exp $
--|
--| Purpose : IO routines for std_logic_1164.
--| Assumptions : Numbers use radixed character set with no prefix.
--| Limitations : Does not read VHDL pound-radixed numbers.
--| Known Errors: none
--|
--| Description:
--| This is a modified library. The source is basically that donated by
--| Vantage to libutil. Des Young removed std_ulogic_vector support (to
--| conform to synthesizable libraries), and added read_oct/hex to integer.
--|
--| =======================================================================
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights
--| reserved. This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package VHDL source
--| Package Name: somelib.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : * Overloads procedures READ and WRITE for STD_LOGIC types
--| in manner consistent with TEXTIO package.
--| * Provides procedures to read and write logic values as
--| binary, octal, or hexadecimal values ('X' as appropriate).
--| These should be particularly useful for models
--| to read in stimulus as 0/1/x or octal or hex.
--| Subprograms :
--| Notes :
--| History : 1. Donated to libutil by Dave Bernstein 15 Jun 94
--| 2. Removed all std_ulogic_vector support, Des Young, 14 Nov 95
--| (This is because that type is not supported for synthesis).
--| 3. Added read_oct/hex to integer, Des Young, 20 Nov 95
--|
--| =======================================================================
--| Extra routines by Des Young, [email protected]. 1995. GNU copyright.
--| =======================================================================
--|
--------------------------------------------------------------------------------
library ieee;
package io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- import std_logic package
use ieee.std_logic_1164.all;
-- import textio package
use std.textio.all;
--
-- the READ and WRITE procedures act similarly to the procedures in the
-- STD.TEXTIO package. for each type, there are two read procedures and
-- one write procedure for converting between character and internal
-- representations of values. each value is represented as the string of
-- characters that you would use in VHDL code. (remember that apostrophes
-- and quotation marks are not used.) input is case-insensitive. output
-- is in upper case. see the following LRM sections for more information:
--
-- 2.3 - Subprogram Overloading
-- 3.3 - Access Types (STD.TEXTIO.LINE is an access type)
-- 7.3.6 - Allocators (allocators create access values)
-- 14.3 - Package TEXTIO
--
-- Note that the procedures for std_ulogic will match calls with the value
-- parameter of type std_logic.
--
-- declare READ procedures to overload like in TEXTIO
--
procedure read(l: inout line; value: out std_ulogic ; good: out boolean);
procedure read(l: inout line; value: out std_ulogic );
procedure read(l: inout line; value: out std_logic_vector ; good: out boolean);
procedure read(l: inout line; value: out std_logic_vector );
--
-- declare WRITE procedures to overload like in TEXTIO
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 );
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 );
--
-- declare procedures to convert between logic values and octal
-- or hexadecimal ('X' where appropriate).
--
-- octal / std_logic_vector
procedure read_oct (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_oct (l : inout line ;
value : out std_logic_vector );
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- hexadecimal / std_logic_vector
procedure read_hex (l : inout line ;
value : out std_logic_vector ;
good : out boolean );
procedure read_hex (l : inout line ;
value : out std_logic_vector );
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified : in side := right;
field : in width := 0 );
-- read a number into an integer
procedure read_oct(l : inout line;
value : out integer;
good : out boolean);
procedure read_oct(l : inout line;
value : out integer);
procedure read_hex(l : inout line;
value : out integer;
good : out boolean);
procedure read_hex(l : inout line;
value : out integer);
end io1164;
--------------------------------------------------------------------------------
--| Copyright (c) 1992-1994 Vantage Analysis Systems, Inc., all rights reserved
--| This package is provided by Vantage Analysis Systems.
--| The package may not be sold without the express written consent of
--| Vantage Analysis Systems, Inc.
--|
--| The VHDL for this package may be copied and/or distributed as long as
--| this copyright notice is retained in the source and any modifications
--| are clearly marked in the History: list.
--|
--| Title : IO1164 package body VHDL source
--| Package Name: VANTAGE_LOGIC.IO1164
--| File Name : io1164.vhdl
--| Author(s) : dbb
--| Purpose : source for IO1164 package body
--| Subprograms :
--| Notes : see package declaration
--| History : see package declaration
--------------------------------------------------------------------------------
package body io1164 is
--$ !VANTAGE_METACOMMENTS_ON
--$ !VANTAGE_DNA_ON
-- define lowercase conversion of characters for canonical comparison
type char2char_t is array (character'low to character'high) of character;
constant lowcase: char2char_t := (
nul, soh, stx, etx, eot, enq, ack, bel,
bs, ht, lf, vt, ff, cr, so, si,
dle, dc1, dc2, dc3, dc4, nak, syn, etb,
can, em, sub, esc, fsp, gsp, rsp, usp,
' ', '!', '"', '#', '$', '%', '&', ''',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '[', '\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g',
'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o',
'p', 'q', 'r', 's', 't', 'u', 'v', 'w',
'x', 'y', 'z', '{', '|', '}', '~', del);
-- define conversions between various types
-- logic -> character
type f_logic_to_character_t is
array (std_ulogic'low to std_ulogic'high) of character;
constant f_logic_to_character : f_logic_to_character_t :=
(
'U' => 'U',
'X' => 'X',
'0' => '0',
'1' => '1',
'Z' => 'Z',
'W' => 'W',
'L' => 'L',
'H' => 'H',
'-' => '-'
);
-- character, integer, logic
constant x_charcode : integer := -1;
constant maxoct_charcode: integer := 7;
constant maxhex_charcode: integer := 15;
constant bad_charcode : integer := integer'left;
type digit2int_t is
array ( character'low to character'high ) of integer;
constant octdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7,
'X' | 'x' => x_charcode, others => bad_charcode );
constant hexdigit2int: digit2int_t := (
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4,
'5' => 5, '6' => 6, '7' => 7, '8' => 8, '9' => 9,
'A' | 'a' => 10, 'B' | 'b' => 11, 'C' | 'c' => 12,
'D' | 'd' => 13, 'E' | 'e' => 14, 'F' | 'f' => 15,
'X' | 'x' => x_charcode, others => bad_charcode );
constant oct_bits_per_digit: integer := 3;
constant hex_bits_per_digit: integer := 4;
type int2octdigit_t is
array ( 0 to maxoct_charcode ) of character;
constant int2octdigit: int2octdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7' );
type int2hexdigit_t is
array ( 0 to maxhex_charcode ) of character;
constant int2hexdigit: int2hexdigit_t :=
( 0 => '0', 1 => '1', 2 => '2', 3 => '3',
4 => '4', 5 => '5', 6 => '6', 7 => '7',
8 => '8', 9 => '9', 10 => 'A', 11 => 'B',
12 => 'C', 13 => 'D', 14 => 'E', 15 => 'F' );
type oct_logic_vector_t is
array(1 to oct_bits_per_digit) of std_ulogic;
type octint2logic_t is
array (x_charcode to maxoct_charcode) of oct_logic_vector_t;
constant octint2logic : octint2logic_t := (
( 'X', 'X', 'X' ),
( '0', '0', '0' ),
( '0', '0', '1' ),
( '0', '1', '0' ),
( '0', '1', '1' ),
( '1', '0', '0' ),
( '1', '0', '1' ),
( '1', '1', '0' ),
( '1', '1', '1' )
);
type hex_logic_vector_t is
array(1 to hex_bits_per_digit) of std_ulogic;
type hexint2logic_t is
array (x_charcode to maxhex_charcode) of hex_logic_vector_t;
constant hexint2logic : hexint2logic_t := (
( 'X', 'X', 'X', 'X' ),
( '0', '0', '0', '0' ),
( '0', '0', '0', '1' ),
( '0', '0', '1', '0' ),
( '0', '0', '1', '1' ),
( '0', '1', '0', '0' ),
( '0', '1', '0', '1' ),
( '0', '1', '1', '0' ),
( '0', '1', '1', '1' ),
( '1', '0', '0', '0' ),
( '1', '0', '0', '1' ),
( '1', '0', '1', '0' ),
( '1', '0', '1', '1' ),
( '1', '1', '0', '0' ),
( '1', '1', '0', '1' ),
( '1', '1', '1', '0' ),
( '1', '1', '1', '1' )
);
----------------------------------------------------------------------------
-- READ procedure bodies
--
-- The strategy for duplicating TEXTIO's overloading of procedures
-- with and without GOOD parameters is to put all the logic in the
-- version with the GOOD parameter and to have the version without
-- GOOD approximate a runtime error by use of an assertion.
--
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure read( l: inout line; value: out std_ulogic; good : out boolean ) is
variable c : character; -- char read while looping
variable m : line; -- safe copy of L
variable success: boolean := false; -- readable version of GOOD
variable done : boolean := false; -- flag to say done reading chars
begin
--
-- algorithm:
--
-- if there are characters in the line
-- save a copy of the line
-- get the next character
-- if got one
-- set value
-- if all ok
-- free temp copy
-- else
-- free passed in line
-- assign copy back to line
-- set GOOD
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- grab the next character
read( l, c, success );
-- if read ok
if success then
--
-- an issue here is whether lower-case values should be accepted or not
--
-- determine the value
case c is
when 'U' | 'u' => value := 'U';
when 'X' | 'x' => value := 'X';
when '0' => value := '0';
when '1' => value := '1';
when 'Z' | 'z' => value := 'Z';
when 'W' | 'w' => value := 'W';
when 'L' | 'l' => value := 'L';
when 'H' | 'h' => value := 'H';
when '-' => value := '-';
when others => success := false;
end case;
end if;
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
end if; -- non null access, non empty string
-- set output parameter
good := success;
end read;
procedure read( l: inout line; value: out std_ulogic ) is
variable success: boolean; -- internal good flag
begin
read( l, value, success ); -- use safe version
assert success
report "IO1164.READ: Unable to read STD_ULOGIC value."
severity error;
end read;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure read(l : inout line ;
value: out std_logic_vector;
good : out boolean ) is
variable m : line ; -- saved copy of L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- value for one array element
variable c : character ; -- read a character
begin
--
-- algorithm:
--
-- this procedure strips off leading whitespace, and then calls the
-- READ procedure for each single logic value element in the output
-- array.
--
-- only operate on lines that contain characters
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save a copy of string in case read fails
m := new string'( l.all );
-- loop for each element in output array
for i in value'range loop
-- prohibit internal blanks
if i /= value'left then
if l.all'length = 0 then
success := false;
exit;
end if;
c := l.all(l.all'left);
if c = ' ' or c = ht then
success := false;
exit;
end if;
end if;
-- read the next logic value
read( l, logic_value, success );
-- stuff the value in if ok, else bail out
if success then
value( i ) := logic_value;
else
exit;
end if;
end loop; -- each element in output array
-- free working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
elsif ( value'length /= 0 ) then
-- string is empty but the return array has 1+ elements
success := false;
end if;
-- set output parameter
good := success;
end read;
procedure read(l: inout line; value: out std_logic_vector ) is
variable success: boolean;
begin
read( l, value, success );
assert success
report "IO1164.READ: Unable to read T_WLOGIC_VECTOR value."
severity error;
end read;
----------------------------------------------------------------------------
-- WRITE procedure bodies
----------------------------------------------------------------------------
--
-- std_ulogic
-- note: compatible with std_logic
--
procedure write(l : inout line ;
value : in std_ulogic ;
justified: in side := right;
field : in width := 0 ) is
begin
--
-- algorithm:
--
-- just write out the string associated with the enumerated
-- value.
--
case value is
when 'U' => write( l, character'('U'), justified, field );
when 'X' => write( l, character'('X'), justified, field );
when '0' => write( l, character'('0'), justified, field );
when '1' => write( l, character'('1'), justified, field );
when 'Z' => write( l, character'('Z'), justified, field );
when 'W' => write( l, character'('W'), justified, field );
when 'L' => write( l, character'('L'), justified, field );
when 'H' => write( l, character'('H'), justified, field );
when '-' => write( l, character'('-'), justified, field );
end case;
end write;
--
-- std_logic_vector
-- note: NOT compatible with std_ulogic_vector
--
procedure write(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m: line; -- build up intermediate string
begin
--
-- algorithm:
--
-- for each value in array
-- add string representing value to intermediate string
-- write intermediate string to line parameter
-- free intermediate string
--
-- for each value in array
for i in value'range loop
-- add string representing value to intermediate string
write( m, value( i ) );
end loop;
-- write intermediate string to line parameter
write( l, m.all, justified, field );
-- free intermediate string
deallocate( m );
end write;
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
-- procedure bodies for octal and hexadecimal read and write
----------------------------------------------------------------------------
--
-- std_logic_vector/octal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_oct(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable oct_logic_vector: oct_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem oct_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := octdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
oct_logic_vector := octint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := oct_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = oct_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := octdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
oct_logic_vector := octint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_oct;
procedure read_oct(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_oct;
procedure write_oct(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem oct_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_OCT: VALUE'Length is not a multiple of 3."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / oct_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = oct_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2octdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_oct;
--
-- std_logic_vector/hexadecimal
-- note: NOT compatible with std_ulogic_vector
--
procedure read_hex(l : inout line ;
value : out std_logic_vector;
good : out boolean ) is
variable m : line ; -- safe L
variable success : boolean := true; -- readable GOOD
variable logic_value : std_logic ; -- elem value
variable c : character ; -- char read
variable charcode : integer ; -- char->int
variable hex_logic_vector: hex_logic_vector_t ; -- for 1 digit
variable bitpos : integer ; -- in state vec.
begin
--
-- algorithm:
--
-- skip over leading blanks, then read a digit
-- and do a conversion into a logic value
-- for each element in array
--
-- make sure logic array is right size to read this base
success := ( ( value'length rem hex_bits_per_digit ) = 0 );
if success then
-- only operate on non-empty strings
if ( ( l /= null ) and ( l.all'length /= 0 ) ) then
-- save old copy of string in case read fails
m := new string'( l.all );
-- pick off leading white space and get first significant char
c := ' ';
while success and ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = ht ) ) loop
read( l, c, success );
end loop;
-- turn character into integer
charcode := hexdigit2int( c );
-- not doing any bits yet
bitpos := 0;
-- check for bad first character
if charcode = bad_charcode then
success := false;
else
-- loop through each value in array
hex_logic_vector := hexint2logic( charcode );
for i in value'range loop
-- doing the next bit
bitpos := bitpos + 1;
-- stick the value in
value( i ) := hex_logic_vector( bitpos );
-- read the next character if we're not at array end
if ( bitpos = hex_bits_per_digit ) and ( i /= value'right ) then
read( l, c, success );
if not success then
exit;
end if;
-- turn character into integer
charcode := hexdigit2int( c );
-- check for bad char
if charcode = bad_charcode then
success := false;
exit;
end if;
-- reset bit position
bitpos := 0;
-- turn character code into state array
hex_logic_vector := hexint2logic( charcode );
end if;
end loop; -- each index in return array
end if; -- if bad first character
-- clean up working storage
if success then
deallocate( m );
else
deallocate( l );
l := m;
end if;
-- no characters to read for return array that isn't null slice
elsif ( value'length /= 0 ) then
success := false;
end if; -- non null access, non empty string
end if;
-- set out parameter of success
good := success;
end read_hex;
procedure read_hex(l : inout line ;
value : out std_logic_vector) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read T_LOGIC_VECTOR value."
severity error;
end read_hex;
procedure write_hex(l : inout line ;
value : in std_logic_vector ;
justified: in side := right;
field : in width := 0 ) is
variable m : line ; -- safe copy of L
variable goodlength : boolean ; -- array is ok len for this base
variable isx : boolean ; -- an X in this digit
variable integer_value: integer ; -- accumulate integer value
variable c : character; -- character read
variable charpos : integer ; -- index string being contructed
variable bitpos : integer ; -- bit index inside digit
begin
--
-- algorithm:
--
-- make sure this array can be written in this base
-- create a string to place intermediate results
-- initialize counters and flags to beginning of string
-- for each item in array
-- note unknown, else accumulate logic into integer
-- if at this digit's last bit
-- stuff digit just computed into intermediate result
-- reset flags and counters except for charpos
-- write intermediate result into line
-- free work storage
--
-- make sure this array can be written in this base
goodlength := ( ( value'length rem hex_bits_per_digit ) = 0 );
assert goodlength
report "IO1164.WRITE_HEX: VALUE'Length is not a multiple of 4."
severity error;
if goodlength then
-- create a string to place intermediate results
m := new string(1 to ( value'length / hex_bits_per_digit ) );
-- initialize counters and flags to beginning of string
charpos := 0;
bitpos := 0;
isx := false;
integer_value := 0;
-- for each item in array
for i in value'range loop
-- note unknown, else accumulate logic into integer
case value(i) is
when '0' | 'L' =>
integer_value := integer_value * 2;
when '1' | 'H' =>
integer_value := ( integer_value * 2 ) + 1;
when others =>
isx := true;
end case;
-- see if we've done this digit's last bit
bitpos := bitpos + 1;
if bitpos = hex_bits_per_digit then
-- stuff the digit just computed into the intermediate result
charpos := charpos + 1;
if isx then
m.all(charpos) := 'X';
else
m.all(charpos) := int2hexdigit( integer_value );
end if;
-- reset flags and counters except for location in string being constructed
bitpos := 0;
isx := false;
integer_value := 0;
end if;
end loop;
-- write intermediate result into line
write( l, m.all, justified, field );
-- free work storage
deallocate( m );
end if;
end write_hex;
------------------------------------------------------------------------------
------------------------------------
-- Read octal/hex numbers to integer
------------------------------------
--
-- Read octal to integer
--
procedure read_oct(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := octdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := octdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 8) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_oct;
-- simple version
procedure read_oct(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_oct( l, value, success ); -- use safe version
assert success
report "IO1164.READ_OCT: Unable to read octal integer value."
severity error;
end read_oct;
--
-- Read hex to integer
--
procedure read_hex(l : inout line;
value : out integer;
good : out boolean) is
variable pos : integer;
variable digit : integer;
variable result : integer := 0;
variable success : boolean := true;
variable c : character;
variable old_l : line := l;
begin
-- algorithm:
--
-- skip leading white space, read digit, convert
-- into integer
--
if (l /= NULL) then
-- set pos to start of actual number by skipping white space
pos := l'LEFT;
c := l(pos);
while ( l.all'length > 0 ) and ( ( c = ' ' ) or ( c = HT ) ) loop
pos := pos + 1;
c := l(pos);
end loop;
-- check for start of valid number
digit := hexdigit2int(l(pos));
if ((digit = bad_charcode) or (digit = x_charcode)) then
good := FALSE;
return;
else
-- calculate integer value
for i in pos to l'RIGHT loop
digit := hexdigit2int(l(pos));
exit when (digit = bad_charcode) or (digit = x_charcode);
result := (result * 16) + digit;
pos := pos + 1;
end loop;
value := result;
-- shrink line
if (pos > 1) then
l := new string'(old_l(pos to old_l'HIGH));
deallocate(old_l);
end if;
good := TRUE;
return;
end if;
else
good := FALSE;
end if;
end read_hex;
-- simple version
procedure read_hex(l : inout line;
value : out integer) is
variable success: boolean; -- internal good flag
begin
read_hex( l, value, success ); -- use safe version
assert success
report "IO1164.READ_HEX: Unable to read hex integer value."
severity error;
end read_hex;
end io1164;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity asyncLdCnt is port (
loadVal: in std_logic_vector(3 downto 0);
clk, load: in std_logic;
q: out std_logic_vector(3 downto 0)
);
end asyncLdCnt;
architecture rtl of asyncLdCnt is
signal qLocal: unsigned(3 downto 0);
begin
process (clk, load, loadVal) begin
if (load = '1') then
qLocal <= to_unsigned(loadVal);
elsif (clk'event and clk = '1' ) then
qLocal <= qLocal + 1;
end if;
end process;
q <= to_stdlogicvector(qLocal);
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity LoadCnt is port (
CntEn: in std_logic;
LdCnt: in std_logic;
LdData: in std_logic_vector(3 downto 0);
Clk: in std_logic;
Rst: in std_logic;
CntVal: out std_logic_vector(3 downto 0)
);
end LoadCnt;
architecture behavioral of LoadCnt is
signal Cnt: std_logic_vector(3 downto 0);
begin
counter: process (Clk, Rst) begin
if Rst = '1' then
Cnt <= (others => '0');
elsif (Clk'event and Clk = '1') then
if (LdCnt = '1') then
Cnt <= LdData;
elsif (CntEn = '1') then
Cnt <= Cnt + 1;
else
Cnt <= Cnt;
end if;
end if;
end process;
CntVal <= Cnt;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
library UTILS;
use UTILS.io1164.all;
use std.textio.all;
entity loadCntTB is
end loadCntTB;
architecture testbench of loadCntTB is
component loadCnt port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end component;
file vectorFile: text is in "vectorfile";
type vectorType is record
data: std_logic_vector(7 downto 0);
load: std_logic;
rst: std_logic;
q: std_logic_vector(7 downto 0);
end record;
signal testVector: vectorType;
signal TestClk: std_logic := '0';
signal Qout: std_logic_vector(7 downto 0);
constant ClkPeriod: time := 100 ns;
for all: loadCnt use entity work.loadcnt(rtl);
begin
-- File reading and stimulus application
readVec: process
variable VectorLine: line;
variable VectorValid: boolean;
variable vRst: std_logic;
variable vLoad: std_logic;
variable vData: std_logic_vector(7 downto 0);
variable vQ: std_logic_vector(7 downto 0);
begin
while not endfile (vectorFile) loop
readline(vectorFile, VectorLine);
read(VectorLine, vRst, good => VectorValid);
next when not VectorValid;
read(VectorLine, vLoad);
read(VectorLine, vData);
read(VectorLine, vQ);
wait for ClkPeriod/4;
testVector.Rst <= vRst;
testVector.Load <= vLoad;
testVector.Data <= vData;
testVector.Q <= vQ;
wait for (ClkPeriod/4) * 3;
end loop;
assert false
report "Simulation complete"
severity note;
wait;
end process;
-- Free running test clock
TestClk <= not TestClk after ClkPeriod/2;
-- Instance of design being tested
u1: loadCnt port map (Data => testVector.Data,
load => testVector.Load,
clk => TestClk,
rst => testVector.Rst,
q => Qout
);
-- Process to verify outputs
verify: process (TestClk)
variable ErrorMsg: line;
begin
if (TestClk'event and TestClk = '0') then
if Qout /= testVector.Q then
write(ErrorMsg, string'("Vector failed "));
write(ErrorMsg, now);
writeline(output, ErrorMsg);
end if;
end if;
end process;
end testbench;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity loadCnt is port (
data: in std_logic_vector (7 downto 0);
load: in std_logic;
clk: in std_logic;
rst: in std_logic;
q: out std_logic_vector (7 downto 0)
);
end loadCnt;
architecture rtl of loadCnt is
signal cnt: std_logic_vector (7 downto 0);
begin
counter: process (clk, rst) begin
if (rst = '1') then
cnt <= (others => '0');
elsif (clk'event and clk = '1') then
if (load = '1') then
cnt <= data;
else
cnt <= cnt + 1;
end if;
end if;
end process;
q <= cnt;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity multiplier is port (
a,b : in std_logic_vector (15 downto 0);
product: out std_logic_vector (31 downto 0)
);
end multiplier;
architecture dataflow of multiplier is
begin
product <= a * b;
end dataflow;
library IEEE;
use IEEE.std_logic_1164.all;
entity mux is port (
A, B, Sel: in std_logic;
Y: out std_logic
);
end mux;
architecture simModel of mux is
-- Delay Constants
constant tPD_A: time := 10 ns;
constant tPD_B: time := 15 ns;
constant tPD_Sel: time := 5 ns;
begin
DelayMux: process (A, B, Sel)
variable localY: std_logic; -- Zero delay place holder for Y
begin
-- Zero delay model
case Sel is
when '0' =>
localY := A;
when others =>
localY := B;
end case;
-- Delay calculation
if (B'event) then
Y <= localY after tPD_B;
elsif (A'event) then
Y <= localY after tPD_A;
else
Y <= localY after tPD_Sel;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
begin
if (a + b = "10011010") then
result <= c;
elsif (a + b = "01011001") then
result <= d;
elsif (a + b = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture concurrent of TRIBUF8 is
begin
op <= ip when oe = '1' else (others => 'Z');
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture concurrent of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end concurrent;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF8 is port (
ip: in std_logic_vector(7 downto 0);
oe: in std_logic;
op: out std_logic_vector(7 downto 0)
);
end TRIBUF8;
architecture sequential of TRIBUF8 is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= (others => 'Z');
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in bit;
oe: in bit;
op: out bit
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= null;
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture sequential of TRIBUF is
begin
enable: process (ip,oe) begin
if (oe = '1') then
op <= ip;
else
op <= 'Z';
end if;
end process;
end sequential;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity tribuffer is port (
input: in std_logic;
enable: in std_logic;
output: out std_logic
);
end tribuffer;
architecture structural of tribuffer is
begin
u1: tribuf port map (ip => input,
oe => enable,
op => output
);
end structural;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
begin
genXOR(0) <= '0';
parTree: for i in 1 to ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
entity oddParityLoop is
generic ( width : integer := 8 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityLoop ;
architecture scaleable of oddParityLoop is
begin
process (ad)
variable loopXor: std_logic;
begin
loopXor := '0';
for i in 0 to width -1 loop
loopXor := loopXor xor ad( i ) ;
end loop ;
oddParity <= loopXor ;
end process;
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is port (
I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after 10 ns;
end simple;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity adder is port (
a,b: in std_logic_vector(3 downto 0);
sum: out std_logic_vector(3 downto 0);
overflow: out std_logic
);
end adder;
architecture concat of adder is
signal localSum: std_logic_vector(4 downto 0);
begin
localSum <= std_logic_vector(unsigned('0' & a) + unsigned('0' & b));
sum <= localSum(3 downto 0);
overflow <= localSum(4);
end concat;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity paramDFF is
generic (size: integer := 8);
port (
data: in std_logic_vector(size - 1 downto 0);
clock: in std_logic;
reset: in std_logic;
ff_enable: in std_logic;
op_enable: in std_logic;
qout: out std_logic_vector(size - 1 downto 0)
);
end paramDFF;
architecture parameterize of paramDFF is
signal reg: std_logic_vector(size - 1 downto 0);
begin
u1: pDFFE generic map (n => size)
port map (d => data,
clk =>clock,
rst => reset,
en => ff_enable,
q => reg
);
u2: pTRIBUF generic map (n => size)
port map (ip => reg,
oe => op_enable,
op => qout
);
end paramterize;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 );
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal genXor: std_logic_vector(ad'range);
signal one: std_logic := '1';
begin
parTree: for i in ad'range generate
g0: if i = 0 generate
x0: xor2 port map (i1 => one,
i2 => one,
y => genXor(0)
);
end generate;
g1: if i > 0 and i <= ad'high generate
x1: xor2 port map (i1 => genXor(i - 1),
i2 => ad(i - 1),
y => genXor(i)
);
end generate;
end generate;
oddParity <= genXor(ad'high) ;
end scaleable ;
library ieee;
use ieee.std_logic_1164.all;
use work.primitive.all;
entity oddParityGen is
generic ( width : integer := 32 ); -- (2 <= width <= 32) and a power of 2
port (ad: in std_logic_vector (width - 1 downto 0);
oddParity : out std_logic ) ;
end oddParityGen;
architecture scaleable of oddParityGen is
signal stage0: std_logic_vector(31 downto 0);
signal stage1: std_logic_vector(15 downto 0);
signal stage2: std_logic_vector(7 downto 0);
signal stage3: std_logic_vector(3 downto 0);
signal stage4: std_logic_vector(1 downto 0);
begin
g4: for i in stage4'range generate
g41: if (ad'length > 2) generate
x4: xor2 port map (stage3(i), stage3(i + stage4'length), stage4(i));
end generate;
end generate;
g3: for i in stage3'range generate
g31: if (ad'length > 4) generate
x3: xor2 port map (stage2(i), stage2(i + stage3'length), stage3(i));
end generate;
end generate;
g2: for i in stage2'range generate
g21: if (ad'length > 8) generate
x2: xor2 port map (stage1(i), stage1(i + stage2'length), stage2(i));
end generate;
end generate;
g1: for i in stage1'range generate
g11: if (ad'length > 16) generate
x1: xor2 port map (stage0(i), stage0(i + stage1'length), stage1(i));
end generate;
end generate;
s1: for i in ad'range generate
s14: if (ad'length = 2) generate
stage4(i) <= ad(i);
end generate;
s13: if (ad'length = 4) generate
stage3(i) <= ad(i);
end generate;
s12: if (ad'length = 8) generate
stage2(i) <= ad(i);
end generate;
s11: if (ad'length = 16) generate
stage1(i) <= ad(i);
end generate;
s10: if (ad'length = 32) generate
stage0(i) <= ad(i);
end generate;
end generate;
genPar: xor2 port map (stage4(0), stage4(1), oddParity);
end scaleable ;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in unsigned(3 downto 0);
power : out unsigned(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
signal inputValInt: integer range 0 to 15;
signal powerL: integer range 0 to 65535;
begin
inputValInt <= to_integer(inputVal);
power <= to_unsigned(powerL,16);
process begin
wait until Clk = '1';
powerL <= Pow(inputValInt,4);
end process;
end behavioral;
package PowerPkg is
component Power port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end component;
end PowerPkg;
use work.bv_math.all;
use work.int_math.all;
use work.PowerPkg.all;
entity Power is port(
Clk : in bit;
inputVal : in bit_vector(0 to 3);
power : out bit_vector(0 to 15) );
end Power;
architecture funky of Power is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
Variable i : integer := 0;
begin
while( i < Exp ) loop
Result := Result * N;
i := i + 1;
end loop;
return( Result );
end Pow;
function RollVal( CntlVal : integer ) return integer is
begin
return( Pow( 2, CntlVal ) + 2 );
end RollVal;
begin
process
begin
wait until Clk = '1';
power <= i2bv(Rollval(bv2I(inputVal)),16);
end process;
end funky;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity priority_encoder is port
(interrupts : in std_logic_vector(7 downto 0);
priority : in std_logic_vector(2 downto 0);
result : out std_logic_vector(2 downto 0)
);
end priority_encoder;
architecture behave of priority_encoder is
begin
process (interrupts)
variable selectIn : integer;
variable LoopCount : integer;
begin
LoopCount := 1;
selectIn := to_integer(to_unsigned(priority));
while (LoopCount <= 7) and (interrupts(selectIn) /= '0') loop
if (selectIn = 0) then
selectIn := 7;
else
selectIn := selectIn - 1;
end if;
LoopCount := LoopCount + 1;
end loop;
result <= std_logic_vector(to_unsigned(selectIn,3));
end process;
end behave;
library IEEE;
use IEEE.std_logic_1164.all;
package primitive is
component DFFE port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end component;
component DFFE_SR port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end component;
component DLATCHH port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end component;
component AND2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component OR2 port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end component;
component INVERTER port (
i: in std_logic;
o: out std_logic
);
end component;
component TRIBUF port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end component;
component BIDIR port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end component;
end package;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE is port (
d: in std_logic;
q: out std_logic;
en: in std_logic;
clk: in std_logic
);
end DFFE;
architecture rtl of DFFE is
begin
process begin
wait until clk = '1';
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFFE_SR is port (
d: in std_logic;
en: in std_logic;
clk: in std_logic;
rst: in std_logic;
prst: in std_logic;
q: out std_logic
);
end DFFE_SR;
architecture rtl of DFFE_SR is
begin
process (clk, rst, prst) begin
if (rst = '1') then
q <= '0';
elsif (prst = '1') then
q <= '1';
elsif (clk'event and clk = '1') then
if (en = '1') then
q <= d;
end if;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity DLATCHH is port (
d: in std_logic;
en: in std_logic;
q: out std_logic
);
end DLATCHH;
architecture rtl of DLATCHH is
begin
process (en) begin
if (en = '1') then
q <= d;
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity AND2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end AND2;
architecture rtl of AND2 is
begin
y <= '1' when i1 = '1' and i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity OR2 is port (
i1: in std_logic;
i2: in std_logic;
y: out std_logic
);
end OR2;
architecture rtl of OR2 is
begin
y <= '1' when i1 = '1' or i2 = '1' else '0';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity INVERTER is port (
i: in std_logic;
o: out std_logic
);
end INVERTER;
architecture rtl of INVERTER is
begin
o <= not i;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity TRIBUF is port (
ip: in std_logic;
oe: in std_logic;
op: out std_logic
);
end TRIBUF;
architecture rtl of TRIBUF is
begin
op <= ip when oe = '1' else 'Z';
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity BIDIR is port (
ip: in std_logic;
oe: in std_logic;
op_fb: out std_logic;
op: inout std_logic
);
end BIDIR;
architecture rtl of BIDIR is
begin
op <= ip when oe = '1' else 'Z';
op_fb <= op;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
subtype fsmType is std_logic_vector(1 downto 0);
constant loadDelayCnt : fsmType := "00";
constant waitDelayEnd : fsmType := "10";
constant loadLengthCnt : fsmType := "11";
constant waitLengthEnd : fsmType := "01";
signal currState, nextState: fsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
-- Assign pulse output
pulse <= currState(0);
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity pulseErr is port
(a: in std_logic;
b: out std_logic
);
end pulseErr;
architecture behavior of pulseErr is
signal c: std_logic;
begin
pulse: process (a,c) begin
b <= c XOR a;
c <= a;
end process;
end behavior;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulse is port (
clk, reset: in std_logic;
loadLength,loadDelay: in std_logic;
data: in std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulse;
architecture rtl of progPulse is
signal downCnt, downCntData: unsigned(7 downto 0);
signal downCntLd, downCntEn: std_logic;
signal delayCntVal, pulseCntVal: unsigned(7 downto 0);
signal startPulse, endPulse: std_logic;
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
begin
delayreg: process (clk, reset) begin
if reset = '1' then
delayCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
delayCntVal <= to_unsigned(data);
end if;
end if;
end process;
lengthReg: process (clk, reset) begin
if reset = '1' then
pulseCntVal <= "11111111";
elsif clk'event and clk = '1' then
if loadDelay = '1' then
pulseCntVal <= to_unsigned(data);
end if;
end if;
end process;
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCnt = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, pulseCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downCntData <= pulseCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downCntData <= pulseCntVal;
pulse <= '0';
end case;
end process outConProc;
downCntr: process (clk,reset) begin
if (reset = '1') then
downCnt <= "00000000";
elsif (clk'event and clk = '1') then
if (downCntLd = '1') then
downCnt <= downCntData;
elsif (downCntEn = '1') then
downCnt <= downCnt - 1;
else
downCnt <= downCnt;
end if;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
type stateVec is array (3 downto 0) of std_logic;
type stateBits is array (progPulseFsmType) of stateVec;
signal loadVal: std_logic;
constant stateTable: stateBits := (
loadDelayCnt => "0010",
waitDelayEnd => "0100",
loadLengthCnt => "0011",
waitLengthEnd => "1101" );
-- ^^^^
-- ||||__ loadVal
-- |||___ downCntLd
-- ||____ downCntEn
-- |_____ pulse
signal currState, nextState: progPulseFsmType;
begin
nextStProc: process (currState, downCnt, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (to_unsigned(downCnt) = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
pulse <= stateTable(currState)(3);
downCntEn <= stateTable(currState)(2);
downCntLd <= stateTable(currState)(1);
loadVal <= stateTable(currState)(0);
downCntData <= delayCntVal when loadVal = '0' else lengthCntVal;
end fsm;
-- Incorporates Errata 6.1
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity progPulseFsm is port (
downCnt: in std_logic_vector(7 downto 0);
delayCntVal: in std_logic_vector(7 downto 0);
lengthCntVal: in std_logic_vector(7 downto 0);
loadLength: in std_logic;
loadDelay: in std_logic;
clk: in std_logic;
reset: in std_logic;
downCntEn: out std_logic;
downCntLd: out std_logic;
downtCntData: out std_logic_vector(7 downto 0);
pulse: out std_logic
);
end progPulseFsm;
architecture fsm of progPulseFsm is
type progPulseFsmType is (loadDelayCnt, waitDelayEnd, loadLengthCnt, waitLengthEnd);
signal currState, nextState: progPulseFsmType;
signal downCntL: unsigned (7 downto 0);
begin
downCntL <= to_unsigned(downCnt); -- convert downCnt to unsigned
nextStProc: process (currState, downCntL, loadDelay, loadLength) begin
case currState is
when loadDelayCnt =>
nextState <= waitDelayEnd;
when waitDelayEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadLengthCnt;
else
nextState <= waitDelayEnd;
end if;
when loadLengthCnt =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
else
nextState <= waitLengthEnd;
end if;
when waitLengthEnd =>
if (loadDelay = '1' or loadLength = '1') then
nextState <= loadDelayCnt;
elsif (downCntL = 0) then
nextState <= loadDelayCnt;
else
nextState <= waitDelayEnd;
end if;
when others =>
null;
end case;
end process nextStProc;
currStProc: process (clk, reset) begin
if (reset = '1') then
currState <= loadDelayCnt;
elsif (clk'event and clk = '1') then
currState <= nextState;
end if;
end process currStProc;
outConProc: process (currState, delayCntVal, lengthCntVal) begin
case currState is
when loadDelayCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
when waitDelayEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= delayCntVal;
pulse <= '0';
when loadLengthCnt =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= lengthCntVal;
pulse <= '1';
when waitLengthEnd =>
downCntEn <= '1';
downCntLd <= '0';
downtCntData <= lengthCntVal;
pulse <= '1';
when others =>
downCntEn <= '0';
downCntLd <= '1';
downtCntData <= delayCntVal;
pulse <= '0';
end case;
end process outConProc;
end fsm;
-- Incorporates errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
use work.specialFunctions.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(unsigned(inputVal)),4),16));
end process;
end behavioral;
-- Incorporate errata 5.4
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= std_logic_vector(to_unsigned(Pow(to_integer(to_unsigned(inputVal)),4),16));
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;
use IEEE.std_logic_unsigned.all;
entity powerOfFour is port(
clk : in std_logic;
inputVal : in std_logic_vector(3 downto 0);
power : out std_logic_vector(15 downto 0)
);
end powerOfFour;
architecture behavioral of powerOfFour is
function Pow( N, Exp : integer ) return integer is
Variable Result : integer := 1;
begin
for i in 1 to Exp loop
Result := Result * N;
end loop;
return( Result );
end Pow;
begin
process begin
wait until Clk = '1';
power <= conv_std_logic_vector(Pow(conv_integer(inputVal),4),16);
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity regFile is port (
clk, rst: in std_logic;
data: in std_logic_vector(31 downto 0);
regSel: in std_logic_vector(1 downto 0);
wrEnable: in std_logic;
regOut: out std_logic_vector(31 downto 0)
);
end regFile;
architecture behavioral of regFile is
subtype reg is std_logic_vector(31 downto 0);
type regArray is array (integer range <>) of reg;
signal registerFile: regArray(0 to 3);
begin
regProc: process (clk, rst)
variable i: integer;
begin
i := 0;
if rst = '1' then
while i <= registerFile'high loop
registerFile(i) <= (others => '0');
i := i + 1;
end loop;
elsif clk'event and clk = '1' then
if (wrEnable = '1') then
case regSel is
when "00" =>
registerFile(0) <= data;
when "01" =>
registerFile(1) <= data;
when "10" =>
registerFile(2) <= data;
when "11" =>
registerFile(3) <= data;
when others =>
null;
end case;
end if;
end if;
end process;
outputs: process(regSel, registerFile) begin
case regSel is
when "00" =>
regOut <= registerFile(0);
when "01" =>
regOut <= registerFile(1);
when "10" =>
regOut <= registerFile(2);
when "11" =>
regOut <= registerFile(3);
when others =>
null;
end case;
end process;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
entity DFF is port (
d1,d2: in std_logic;
q1,q2: out std_logic;
clk: in std_logic;
rst : in std_logic
);
end DFF;
architecture rtl of DFF is
begin
resetLatch: process (clk, rst) begin
if rst = '1' then
q1 <= '0';
elsif clk'event and clk = '1' then
q1 <= d1;
q2 <= d2;
end if;
end process;
end rtl;
library ieee;
use ieee.std_logic_1164.all;
entity resFcnDemo is port (
a, b: in std_logic;
oeA,oeB: in std_logic;
result: out std_logic
);
end resFcnDemo;
architecture multiDriver of resFcnDemo is
begin
result <= a when oeA = '1' else 'Z';
result <= b when oeB = '1' else 'Z';
end multiDriver;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleDFF is port (
data: in std_logic_vector(7 downto 0);
clock: in std_logic;
enable: in std_logic;
qout: out std_logic_vector(7 downto 0)
);
end scaleDFF;
architecture scalable of scaleDFF is
begin
u1: sDFFE port map (d => data,
clk =>clock,
en => enable,
q => qout
);
end scalable;
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
signal la_n, lb_n, lc_n, ld_n, le_n, lf_n, lg_n: std_logic;
signal oe: std_logic;
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
la_n <= '1'; lb_n <= '1';
lc_n <= '1'; ld_n <= '1';
le_n <= '1'; lf_n <= '1';
lg_n <= '1';
case bcdInputs is
when "0000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
when "0001" => lb_n <= '0'; lc_n <= '0';
when "0010" => la_n <= '0'; lb_n <= '0';
ld_n <= '0'; le_n <= '0';
lg_n <= '0';
when "0011" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lg_n <= '0';
when "0100" => lb_n <= '0'; lc_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0101" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "0110" => la_n <= '0'; lc_n <= '0';
ld_n <= '0'; le_n <= '0';
lf_n <= '0'; lg_n <= '0';
when "0111" => la_n <= '0'; lb_n <= '0';
lc_n <= '0';
when "1000" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
le_n <= '0'; lf_n <= '0';
lg_n <= '0';
when "1001" => la_n <= '0'; lb_n <= '0';
lc_n <= '0'; ld_n <= '0';
lf_n <= '0'; lg_n <= '0';
-- All other inputs possibilities are "don't care"
when others => la_n <= 'X'; lb_n <= 'X';
lc_n <= 'X'; ld_n <= 'X';
le_n <= 'X'; lf_n <= 'X';
lg_n <= 'X';
end case;
end process bcd2sevSeg;
-- Disable outputs for all invalid input values
oe <= '1' when (bcdInputs < 10) else '0';
a_n <= la_n when oe = '1' else 'Z';
b_n <= lb_n when oe = '1' else 'Z';
c_n <= lc_n when oe = '1' else 'Z';
d_n <= ld_n when oe = '1' else 'Z';
e_n <= le_n when oe = '1' else 'Z';
f_n <= lf_n when oe = '1' else 'Z';
g_n <= lg_n when oe = '1' else 'Z';
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
entity sevenSegmentTB is
end sevenSegmentTB;
architecture testbench of sevenSegmentTB is
component sevenSegment port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end component;
type vector is record
bcdStimulus: std_logic_vector(3 downto 0);
sevSegOut: std_logic_vector(6 downto 0);
end record;
constant NumVectors: integer:= 17;
constant PropDelay: time := 40 ns;
constant SimLoopDelay: time := 10 ns;
type vectorArray is array (0 to NumVectors - 1) of vector;
constant vectorTable: vectorArray := (
(bcdStimulus => "0000", sevSegOut => "0000001"),
(bcdStimulus => "0001", sevSegOut => "1001111"),
(bcdStimulus => "0010", sevSegOut => "0010010"),
(bcdStimulus => "0011", sevSegOut => "0000110"),
(bcdStimulus => "0100", sevSegOut => "1001100"),
(bcdStimulus => "0101", sevSegOut => "0100100"),
(bcdStimulus => "0110", sevSegOut => "0100000"),
(bcdStimulus => "0111", sevSegOut => "0001111"),
(bcdStimulus => "1000", sevSegOut => "0000000"),
(bcdStimulus => "1001", sevSegOut => "0000100"),
(bcdStimulus => "1010", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1011", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1100", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1101", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1110", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "1111", sevSegOut => "ZZZZZZZ"),
(bcdStimulus => "0000", sevSegOut => "0110110") -- this vector fails
);
for all : sevenSegment use entity work.sevenSegment(behavioral);
signal StimInputs: std_logic_vector(3 downto 0);
signal CaptureOutputs: std_logic_vector(6 downto 0);
begin
u1: sevenSegment port map (bcdInputs => StimInputs,
a_n => CaptureOutputs(6),
b_n => CaptureOutputs(5),
c_n => CaptureOutputs(4),
d_n => CaptureOutputs(3),
e_n => CaptureOutputs(2),
f_n => CaptureOutputs(1),
g_n => CaptureOutputs(0));
LoopStim: process
variable FoundError: boolean := false;
variable TempVector: vector;
variable ErrorMsgLine: line;
begin
for i in vectorTable'range loop
TempVector := vectorTable(i);
StimInputs <= TempVector.bcdStimulus;
wait for PropDelay;
if CaptureOutputs /= TempVector.sevSegOut then
write (ErrorMsgLine, string'("Vector failed at "));
write (ErrorMsgLine, now);
writeline (output, ErrorMsgLine);
FoundError := true;
end if;
wait for SimLoopDelay;
end loop;
assert FoundError
report "No errors. All vectors passed."
severity note;
wait;
end process;
end testbench;
library ieee;
use ieee.std_logic_1164.all;
entity sevenSegment is port (
bcdInputs: in std_logic_vector (3 downto 0);
a_n, b_n, c_n, d_n,
e_n, f_n, g_n: out std_logic
);
end sevenSegment;
architecture behavioral of sevenSegment is
begin
bcd2sevSeg: process (bcdInputs) begin
-- Assign default to "off"
a_n <= '1'; b_n <= '1';
c_n <= '1'; d_n <= '1';
e_n <= '1'; f_n <= '1';
g_n <= '1';
case bcdInputs is
when "0000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
when "0001" =>
b_n <= '0'; c_n <= '0';
when "0010" =>
a_n <= '0'; b_n <= '0';
d_n <= '0'; e_n <= '0';
g_n <= '0';
when "0011" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
g_n <= '0';
when "0100" =>
b_n <= '0'; c_n <= '0';
f_n <= '0'; g_n <= '0';
when "0101" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; f_n <= '0';
g_n <= '0';
when "0110" =>
a_n <= '0'; c_n <= '0';
d_n <= '0'; e_n <= '0';
f_n <= '0'; g_n <= '0';
when "0111" =>
a_n <= '0'; b_n <= '0';
c_n <= '0';
when "1000" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
e_n <= '0'; f_n <= '0';
g_n <= '0';
when "1001" =>
a_n <= '0'; b_n <= '0';
c_n <= '0'; d_n <= '0';
f_n <= '0'; g_n <= '0';
when others =>
null;
end case;
end process bcd2sevSeg;
end behavioral;
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity ForceShare is port (
a,b,c,d,e,f: in std_logic_vector (7 downto 0);
result: out std_logic_vector(7 downto 0)
);
end ForceShare;
architecture behaviour of ForceShare is
begin
sum: process (a,c,b,d,e,f)
variable tempSum: std_logic_vector(7 downto 0);
begin
tempSum := a + b; -- temporary node for sum
if (tempSum = "10011010") then
result <= c;
elsif (tempSum = "01011001") then
result <= d;
elsif (tempSum = "10111011") then
result <= e;
else
result <= f;
end if;
end process;
end behaviour;
library IEEE;
use IEEE.std_logic_1164.all;
entity shifter is port (
clk, rst: in std_logic;
shiftEn,shiftIn: std_logic;
q: out std_logic_vector (15 downto 0)
);
end shifter;
architecture behav of shifter is
signal qLocal: std_logic_vector(15 downto 0);
begin
shift: process (clk, rst) begin
if (rst = '1') then
qLocal <= (others => '0');
elsif (clk'event and clk = '1') then
if (shiftEn = '1') then
qLocal <= qLocal(14 downto 0) & shiftIn;
else
qLocal <= qLocal;
end if;
end if;
q <= qLocal;
end process;
end behav;
library ieee;
use ieee.std_logic_1164.all;
entity lastAssignment is port
(a, b: in std_logic;
selA, selb: in std_logic;
result: out std_logic
);
end lastAssignment;
architecture behavioral of lastAssignment is
begin
demo: process (a,b,selA,selB) begin
if (selA = '1') then
result <= a;
else
result <= '0';
end if;
if (selB = '1') then
result <= b;
else
result <= '0';
end if;
end process demo;
end behavioral;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '0' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library ieee;
use ieee.std_logic_1164.all;
entity signalDemo is port (
a: in std_logic;
b: out std_logic
);
end signalDemo;
architecture basic of signalDemo is
signal c: std_logic;
begin
demo: process (a) begin
c <= a;
if c = '1' then
b <= a;
else
b <= '0';
end if;
end process;
end basic;
library IEEE;
USE IEEE.std_logic_1164.all;
package simPrimitives is
component OR2
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end component;
component SimDFF
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end component;
end simPrimitives;
library IEEE;
USE IEEE.std_logic_1164.all;
entity OR2 is
generic (tPD: time := 1 ns);
port (I1, I2: in std_logic;
Y: out std_logic
);
end OR2;
architecture simple of OR2 is
begin
Y <= I1 OR I2 after tPD;
end simple;
library IEEE;
use IEEE.std_logic_1164.all;
entity SimDFF is
generic(tCQ: time := 1 ns;
tS : time := 1 ns;
tH : time := 1 ns
);
port (D, Clk: in std_logic;
Q: out std_logic
);
end SimDff;
architecture SimModel of SimDFF is
begin
reg: process (Clk, D) begin
-- Assign output tCQ after rising clock edge
if (Clk'event and Clk = '1') then
Q <= D after tCQ;
end if;
-- Check setup time
if (Clk'event and Clk = '1') then
assert (D'last_event >= tS)
report "Setup time violation"
severity Warning;
end if;
-- Check hold time
if (D'event and Clk'stable and Clk = '1') then
assert (D'last_event - Clk'last_event > tH)
report "Hold Time Violation"
severity Warning;
end if;
end process;
end simModel;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until rising_edge(clk);
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
entity SRFF is port (
s,r: in std_logic;
clk: in std_logic;
q: out std_logic
);
end SRFF;
architecture rtl of SRFF is
begin
process begin
wait until clk = '1';
if s = '0' and r = '1' then
q <= '0';
elsif s = '1' and r = '0' then
q <= '1';
end if;
end process;
end rtl;
library IEEE;
use IEEE.std_logic_1164.all;
package scaleable is
component scaleUpCnt port (
clk: in std_logic;
reset: in std_logic;
cnt: in std_logic_vector
);
end component;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
use work.primitive.all;
entity scaleUpCnt is port (
clk: in std_logic;
reset: in std_logic;
cnt: out std_logic_vector
);
end scaleUpCnt;
architecture scaleable of scaleUpCnt is
signal one: std_logic := '1';
signal cntL: std_logic_vector(cnt'range);
signal andTerm: std_logic_vector(cnt'range);
begin
-- Special case is the least significant bit
lsb: tff port map (t => one,
reset => reset,
clk => clk,
q => cntL(cntL'low)
);
andTerm(0) <= cntL(cntL'low);
-- General case for all other bits
genAnd: for i in 1 to cntL'high generate
andTerm(i) <= andTerm(i - 1) and cntL(i);
end generate;
genTFF: for i in 1 to cntL'high generate
t1: tff port map (t => andTerm(i),
clk => clk,
reset => reset,
q => cntl(i)
);
end generate;
cnt <= CntL;
end scaleable;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "010";
constant Turn_Ar: targetFsmType := "110";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(3 downto 0);
constant Idle: targetFsmType := "0000";
constant B_Busy: targetFsmType := "0001";
constant Backoff: targetFsmType := "0011";
constant S_Data: targetFsmType := "1100";
constant Turn_Ar: targetFsmType := "1101";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "101";
constant Backoff: targetFsmType := "010";
constant S_Data: targetFsmType := "011";
constant Turn_Ar: targetFsmType := "110";
constant Dont_Care: targetFsmType := "XXX";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= Dont_Care;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Stop_n: out std_logic; -- PCI Stop#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
type targetFsmType is (Idle, B_Busy, Backoff, S_Data, Turn_Ar);
signal currState, nextState: targetFsmType;
begin
-- Process to generate next state logic
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
-- Process to register the current state
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
-- Process to generate outputs
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
-- Assign output ports
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
-- Incorporates Errata 10.1 and 10.2
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(4 downto 0);
constant Idle: integer := 0;
constant B_Busy: integer := 1;
constant Backoff: integer := 2;
constant S_Data: integer := 3;
constant Turn_Ar: integer := 4;
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
nextState <= (others => '0');
if currState(Idle) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
if currState(B_Busy) = '1' then
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState(Idle) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState(S_Data) <= '1';
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState(Backoff) <= '1';
else
nextState(B_Busy) <= '1';
end if;
end if;
if currState(S_Data) = '1' then
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState(Backoff) <= '1';
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState(Turn_Ar) <= '1';
else
nextState(S_Data) <= '1';
end if;
end if;
if currState(Backoff) = '1' then
if PCI_Frame_n = '1' then
nextState(Turn_Ar) <= '1';
else
nextState(Backoff) <= '1';
end if;
end if;
if currState(Turn_Ar) = '1' then
if (PCI_Frame_n = '0' and Hit = '0') then
nextState(B_Busy) <= '1';
else
nextState(Idle) <= '1';
end if;
end if;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= (others => '0'); -- per Errata 10.2
currState(Idle) <= '1';
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
OE_Trdy_n <= '0'; OE_Stop_n <= '0'; OE_Devsel_n <= '0'; -- defaults per errata 10.1
OE_AD <= '0'; LPCI_Trdy_n <= '1'; LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
if (currState(S_Data) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Backoff) = '1') then
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
end if;
if (currState(Turn_Ar) = '1') then
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
end if;
if (currState(Idle) = '1' or currState(B_Busy) = '1') then
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end if;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when IDLE =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when B_BUSY =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= IDLE;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= BACKOFF;
else
nextState <= B_BUSY;
end if;
when S_DATA =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and (LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= BACKOFF;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= TURN_AR;
else
nextState <= S_DATA;
end if;
when BACKOFF =>
if PCI_Frame_n = '1' then
nextState <= TURN_AR;
else
nextState <= BACKOFF;
end if;
when TURN_AR =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_BUSY;
else
nextState <= IDLE;
end if;
when others =>
nextState <= IDLE;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
-- Set default output assignments
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library IEEE;
use IEEE.std_logic_1164.all;
entity pci_target is port (
PCI_Frame_n: in std_logic; -- PCI Frame#
PCI_Irdy_n: in std_logic; -- PCI Irdy#
Hit: in std_logic; -- Hit on address decode
D_Done: in std_logic; -- Device decode complete
Term: in std_logic; -- Terminate transaction
Ready: in std_logic; -- Ready to transfer data
Cmd_Write: in std_logic; -- Command is Write
Cmd_Read: in std_logic; -- Command is Read
T_Abort: in std_logic; -- Target error - abort transaction
PCI_Clk: in std_logic; -- PCI Clock
PCI_Reset_n: in std_logic; -- PCI Reset#
PCI_Devsel_n: out std_logic; -- PCI Devsel#
PCI_Trdy_n: out std_logic; -- PCI Trdy#
PCI_Stop_n: out std_logic; -- PCI Stop#
OE_AD: out std_logic; -- PCI AD bus enable
OE_Trdy_n: out std_logic; -- PCI Trdy# enable
OE_Stop_n: out std_logic; -- PCI Stop# enable
OE_Devsel_n: out std_logic -- PCI Devsel# enable
);
end pci_target;
architecture fsm of pci_target is
signal LPCI_Devsel_n, LPCI_Trdy_n, LPCI_Stop_n: std_logic;
subtype targetFsmType is std_logic_vector(2 downto 0);
constant Idle: targetFsmType := "000";
constant B_Busy: targetFsmType := "001";
constant Backoff: targetFsmType := "011";
constant S_Data: targetFsmType := "110";
constant Turn_Ar: targetFsmType := "100";
signal currState, nextState: targetFsmType;
begin
nxtStProc: process (currState, PCI_Frame_n, Hit, D_Done, PCI_Irdy_n, LPCI_Trdy_n,
LPCI_Devsel_n, LPCI_Stop_n, Term, Ready) begin
case currState is
when Idle =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when B_Busy =>
if (PCI_Frame_n ='1' and D_Done = '1') or
(PCI_Frame_n = '1' and D_Done = '0' and LPCI_Devsel_n = '0') then
nextState <= Idle;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '0' or (Term = '1' and Ready = '1') ) then
nextState <= S_Data;
elsif (PCI_Frame_n = '0' or PCI_Irdy_n = '0') and Hit = '1' and
(Term = '1' and Ready = '0') then
nextState <= Backoff;
else
nextState <= B_Busy;
end if;
when S_Data =>
if PCI_Frame_n = '0' and LPCI_Stop_n = '0' and
(LPCI_Trdy_n = '1' or PCI_Irdy_n = '0') then
nextState <= Backoff;
elsif PCI_Frame_n = '1' and (LPCI_Trdy_n = '0' or LPCI_Stop_n = '0') then
nextState <= Turn_Ar;
else
nextState <= S_Data;
end if;
when Backoff =>
if PCI_Frame_n = '1' then
nextState <= Turn_Ar;
else
nextState <= Backoff;
end if;
when Turn_Ar =>
if (PCI_Frame_n = '0' and Hit = '0') then
nextState <= B_Busy;
else
nextState <= Idle;
end if;
when others =>
null;
end case;
end process nxtStProc;
curStProc: process (PCI_Clk, PCI_Reset_n) begin
if (PCI_Reset_n = '0') then
currState <= Idle;
elsif (PCI_Clk'event and PCI_Clk = '1') then
currState <= nextState;
end if;
end process curStProc;
outConProc: process (currState, Ready, T_Abort, Cmd_Write,
Cmd_Read, T_Abort, Term) begin
case currState is
when S_Data =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
if (Ready = '1' and T_Abort = '0' and (Cmd_Write = '1' or Cmd_Read = '1')) then
LPCI_Trdy_n <= '0';
else
LPCI_Trdy_n <= '1';
end if;
if (T_Abort = '1' or Term = '1') and (Cmd_Write = '1' or Cmd_Read = '1') then
LPCI_Stop_n <= '0';
else
LPCI_Stop_n <= '1';
end if;
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when Backoff =>
if (Cmd_Read = '1') then
OE_AD <= '1';
else
OE_AD <= '0';
end if;
LPCI_Stop_n <= '0';
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
if (T_Abort = '0') then
LPCI_Devsel_n <= '0';
else
LPCI_Devsel_n <= '1';
end if;
when Turn_Ar =>
OE_Trdy_n <= '1';
OE_Stop_n <= '1';
OE_Devsel_n <= '1';
when others =>
OE_Trdy_n <= '0';
OE_Stop_n <= '0';
OE_Devsel_n <= '0';
OE_AD <= '0';
LPCI_Trdy_n <= '1';
LPCI_Stop_n <= '1';
LPCI_Devsel_n <= '1';
end case;
end process outConProc;
PCI_Devsel_n <= LPCI_Devsel_n;
PCI_Trdy_n <= LPCI_Trdy_n;
PCI_Stop_n <= LPCI_Stop_n;
end fsm;
library ieee;
use ieee.std_logic_1164.all;
entity test is port (
a: in std_logic;
z: out std_logic;
en: in std_logic
);
end test;
architecture simple of test is
begin
z <= a when en = '1' else 'z';
end simple;
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.